ET-7042 Ethernet I/O Module, 16-ch Sink-type Digital Output
16-channel sink-type digital output Ethernet I/O module with Modbus TCP and Modbus UDP support, a built-in web server and DIN-rail mounting for remote switching.
- 16 isolated sink-type digital output channels, +5 to +30 VDC load voltage, 100 mA per channel at 25°C
- Modbus TCP and Modbus UDP protocol support over one 10/100 Base-TX RJ-45 port
- Built-in web server with Web HMI
- Programmable power-on and safe values for each digital output
- Dual watchdog with communication security and ID, password and IP filter access control
- Direct drive of RM series relay modules for inductive loads
181,00 EUR per piece
| 1–9 pcs | 181,00 EUR | |
|---|---|---|
| 10–30 pcs | 175,00 EUR | −3 % |
| 31+ pcs | 172,00 EUR | −5 % |
Informații despre produs "ET-7042 Ethernet I/O Module, 16-ch Sink-type Digital Output"
The ET-7042 CR is an Ethernet I/O module that switches 16 sink-type digital outputs over a single 10/100 Base-TX RJ-45 port. Each output is an isolated open collector rated from +5 to +30 VDC, with up to 100 mA per channel at 25°C. Power-on and safe values for the outputs are programmable, so the module can drive known states when the network or host is unavailable.
Communication uses Modbus TCP or Modbus UDP, and the built-in web server provides a Web HMI for setup and monitoring without additional software. Access control is handled through ID, password and IP filtering. A module watchdog and a communication watchdog, both programmable, help maintain safe operation, and the I/O pair connection feature is available.
Isolation is rated at 1500 VDC on the Ethernet side and 2500 VDC on the I/O side. There is no channel-to-channel isolation. The module can drive the RM series relay modules directly to switch inductive loads. It is powered from +10 to +30 VDC through a terminal block with reverse polarity protection, draws 2.7 W maximum, and mounts on DIN rail.
Applications
- Building automation
- Factory automation
- Machine automation
- Remote maintenance
- Remote diagnosis
- Testing equipment
| Product type: | Ethernet I/O Module |
|---|---|
| Interface: | Ethernet |
| Protocol: | Modbus TCP, Modbus UDP |
| Digital outputs: | 16 |
| Ports: | 1 x RJ-45 |
| Isolation: | Ethernet 1500 VDC, I/O 2500 VDC |
| Power input: | +10 ~ +30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Specifications
| Software | |
|---|---|
| Built-in Web Server | Yes |
| CPU Module | |
| Watchdog Timer | Module, Communication (Programmable) |
| Isolation | |
| 2-way Isolation | Ethernet: 1500 VDC I/O: 2500 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for Each Terminal ±8 kV Air for Random Point |
| Surge (IEC 61000-4-5) | ±0.5 kV for Power Line |
| LED Indicators | |
| Status | Run, Ethernet |
| Digital Output | |
| Channels | 16 |
| Type | Isolated Open Collector |
| Sink/Source (NPN/PNP) | Sink |
| Load Voltage | +5 ~ +30 VDC |
| Load Current | 100 mA/channel at 25°C Direct Drive Power Relay Module |
| Power on Value | Programmable |
| Safe Value | Programmable |
| Ethernet | |
| Ports | 1 x RJ-45, 10/100 Base-TX |
| Access Control | ID, Password and IP Filter |
| Protocol | Modbus TCP, Modbus UDP |
| Power | |
| Reverse Polarity Protection | Yes |
| Consumption | 2.7 W (max.) |
| Powered from Terminal Block | +10 ~ +30 VDC |
| Mechanical | |
| Dimensions (mm) | 72 x 123 x 35 (W x L x H) |
| Installation | DIN-Rail mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Login