iP-8xx7
iP-8417 CR is a four-slot programmable automation controller from the iPAC-8000 series, running embedded ISaGRAF Ver.3 SoftLogic to IEC 61131-3 on an 80186 CPU at 80 MHz under the MiniOS7 operating system. It suits engineers who want IEC 61131-3 control logic on a DIN-rail controller with local I/O expansion and several serial links.The unit provides four hot-swap slots for I-87K high profile serial I/O modules. Four serial ports (RS-232/485) allow connection to field devices and networks. Remote I/O is also supported through RS-485 modules from the I-7000 series, as well as RU-87Pn or I-87Kn expansion units.Data retention is handled by 512 KB of battery-backed SRAM, and each controller carries a 64-bit hardware serial number. The redundant power inputs accept +10 ~ 30 VDC. This is the RoHS version listed under the CR ordering code. ISaGRAF cannot run on 64-bit Windows 7/8 PCs, so check the programming workstation before commissioning.ApplicationsDistributed control with IEC 61131-3 logic using ISaGRAFRemote I/O networks using RS-485 I-7000 series modulesSerial data acquisition and control with I-87K expansion modules
The iP-8447 CR is a 4-slot programmable automation controller that runs embedded ISaGRAF Ver.3 SoftLogic, programmed to IEC 61131-3, on an 80186 80 MHz CPU under MiniOS7. It suits engineers who want a PLC-style controller that can host high-performance parallel I/O (I-8K) or serial I/O (I-87K) modules directly in its hot-swap slots, or reach remote I/O over RS-485.Connectivity is built around dual 10/100 Base-TX Ethernet ports and four serial ports (two RS-232, one RS-485 with 3000 VDC isolation, and one switchable RS-232/RS-485). The controller supports a broad protocol set, including Modbus TCP/IP Slave, Modbus RTU/ASCII Master, DCON, UDP, TCP Client, CAN/CANopen and FTP Client. Data is held in 512 KB of battery-backed SRAM, and each unit carries a 64-bit hardware serial number.Note that ISaGRAF cannot run on 64-bit Windows 7 or 8 PCs. Where a 64-bit Windows 7 or 8 workstation is in use, Win-GRAF is the appropriate programming environment.
iP-8817 CR is an 8-slot programmable automation controller that runs embedded ISaGRAF Ver.3 SoftLogic to IEC 61131-3 on an 80186 CPU clocked at 80 MHz under MiniOS7. It suits engineers who need PLC-style control logic with a rack of hot-swappable serial I/O modules in a single unit.The eight slots accept high profile I-87K serial I/O modules, and the I-8K series is also listed as a supported I/O type. Four serial ports (two RS-232, one isolated RS-485 and one switchable RS-232/RS-485) let the controller talk to field devices, while RS-485 remote I/O modules from the I-7000 series and expansion units (RU-87Pn or I-87Kn) extend the system further.Battery-backed SRAM retains data through power cycles, and the unit includes a 64-bit hardware serial number, a real-time clock, a watchdog timer and redundant power inputs. Note that ISaGRAF cannot run on 64-bit Windows 7 or 8 PCs; Win-GRAF is the suggested alternative for those systems.ApplicationsIndustrial control using IEC 61131-3 logic in ISaGRAFDistributed I/O with RS-485 remote I/O modules (I-7000 series)Serial I/O expansion with I-87K modules via RU-87Pn or I-87Kn expansion units
The iP-8847 CR is an 8-slot ISaGRAF-based Ethernet PAC for engineers who need IEC 61131-3 control logic running on an 80186 CPU at 80 MHz under MiniOS7. Embedded ISaGRAF Ver.3 SoftLogic handles the programming, while the eight hot-swap slots accept high profile I-87K serial I/O modules for expanding the system.Communications are covered by dual 10/100 Base-TX Ethernet ports, four serial ports (RS-232/RS-485) and a wide protocol set including Modbus TCP/IP, Modbus RTU, DCON, CAN/CANopen and UDP/TCP client and server functions. Battery-backed SRAM retains data through power loss, and redundant power inputs support higher availability designs.The ordering code carries the RoHS designation given in the source product description. Mechanical installation options are DIN-rail or wall mounting, with an operating temperature range of -25 ~ +75°C.ApplicationsMachine and process control using IEC 61131-3 logicDistributed I/O with I-87K serial modules and RS-485 remote I/OSerial device integration over RS-232/RS-485 and Modbus networks