CAN-Logger100 1-Port CAN Bus Data Logger with SD Storage
1-port CAN bus data logger that time-stamps and stores CAN messages to SD/SDHC media, with USB 2.0 utility access and 3 kV galvanic isolation on the CAN port.
- Logs CAN 2.0A and 2.0B traffic to ISO 11898-2 on one M12 5-pin CAN port
- Time stamps every message at 10 us resolution, stored in binary format
- Receive throughput up to 15000 fps per channel
- Programmable baud rate from 10 kbps to 1 Mbps with acceptance filter configuration
- SD/SDHC storage: 4 GB default, up to 32 GB supported; overwrites when full
- 3 kV galvanic isolation on the CAN port (2500 Vrms photocoupler on the CAN side)
452,00 EUR per piece
| 1–9 pcs | 452,00 EUR | |
|---|---|---|
| 10–30 pcs | 438,00 EUR | −3 % |
| 31+ pcs | 429,00 EUR | −5 % |
Informații despre produs "CAN-Logger100 1-Port CAN Bus Data Logger with SD Storage"
The CAN-Logger100 CR records traffic from a CAN 2.0A/2.0B network on a single isolated CAN port, so engineers can capture bus activity without a PC attached for the whole session. Each message is time-stamped at 10 us resolution and written to an SD or SDHC card in binary format, ready for offline analysis.
Logging runs continuously and the device is configured through a supplied utility tool over its USB 2.0 High Speed port. The utility can also transmit and receive CAN messages, which helps when checking node behaviour during commissioning or fault finding. The CAN side offers a DIP-switch selectable 120 Ω terminal resistor, a programmable baud rate from 10 kbps to 1 Mbps and acceptance filter configuration.
The housing is metal and wall mountable, with an operating range of -25 ~ +75 °C. It can be powered from USB or from a +10 VDC to +30 VDC supply, which suits both bench use and fixed installations on a CAN network.
Applications
- CAN bus data collection and processing
- CAN network analysis and diagnostics
- Recording CAN message traffic for later review
| Product type: | CAN bus data logger |
|---|---|
| Interface: | CAN, USB 2.0 |
| Protocol: | CAN 2.0A/2.0B |
| Ports: | 1 |
| Isolation: | 3 kV galvanic (CAN port) |
| Power input: | +10 VDC ~ +30 VDC or USB |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | Wall mount |
| Housing: | Metal |
Specifications
| Data Logger | |
|---|---|
| Trigger | Log continuously |
| Time Stamp | 10 us |
| Storage Media | SD card, default: 4GB, max. support: 32 GB |
| File Format | Binary |
| Configuration | Utility tool |
| Mode | Overwrite when storage space is full |
| LED Indicators | |
| Status | 1 x Power 1 x Module status 1 x SD status 3 x CAN status |
| USB | |
| Specification | USB 2.0 High Speed |
| Transfer Speed | 480 Mbit/s, High Speed mode |
| Connector | 1 x USB (Type B) (Utility port) |
| Driver | Built-in Windows 7/8.1/10 |
| CAN | |
| Ports | 1 |
| Specification | ISO-11898-2, CAN 2.0A and CAN 2.0B |
| Baud Rate | 10 k ~ 1 M bps |
| Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for photocoupler |
| Terminal Resistor | DIP switch for the 120 Ω terminal resistor |
| Filter | Yes |
| Pin Assignment | 1 x 5-Pin male M12 |
| Data Flow | 15000 fps for Rx |
| Power | |
| Input Range | +10 VDC ~ +30 VDC or USB power delivery |
| Consumption | 2.5 W |
| Mechanical | |
| Casing | Metal |
| Dimensions (mm) | 102 x 102 x 44 (W x L x H) |
| Installation | Wall Mount |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Login