U-7517M-10 OPC UA I/O Module, 10/20-ch Analog Input with PoE
OPC UA I/O module with 10 differential or 20 single-ended analog inputs, a dual-port Ethernet switch for daisy-chain wiring and IEEE 802.3af PoE. Supports OPC UA, MQTT and RESTful API.
- OPC UA Server/Client, MQTT Client and RESTful API (HTTP/HTTPS) running simultaneously
- 10/20 analogue input channels, software selectable as differential or single-ended
- 16-bit resolution with voltage and current ranges, including 4 to 20 mA with open wire detection
- Built-in dual-port 10/100 Base-TX switch for daisy-chain topology
- IEEE 802.3af (Class 3) PoE, with a +12 ~ +48 VDC terminal block as alternative supply
- Scaling, IF/THEN/ELSE logic rules and schedule function for local action
This item is quoted per order. Send us your quantity and we reply with price and delivery time.
Request a quote
Ni več na voljo
Informacije o izdelku "U-7517M-10 OPC UA I/O Module, 10/20-ch Analog Input with PoE"
U-7517M-10 CR is an OPC UA I/O module for collecting voltage and current signals and passing them to cloud platforms or field control systems. Its 16-bit analog inputs can be set in software to 10 differential or 20 single-ended channels, with ranges selected by jumper from ±150 mV up to 4 to 20 mA.
The built-in dual-port switch lets modules be daisy-chained, which reduces cabling and the number of switch ports needed. Power can be taken from a PoE network under IEEE 802.3af (Class 3), or from a +12 ~ +48 VDC terminal block, so one cable can carry both data and power.
Communication runs over OPC UA Server/Client, MQTT Client and RESTful API, and these can operate at the same time. Scaling, IF/THEN/ELSE rules, scheduled actions and I/O trigger messages are configured through the built-in web interface, with no additional app needed.
Applications
- Sending analogue measurements to cloud systems for display, analysis or strategy
- Feeding analogue readings into field control systems over OPC UA or MQTT
- Local rule-based control of I/O and virtual points
- Scheduled execution of control rules at set times
| Product type: | OPC UA I/O Module |
|---|---|
| Interface: | Ethernet |
| Protocol: | MQTT, OPC UA, RESTful API |
| Analog inputs: | 10/20 |
| Ports: | 2 |
| PoE: | IEEE 802.3af (Class 3) |
| Isolation: | 2500 VDC |
| Power input: | +12 ~ +48 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Specifications
| Software | |
|---|---|
| Protocol | • OPC UA Server / Client • MQTT Client • RESTful API |
| Function | • Web Interface for Configuration • Scaling • Security • Rule Setting • Schedule • Event Log • IoTstar Setting |
| CPU Module | |
| CPU | 32-bit CPU (400 MHz) |
| Watchdog Timer | Module, Communication (Programmable) |
| Isolation | |
| 2-way Isolation | I/O: 2500 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±2 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for each terminal ±8 kV Air for random point |
| Surge (IEC 61000-4-5) | ±2 kV for Power Line |
| LED Indicators | |
| Status | Run, Ethernet, I/O |
| Analog Input | |
| Channels | 10 differential or 20 single-ended (Note1), software selectable |
| Type | Voltage, Current |
| Range | ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V, ±20 mA, 0 to 20 mA, 4 to 20 mA (Jumper Selectable) |
| Resolution | 16-bit |
| Accuracy | Normal Mode: ±0.1% Fast Mode: ±0.5% or better |
| Sampling Rate | Normal Mode: 10 samples/second (Total) Fast Mode: 50 samples/second (Total) |
| Input Impedance | Voltage: 2 MΩ (Differential), 1 MΩ (Single-ended) Current: 125 Ω |
| Common Mode Rejection | 86 dB (min.) |
| Normal Mode Rejection | 100 dB |
| Common Voltage Protection | ±200 VDC |
| Overvoltage Protection | Differential: 240 Vrms Single-ended: 150 Vrms |
| Overcurrent Protection | 50 mA at 110 VDC (max.) |
| Individual Channel Configuration | Yes |
| Open Wire Detection | For 4 ~ 20 mA only |
| Zero Drift | ±20 μV/°C |
| Span Drift | ±25 ppm/°C |
| Isolation | ±400 VDC, Virtual Channel to Channel Isolation |
| Ethernet | |
| Ports | 2 x RJ-45, 10/100 Base-TX, Swtich Ports |
| PoE | Yes |
| LAN bypass | Yes |
| Access Control | ID, Password and IP Filter |
| Power | |
| Reverse Polarity Protection | Yes |
| Consumption | 5.5 W |
| Powered from PoE | IEEE 802.3af, Class3 |
| Powered from Terminal Block | +12 ~ +48 VDC |
| Mechanical | |
| Dimensions (mm) | 97 x 120 x 47 (W x L x H) |
| Installation | DIN-Rail mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Prijava