WISE-7126 PoE Intelligent I/O Module, 6-ch AI, 2-ch AO, 2-ch DI/DO
Intelligent WISE I/O module with 6 analogue inputs, 2 analogue outputs, 2 digital inputs, 2 digital outputs and IEEE 802.3af PoE. Browser-configured IF-THEN-ELSE logic and Modbus TCP.
- Browser-based configuration with no extra software tool required
- IF-THEN-ELSE logic rules (36 rules supported) with timer and I/O monitoring operations
- 6 differential analogue inputs, 16-bit resolution, jumper-selectable ±500 mV to ±10 V and ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA
- 2 analogue outputs, 12-bit resolution, jumper-selectable 0~5 VDC to ±10 VDC and 0~20 mA, 4~20 mA
- 2 digital inputs (dry and wet contact) and 2 isolated open-collector digital outputs, 700 mA per channel
- IEEE 802.3af-compliant PoE (Class 1) with 12 ~ 48 VDC terminal-block backup power
300,00 EUR per piece
| 1–9 pcs | 300,00 EUR | |
|---|---|---|
| 10–30 pcs | 291,00 EUR | −3 % |
| 31+ pcs | 285,00 EUR | −5 % |
Informații despre produs "WISE-7126 PoE Intelligent I/O Module, 6-ch AI, 2-ch AO, 2-ch DI/DO"
WISE-7126 CR is a browser-configured I/O module for remote control and monitoring. Its built-in web pages let you build IF-THEN-ELSE control logic without installing a software tool or writing code, which suits engineers who want to get a remote control point running quickly.
The module combines six differential analogue inputs, two analogue outputs, two digital inputs (dry and wet contact) and two isolated open-collector digital outputs. It takes power either from a IEEE 802.3af Class 1 PoE network over the Ethernet cable or from a 12 ~ 48 VDC terminal block, so it can run where no PoE is available.
For SCADA integration, the module supports Modbus TCP, and it can send non-SSL email and CGI commands. Its specified operating range of -25 ~ +75 °C and DIN-rail or wall mounting make it practical for industrial cabinets and remote installations.
Applications
- Building Automation
- Factory Automation
- Machine Automation
- Remote Maintenance
- Remote diagnosis and Testing Equipment
| Product type: | I/O module |
|---|---|
| Interface: | Ethernet |
| Protocol: | Modbus TCP |
| Digital inputs: | 2 |
| Digital outputs: | 2 |
| Analog inputs: | 6 |
| Analog outputs: | 2 |
| Ports: | 1 |
| PoE: | IEEE 802.3af |
| Isolation: | 2500 VDC |
| Power input: | 12 ~ 48 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail/Wall |
Specifications
| Software | |
|---|---|
| Protocol | • Modbus TCP • CGI Command (Sending) |
| Function | • Web Interface for Configuration • IF-THEN-ELSE Logic operation (36 rule supported) • I/O channel monitoring and control • Timer operation (12 set supported) • Internal Register operation (48 set supported) • Recipe operation (12 set supported) • Advanced P2P (8 set supported) • non-SSL Email sending function |
| CPU Module | |
| CPU | 16-bit CPU (80 MHz) |
| Isolation | |
| Intra-module Isolation | 2500 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for each terminal and ±8 kV Air for random point |
| Surge (IEC 61000-4-5) | ±0.5 kV for Power Line |
| LED Indicators | |
| Status | 1 x PoE Power 1 x System Running 1 x Ethernet Link/Act 1 x Ethernet 10/100M Speed |
| Analog Input | |
| Channels | 6 (Differential) |
| Type | ±500 mV, ±1 V, ±5 V, ±10 V ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA (Jumper Selectable) |
| Resolution | 16-bit |
| Accuracy | ±0.1% |
| Sampling Rate | 10 Sample/Sec. (Total) |
| Input Impedance | Voltage: 2 MΩ Current: 125 Ω |
| Common Mode Rejection | 86 dB Min. |
| Normal Mode Rejection | 100 dB |
| Common Voltage Protection | ±200 VDC |
| Overvoltage Protection | 240 Vrms |
| Overcurrent Protection | 50 mA Max. at 110 VDC/VAC Max. |
| Individual Channel Configuration | Yes |
| Channel-to-Channel Isolation | ±400 VDC |
| Open Wire Detection | Yes, for 4 ~ 20 mA only |
| Zero Drift | ±20 μV/°C |
| Span Drift | ±25 ppm/°C |
| Analog Output | |
| Channels | 2 |
| Type | 0~5 VDC, ± 5 VDC, 0~10 VDC, ± 10 VDC 0~20 mA, 4~20 mA (Jumper Selectable) |
| Resolution | 12-bit |
| Accuracy | ±0.1% of FSR |
| Open Wire Detection | Yes, for 4 ~ 20 mA only |
| Voltage Output Capability | 20 mA @ 10 V |
| Current Load Resistance | 500 Ω |
| Digital Input/Counter | |
| Channels | 2 |
| Type | Dry + Wet Contact |
| Sink/Source (NPN/PNP) | Dry: Source Wet: Sink/Source |
| ON Voltage Level | Dry: Close to GND Wet: +1 VDC Max. |
| OFF Voltage Level | Dry: Open Wet: + 3.5 VDC ~ + 30 VDC |
| Max. Counts | 16-bit (65535) |
| Frequency | 50 Hz |
| Min. Pulse Width | 10 ms |
| Effective Distance | 500M Max. |
| Overvoltage Protection | +30 VDC |
| Digital Output | |
| Channels | 2 |
| Type | Isolated Open Collector |
| Sink/Source (NPN/PNP) | Sink |
| Load Voltage | +5 VDC ~ +50 VDC |
| Load Current | 700 mA/Channel |
| Overvoltage Protection | 60 VDC |
| Overload Protection | 1.4 A |
| Short-circuit Protection | Yes |
| Ethernet | |
| Ports | RJ-45 x 1, 10/100 Base-TX and automatic MDI/MDI-X |
| PoE | Yes |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | 12 ~ 48 VDC |
| Consumption | 3.9 W |
| Powered from PoE | Yes, IEEE 802.3af, Class 1 |
| Powered from Terminal Block | Yes, 12 ~ 48 VDC |
| Mechanical | |
| Dimensions (mm) | 72 x 123 x 35 (W x L x H) |
| Installation | DIN-Rail Mounting/Wall Mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Login