Sari la conținutul principal Sari la căutare Sari la navigarea principală

PMD-2201-TC Power Meter Concentrator, 7" Touch Panel (Traditional Chinese)

Informații despre produs "PMD-2201-TC Power Meter Concentrator, 7" Touch Panel (Traditional Chinese)"

The PMD-2201-TC CR is a panel-mount power meter concentrator for engineers who need to collect, log and act on energy data without writing control software. Configuration is done in a browser or on the local 7" touch display, so logic, schedules and reports are set up through web pages rather than programmed. The -TC suffix identifies the Traditional Chinese variant.

The unit reads ICP DAS Modbus power meter modules and Modbus I/O modules over two RS-485 ports and one RJ-45 Ethernet port. Up to 24 power meter modules plus 8 I/O modules can be connected, subject to a maximum of 16 Modbus TCP modules in total. A built-in IF-THEN-ELSE logic engine supports power demand management, and I/O modules can be switched according to power status, for example to shed loads.

Measured values are logged to a microSD card, with data log files sent back automatically once a disconnected network is restored. Alarm messages can be sent via LINE, Telegram or Email, and the unit supports Modbus TCP/RTU, SNMP, FTP and MQTT for integration with SCADA, MES and IoT platforms, including Microsoft Azure and IBM Bluemix.

Applications

  • Energy measurement, monitoring and management
  • Power demand management and load shedding
  • Power usage efficiency (PUE) monitoring
Product type: Power Meter Concentrator
Interface: Ethernet, RS-485
Protocol: FTP, Modbus TCP/RTU, MQTT, SNMP
Ports: 3
PoE: IEEE 802.3af
Isolation: 2500 VDC (COM1, COM2)
Power input: 12 ~ 48 VDC
Operating temperature: -10 ~ +60 °C
Mounting: Panel, VESA (75 x 75)
Housing: Front panel NEMA 4/IP65

Specifications

Software
Protocol• Modbus TCP/RTU for SCADA software
• FTP Client & Server
• SNMP & SNMP Trap
• MQTT Client (Message Publish & Subscribe; non-SSL & SSL)
• DDNS
Function• Web Interface & Local Display for Configuration
• IF-THEN-ELSE Logic operation (Unlimited rule supported)
• Power meters & I/O modules monitoring and control
• Data Logger operation
• Timer operation (Unlimited set supported)
• Schedule operation (More Powerful; Unlimited set supported)
• Internal Register operation (70 set supported)
• Instant message sending function (LINE, Telegram)
• non-SSL & SSL Email sending function
• SNTP Time Synchronization
Power Management• Power Data Display
• Historical Power Data Report
• Power Demand Management
• PUE Setting and Display
IoT Service Integration• ICP DAS IoTstar IoT Cloud Management Software
• Microsoft Azure IoT Cloud platform
• IBM Bluemix IoT Cloud platform
CPU Module
CPU32-bit ARM CPU(1GHz)
Storage ExpansionmicroSD socket with 32 GB microSD card (support up to 32 GB microSDHC card)
Display
Size7" (16:9)
Backlight Life20,000 hrs
Brightness400 cd/m2
Resolution800 x 480
Touch Panel4-wire, resistive type; light transmission: 80 %
Contrast Ratio20.834027777778
LED Indicators
Status1 x Power
1 x Running
I/O Expansion
Remote Module SupportM-7000/DL/IR Series Module
Modbus RTU Slave Module
Modbus TCP Slave Module
Power MeterPM Series Modbus meter
Ethernet
PortsRJ-45 x 1, 10/100/1000 Base-TX (LED indicators) (Auto-negotiating, Auto MDI/MDI-X)
COM Ports
PortsCOM 1: RS-485 (Data+, Data-); 2500 VDC isolated
COM 2: RS-485 (Data+, Data-); 2500 VDC isolated
Power
Input Range12 ~ 48 VDC
Consumption6 W
Powered from PoEYes, IEEE 802.3af
Mechanical
Dimensions (mm)213 x 148 x 44 (W x H x D)
Panel Cut-out (mm)197 x 133, ±1 (W x H)
InstallationPanel Mounting, VESA (75 x 75) Mounting
Ingress Protection RatingFront panel: NEMA 4/IP65
Environment
Operating Temperature-10 ~ +60 °C
Storage Temperature-20 ~ +70 °C
Humidity10 ~ 90% RH, Non-condensing

Specifications as published by the manufacturer. Subject to change.

0 din 0 recenzii

Evaluarea medie de 0 din 5 stele

Lasă o recenzie!

Împărtășiți experiențele dvs. cu alți clienți.