WISE-7102 PoE Intelligent I/O Module, 3-ch AI, 6-ch DI, 3-ch Relay
PoE-powered WISE module with 3 analog inputs, 6 digital inputs and 3 power relay outputs, configured in a browser with IF-THEN-ELSE logic and Modbus TCP support.
- Browser-based configuration with IF-THEN-ELSE logic rules, no programming required
- 3 differential analog input channels, selectable from ±150 mV to ±10 V and ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA via jumpers
- 6 digital inputs (wet contact, sink/source) and 3 Form A power relay outputs rated 5.0 A per channel
- IEEE 802.3af-compliant PoE (Class 1) with 12 ~ 48 VDC auxiliary power option
- Modbus TCP protocol for SCADA system integration
- Timer, I/O channel monitoring and control, and non-SSL e-mail and CGI command functions
329,00 € per piece
| 1–9 pcs | 329,00 € | |
|---|---|---|
| 10–30 pcs | 319,00 € | −3 % |
| 31+ pcs | 312,00 € | −5 % |
Πληροφορίες για το προϊόν "WISE-7102 PoE Intelligent I/O Module, 3-ch AI, 6-ch DI, 3-ch Relay"
WISE-7102 CR is a standalone I/O controller from ICP DAS's WISE series, designed for remote logic control and monitoring. Control rules are set up through its built-in web interface, so no programming or additional software tool is needed. This makes it a practical choice where a fast, low-effort local control loop is required.
The module combines 3 differential analog input channels, 6 digital input channels and 3 power relay outputs (Form A, SPST N.O.) in a single unit. It can be powered over Ethernet to IEEE 802.3af (Class 1), or from a 12 ~ 48 VDC terminal block where PoE is not available, which helps reduce cabling and the need for dedicated outlets at the installation point.
For supervisory integration, the module supports Modbus TCP for SCADA system connectivity, along with CGI command sending and non-SSL e-mail notifications. It is well suited to building and factory automation, machine automation and remote maintenance or diagnosis tasks.
Applications
- Building Automation
- Factory Automation
- Machine Automation
- Remote Maintenance
- Remote diagnosis and Testing Equipment
| Product type: | Intelligent I/O Module |
|---|---|
| Interface: | Ethernet |
| Protocol: | Modbus TCP |
| Digital inputs: | 6 |
| Relay outputs: | 3 |
| Analog inputs: | 3 |
| Ports: | 1 |
| PoE: | Yes |
| Isolation: | 2500 VDC |
| Power input: | 12 ~ 48 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail, Wall |
Specifications
| Software | |
|---|---|
| Protocol | • Modbus TCP • CGI Command (Sending) |
| Function | • Web Interface for Configuration • IF-THEN-ELSE Logic operation (36 rule supported) • I/O channel monitoring and control • Timer operation (12 set supported) • Internal Register operation (48 set supported) • Recipe operation (12 set supported) • Advanced P2P (8 set supported) • non-SSL Email sending function |
| CPU Module | |
| CPU | 16-bit CPU (80 MHz) |
| Isolation | |
| Intra-module Isolation | 2500 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for each terminal and ±8 kV Air for random point |
| Surge (IEC 61000-4-5) | ±0.5 kV for Power Line |
| LED Indicators | |
| Status | 1 x PoE Power 1 x System Running 1 x Ethernet Link/Act 1 x Ethernet 10/100M Speed |
| Analog Input | |
| Channels | 3 (Differential) |
| Type | ±150mv, ±500mv, ±1 V, ±5 V, ±10 V ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA (Jumper Selectable) |
| Resolution | 16-bit |
| Accuracy | ±0.1% |
| Sampling Rate | 10 Sample/Sec. (Total) |
| Input Impedance | Voltage: 2 MΩ Current: 125 Ω |
| Common Mode Rejection | 86 dB Min. |
| Normal Mode Rejection | 100 dB |
| Overvoltage Protection | 240 Vrms |
| Overcurrent Protection | Yes, 50 mA max. at 110 VDC/VAC max. |
| Individual Channel Configuration | Yes |
| Open Wire Detection | Yes, for 4 ~ 20 mA only |
| Zero Drift | ±20 μV/°C |
| Span Drift | ±25 ppm/°C |
| Digital Input/Counter | |
| Channels | 6 |
| Type | Wet Contact |
| Sink/Source (NPN/PNP) | Sink/Source |
| ON Voltage Level | +10 VDC ~ +50 VDC |
| OFF Voltage Level | +4 VDC Max. |
| Max. Counts | 16-bit (65535) |
| Frequency | 50 Hz |
| Min. Pulse Width | 10 ms |
| Input Impedance | 10 KΩ, 0.5W |
| Overvoltage Protection | +70 VDC |
| Relay Output | |
| Channels | 3 |
| Type | Power Relay, Form A (SPST N.O.) |
| Contact Rating | Operating Voltage Range: 250 VAC/30 VDC Max Load Current: 5.0A/channel at 25°C Intra-module Isolation, Field to Logic: 3750 VDC |
| Operate Time | 6 ms (Typical) |
| Release Time | 3 ms (Typical) |
| Electrical Endurance | VDE: 5 A @ 250 VAC 30,000 ops. (10 ops./minute) at 75°C 5 A @ 30 VDC 70,000 ops. (10 ops./minute) at 75°C UL: 5 A @ 250 VAC/30 VDC 6,000 ops. 3 A @ 250 VAC/30 VDC 100,000 ops. |
| Mechanical Endurance | 20,000,000 ops. at no load (300 ops./minute) |
| Ethernet | |
| Ports | RJ-45 x 1, 10/100 Base-TX and automatic MDI/MDI-X |
| PoE | Yes |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | 12 ~ 48 VDC |
| Consumption | 3.4 W |
| Powered from PoE | Yes, IEEE 802.3af, Class 1 |
| Powered from Terminal Block | Yes, 12 ~ 48 VDC |
| Mechanical | |
| Dimensions (mm) | 72 x 123 x 35 (W x L x H) |
| Installation | DIN-Rail Mounting/Wall Mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Σύνδεση