M-6088-32 32-channel PWM Output Module, DCON/Modbus RTU RS-485
32-channel PWM output module with an RS-485 interface supporting DCON and Modbus RTU. Open-collector sink outputs at 200 mA per channel for controlling fans, lamps, motors and similar loads.
- 32 PWM output channels, open collector, sink type, 200 mA per channel
- Burst and continuous PWM modes, with individual and synchronous output control
- Duty cycle 0.1 ~ 99.9 % at 50 Hz, burst count 1 ~ 65535
- DCON and Modbus RTU protocols over one RS-485 port at 1200 ~ 115200 bps
- Hardware-configurable addresses for Modbus RTU communication
- Embedded dual watchdog for module and communication
254,00 EUR per piece
| 1–9 pcs | 254,00 EUR | |
|---|---|---|
| 10–30 pcs | 246,00 EUR | −3 % |
| 31+ pcs | 241,00 EUR | −5 % |
Informații despre produs "M-6088-32 32-channel PWM Output Module, DCON/Modbus RTU RS-485"
The M-6088-32 is a 32-channel pulse width modulation (PWM) output module for RS-485 networks. Each channel generates a waveform with a variable duty cycle and frequency from a digital output, which makes it a practical way to build cost-effective analogue control systems without dedicated analogue output hardware.
Channels can run in burst mode or continuous mode, depending on the control requirement. Outputs can be driven individually or synchronously, with a duty cycle range of 0.1 ~ 99.9 % and a burst count of 1 ~ 65535. Communication uses either DCON or Modbus RTU, and different addresses can be set by hardware to support Modbus RTU operation.
The module provides open-collector sink outputs rated +5 ~ +40 VDC at 200 mA per channel, with a power-on value and a safe value that can be set. Dual watchdog protection is built in, covering the module and communication, and intra-module isolation is rated 2500 VDC.
Applications
- Heating system control in buildings
- Ventilation system control
- Fan speed control
- Motor speed or position control
- Lamp brightness control
| Product type: | PWM Output Module |
|---|---|
| Interface: | RS-485 |
| Protocol: | DCON, Modbus RTU |
| Digital outputs: | 32 |
| Ports: | 1 |
| Isolation: | 2500 VDC |
| Power input: | +10 ~ +48 VDC |
| Operating temperature: | -25 ~ +75 °C |
Specifications
| CPU Module | |
|---|---|
| Watchdog Timer | Module, Communication (Programmable) |
| Isolation | |
| Intra-module Isolation | 2500 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±4 kV to Power |
| ESD (IEC 61000-4-2) | ±4 kV Contact for each Terminal |
| Surge (IEC 61000-4-5) | ±2 kV for Power Line |
| LED Indicators | |
| Status | 1 x Power and Communication |
| PWM | |
| Channels | 32 |
| Type | Open Collector |
| Sink/Source (NPN/PNP) | Sink |
| Load Voltage | +5 ~ +40 VDC |
| Load Current | 200 mA/channel |
| Frequency | 50 Hz |
| Duty Cycle | 0.1 ~ 99.9 % |
| Mode | Burst, Continuous |
| Burst Count | 1 ~ 65535 |
| Power-on Value | Yes |
| Safe Value | Yes |
| COM Ports | |
| Ports | 1 x RS-485 |
| Baud Rate | 1200 ~ 115200 bps |
| Data Format | (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1) |
| Protocol | Modbus RTU, DCON |
| Bias Resistor | No. Usually supplied by the RS-485 Master also add an optional tM-SG4 or SG-785. |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | +10 ~ +48 VDC |
| Consumption | 1.0 W max. |
| Mechanical | |
| Dimensions (mm) | 116 x 120 x 64 (W x L x H) |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -40 ~ +80 °C |
| Humidity | 10 ~ 95% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Login