iWSN-110X-RCT1000PL-CT Self-Powered Current Sensing Module, 1-ch RCT Input
Self-powered 433 MHz wireless current sensing module with a 1000A Rogowski coil input, a split-core CT input and an expansion interface for energy monitoring.
- Self-powered from CT-induced current, with no separate power line required
- 1-ch Rogowski coil input, up to 1000A, Φ80mm coil with 4 m wire
- Split-core CT charging input, up to 400A, with 8 m wire
- 433 MHz RF with 16 channels, 4 group IDs and up to 64 RF sub-networks
- Expansion interface and DIP/rotary switch configuration
- Wall-mount or magnet adsorption installation
520,00 € per piece
| 1–9 pcs | 520,00 € | |
|---|---|---|
| 10–30 pcs | 504,00 € | −3 % |
| 31+ pcs | 494,00 € | −5 % |
Informácie o výrobku "iWSN-110X-RCT1000PL-CT Self-Powered Current Sensing Module, 1-ch RCT Input"
iWSN-110X-RCT1000PL-CT is an iWSN sensing module for AC current measurement that needs no mains supply connection. Its built-in Li-ion battery is charged from the current induced in the split-core CT, so the module can be deployed where running power cables is impractical.
Measurement is taken from a Rogowski coil input rated up to 1000A, with a split-core CT input that is used only to charge the battery. Results are sent over a 433 MHz RF link, configured by DIP and rotary switches. This ordering code includes the 1000A Rogowski coil and a 400A split-core CT.
- Self-powered operation from CT-harvested energy with a chargeable Li-ion battery
- 1-ch Rogowski coil input for up to 1000A, with a Φ80mm coil and 4 m wire
- Split-core CT for charging, supplied as Φ16mm (100A), Φ24mm (200A) or Φ36mm (400A) with 8 m wire
- 433 MHz RF communication with 16 channels and 4 group IDs, up to 64 RF sub-networks
- Expansion interface for additional flexibility
- Wall-mount or magnet installation
Applications
- Energy management and power monitoring
- Energy saving
- Big data analysis
- Predictive maintenance
| Product type: | Current sensing module |
|---|---|
| Interface: | 433 MHz RF |
| Analog inputs: | 2 current inputs |
| Power input: | Self-powered, Li-ion battery |
| Operating temperature: | 0 ~ +45 °C |
| Mounting: | Wall-mount or magnet |
Specifications
| Bus Interface | |
|---|---|
| Channels | 1 |
| Type | 4 pole 3.5mm audio cable with 25 cm wire lead |
| EMS Protection | |
| EFT (IEC 61000-4-4) | +/- 500 V |
| ESD (IEC 61000-4-2) | +/- 4 kV Contact |
| LED Indicators | |
| Status | 1 x Power 1 x STA |
| CT | |
| Rogowski Coil Channels | 1 |
| Rogowski Coil Type | Φ80mm (1000A); 4 m wire |
| Split-core CT Channels | 1 (for charging only) |
| Split-core CT Type | Φ16mm (100A), Φ24mm (200A), or Φ36mm (400A); 8 m wire |
| Input Voltage | Maximum 500VAC, 50/60 Hz |
| Accuracy | ±3% or ±2A |
| RF | |
| Channels | 0 ~ 15 configured by DIP switch |
| Group ID | 0 ~ 3 configured by DIP switch |
| Radio Frequency | 433.1000 ~ 434.6000 MHz |
| Transmission Power | 9±1dBm (PA Off) / 18±1dBm (PA On) |
| Transmission Distance (LoS) | 100 m |
| Node ID | 1 ~ 31 configured by DIP switch |
| Working Duty | 1 sec, 10 sec, 30 sec and 60 sec configured by DIP switch |
| Antenna | |
| Type | 0 dBi Omni directional PCB antenna |
| Power | |
| Consumption | 1-sec Tx Duty: 11 A 10-sec Tx Duty: 3 A 30-sec Tx Duty: 3 A 60-sec Tx Duty: 3A |
| Battery | Li-ion battery (compliant with UL1642) charged by CT induced current |
| Mechanical | |
| Dimensions (mm) | 85 x 152 x 25 (W x L x H) |
| Installation | Wall-mount or magnet adsorption |
| Environment | |
| Operating Temperature | 0 °C ~ +45 °C |
| Storage Temperature | -20 °C ~ +50 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Prihlásiť sa