MN-3257 Motionnet I/O Module, 32-ch Isolated Digital Output
Distributed Motionnet DO module with 32 isolated open-collector sink outputs, up to 200 mA per channel, RJ-45 Motionnet connectors and DIN-rail mounting for expanding control networks.
- 32 isolated open-collector sink digital outputs with internal flywheel diodes
- 200 mA maximum load current per channel, +30 VDC maximum load voltage
- Up to 64 modules per Motionnet line, expandable to 2048 output channels
- Motionnet transfer speed selectable at 2.5, 5, 10 or 20 Mbps by DIP switch
- 15.1 μs cyclic time per device at 20 Mbps
- Isolation between power, communication and I/O, 3000 Vrms on outputs
225,00 € per piece
| 1–9 pcs | 225,00 € | |
|---|---|---|
| 10–30 pcs | 218,00 € | −3 % |
| 31+ pcs | 214,00 € | −5 % |
Informácie o výrobku "MN-3257 Motionnet I/O Module, 32-ch Isolated Digital Output"
The MN-3257 CR is a Motionnet expansion module that adds 32 isolated digital outputs to a distributed control system. Each Motionnet transfer line can carry up to 64 modules, allowing output count to scale to 2048 channels on one line. Each module is updated automatically at a constant interval by the Motionnet system, so the controller does not need to poll it.
Each output is an open-collector sink type with an internal flywheel diode, rated at 200 mA maximum per channel and +30 VDC maximum load voltage. The flywheel diodes are grouped per port of 8 signals, and each port can be connected to a different power source. Interrupts can be set on chosen input points, which avoids wasted CPU time spent on repeated polling.
Isolation is provided between power, communication and I/O, rated at 3000 Vrms on the outputs. Two RJ-45 Motionnet connectors support daisy-chained wiring, transfer speed is selectable at 2.5, 5, 10 or 20 Mbps by DIP switch, and LED indicators show communication and I/O state. The plastic housing mounts on a DIN rail.
Applications
- Machine automation
- Distributed digital output expansion for Motionnet systems
| Product type: | I/O module |
|---|---|
| Interface: | RJ-45 |
| Protocol: | Motionnet |
| Digital outputs: | 32 |
| Ports: | 2 |
| Isolation: | 3000 Vrms |
| Power input: | 24 VDC |
| Operating temperature: | 0 ~ +60 °C |
| Mounting: | DIN-rail |
| Housing: | Plastic |
Specifications
| Hardware | |
|---|---|
| Connector | 13-pin pluggable terminal block x 4 |
| LED Indicators | |
| Status | Communication state (Link, Error) Internal 3.3 V Power Termination Resistor Switch Input/Output state |
| Digital Output | |
| Channels | 32 |
| Type | Open Collector (Sink), with internal flywheel diode |
| Load Voltage | +30 VDC max. |
| Load Current | 200 mA max. for each channel |
| Isolation | 3000 Vrms |
| Motionnet | |
| Communication Connectors | RJ-45 x 2 |
| Transfer Speed | Selectable 2.5, 5, 10 or 20 Mbps by DIP Switch. |
| Cyclic Time | 15.1 μs per device (20 Mbps) |
| Power | |
| Input Range | 24 VDC (1000 V isolated) |
| Consumption | 2 W Max. |
| Mechanical | |
| Casing | Plastic |
| Dimensions (mm) | 31 mm x 140 mm x 126.6 mm |
| Installation | DIN-Rail mounting |
| Environment | |
| Operating Temperature | 0 ~ +60 °C |
| Storage Temperature | -20 ~ +80°C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Prihlásiť sa