I-7012F 1-ch Analog Input Module, Fast Sampling, DCON RS-485
16-bit single-channel analog input module for voltage and current signals, with 100 Hz fast sampling mode, DCON over RS-485 and 3000 VDC isolation for DIN-rail systems.
- 16-bit analog input with voltage ranges from ±150 mV to ±10 V and current input of ±20 mA
- Fast sampling mode up to 100 Hz, with 10 Hz normal mode
- One digital input configurable as a 50 Hz event counter
- Two open-collector digital outputs for high/low alarm use
- RS-485 interface using the DCON protocol at 1200 ~ 115200 bps
- 3000 VDC intra-module isolation and built-in dual watchdog
213,00 EUR per piece
| 1–9 pcs | 213,00 EUR | |
|---|---|---|
| 10–30 pcs | 207,00 EUR | −3 % |
| 31+ pcs | 202,00 EUR | −5 % |
Informații despre produs "I-7012F 1-ch Analog Input Module, Fast Sampling, DCON RS-485"
The I-7012F CR is a 1-channel analog input module that accepts voltage and current signals and reports them over an RS-485 DCON link. Its 16-bit resolution and switchable sampling modes suit engineers who need either precise readings at normal speed or faster updates when the process demands them.
Compared with the standard I-7012, this blue-cover variant offers a fast sampling mode of up to 100 Hz, selectable alongside a 10 Hz normal mode. It has no LED display, so it is a good choice where status is read remotely rather than on the module. The module also includes one digital input with a 50 Hz event counter and two open-collector digital outputs for high/low alarm purposes.
The module provides 3000 VDC intra-module isolation and dual watchdog protection, and is designed for DIN-rail mounting across a wide operating temperature range of -25 ~ +75 °C. Current inputs require an optional external 125 Ω resistor.
Applications
- Building automation
- Factory automation
- Machine automation
- Remote maintenance
- Remote diagnosis
- Testing equipment
| Product type: | Analog Input Module |
|---|---|
| Interface: | RS-485 |
| Protocol: | DCON |
| Digital inputs: | 1 |
| Digital outputs: | 2 |
| Analog inputs: | 1 |
| Ports: | 1 |
| Isolation: | 3000 VDC |
| Power input: | +10 ~ +30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Specifications
| CPU Module | |
|---|---|
| Watchdog Timer | Module, Communication (Programmable) |
| Display | |
| Type | 5-Digit 7 Segment LED Display (Only for I-7012FD, I-7012D) |
| Isolation | |
| Intra-module Isolation | 3000 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| ESD (IEC 61000-4-2) | ±2 kV Contact for Each Terminal |
| Surge (IEC 61000-4-5) | ±0.5 kV for Power Line |
| LED Indicators | |
| Status | 1 x Power and Communication |
| Analog Input | |
| Channels | 1 Differential |
| Type | Voltage Current |
| Range | Voltage: ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V Current: ±20 mA (requires an optional external 125 Ω resistor) |
| Resolution | 16-bit |
| Accuracy | I-7012F(D) Normal Mode: ±0.05% of FSR Fast Mode: ±0.25% of FSR I-7012(D) Normal Mode: ±0.05% of FSR |
| Sampling Rate | I-7012F(D) Normal Mode: 10 Hz Fast Mode: 100 Hz I-7012(D) Normal Mode: 10 Hz |
| Input Impedance | 20 MΩ |
| Common Voltage Protection | ±100 VDC |
| Overvoltage Protection | ±120 VDC |
| Digital Input/Counter | |
| Channels | 1 |
| Type | Dry Contact |
| Sink/Source (NPN/PNP) | Source |
| ON Voltage Level | Close to GND |
| OFF Voltage Level | Open |
| Max. Counts | 65535 (16-bit) |
| Frequency | 50 Hz |
| Input Impedance | 3 kΩ |
| Overvoltage Protection | ±30 VDC |
| Digital Output | |
| Channels | 2 |
| Type | Open Collector |
| Sink/Source (NPN/PNP) | Sink |
| Load Voltage | +3.5 ~ +30 VDC |
| Load Current | 30 mA/channel |
| Power on Value | Programmable |
| Safe Value | Programmable |
| COM Ports | |
| Ports | 1 x RS-485 |
| Baud Rate | 1200 ~ 115200 bps |
| Data Format | (N, 8, 1) |
| Protocol | DCON |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | +10 ~ +30 VDC |
| Consumption | I-7012/12F: 1.3 W I-7012D/12FD: 1.9 W |
| Mechanical | |
| Dimensions (mm) | 72 x 123 x 35 (W x L x H) |
| Installation | DIN-Rail Mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -40 ~ +85 °C |
| Humidity | 10 ~ 95% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Login