USB Converters

USB-2020 CR is a USB audio device that adds stereo line-out and microphone input to a host PC or industrial controller. It uses 16-bit delta-sigma converters and can drive headphones and passive speakers directly, so it suits compact audio paths without an external amplifier stage.Audio input supports 8, 11.025, 16, 22.05, 32, 44.1 and 48 kHz sampling, while output supports 32, 44.1 and 48 kHz, in mono or stereo. Volume and mute control are built in. The device is powered from a +10 VDC to +30 VDC terminal block and switches automatically between USB and external power.The unit installs as Plug-and-Play under Windows 2000 through Windows 10 and Linux. The XPAC-8000 already includes the USB-2020 driver. The order includes a CA-USB18 USB 2.0 A-male to B-male cable, 1.8 m long. The device is rated for DIN-rail mounting and carries CE, UKCA, FCC, RoHS and WEEE marks.ApplicationsAudio speaker systemsVoice systemsAudio monitoringExternal sound card for PCs

USB-2560 CR is a 4-port industrial USB 2.0 hub for adding several USB peripherals to a computer without relying on the host for power. It operates only in self-powered mode, drawing its supply from an external +10 ~ +30 VDC source, so downstream devices are not dependent on the computer's USB power budget.The hub is compliant with USB Specification Revision 2.0 and supports high-speed (480 Mbit/s), full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) transfers. Each downstream port can supply up to 500 mA, and a status LED for each port shows its operating state. The package includes a CA-USB18 USB 2.0 A-Male to B-Male cable, 1.8 m long, for connection to the host.The plastic housing mounts on DIN-rail and is rated for an operating range of 0 ~ +75 °C, making it suited to control cabinet installations where several USB devices need to be connected to an industrial PC or computer.ApplicationsConnecting multiple USB 2.0 peripherals to a computer in industrial control cabinetsExpanding USB port count on DIN-rail mounted industrial PCs and automation systems

The USB-2560/S CR adds four downstream USB 2.0 ports to a host computer, so several peripheral devices can be connected through a single upstream Type B port. It complies with USB Specification Revision 2.0 and operates at high-speed (480 Mbit/s), full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s).The hub works in self-powered mode only, taking its supply from an external +10 ~ +30 VDC source. The manufacturer notes that an externally powered hub gives the broadest compatibility for USB devices. Downstream port status is shown by LEDs, and the plastic housing mounts on a DIN-rail with an operating range of 0 ~ +75 °C.This code is supplied with the CA-USB18 cable (USB 2.0 A-Male to B-Male, 1.8 m) and the GPSU06U-6 power supply (6 W), so it is ready to connect out of the box.ApplicationsConnecting multiple USB 2.0 peripheral devices to a computerInstallation in industrial control cabinets on DIN-rail

The USB-2562M CR expands one USB 2.0 host connection into four downstream Type A ports, so several high-speed peripherals can be connected to a single computer in an industrial cabinet or control enclosure. It operates in high-speed mode at up to 480 Mbit/s and falls back to full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) operation for older devices.The hub runs only in self-powered mode, taking its supply from an external +10 ~ +30 VDC source rather than from the host port. Each downstream port can supply up to 500 mA, and per-port status LEDs show which connections are active. This arrangement is intended to give the widest compatibility with attached USB devices.The unit has a metal casing and mounts on a DIN rail. It is rated for an operating range of -25 ~ +75 °C and is supplied with a CA-USB18 cable (USB 2.0 A-male to B-male, 1.8 m) for connecting to the host.ApplicationsConnecting multiple USB 2.0 peripherals to a computer in industrial cabinetsAdding USB ports to DIN-rail mounted automation systems

USB-2562M/S is a self-powered 4-port USB 2.0 hub for connecting several USB peripherals to one host in industrial cabinets and control panels. It runs from a +10 ~ +30 VDC supply, so it does not draw power from the host computer, which helps keep connected devices working reliably.The hub supports high-speed (480 Mbit/s), full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) transfers, and each downstream port can supply up to 500 mA. LED indicators show the power state and the status of each downstream port, which simplifies commissioning and fault finding.The metal casing is designed for DIN-rail mounting and is rated for an operating temperature of -25 ~ +75 °C. This listing includes the CA-USB18 USB 2.0 A-male to B-male cable (1.8 m) and the GPSU06U-6 power supply, as stated in the price list description.ApplicationsConnecting multiple USB 2.0 peripherals to an industrial computer in a control cabinetAdding USB ports to automation and data acquisition systems mounted on DIN rail