MN-2091U Distributed Motionnet Single-axis Motion Control Module
Single-axis universal motion control slave module for Motionnet distributed motion networks, with 6.6 MHz pulse output and RJ-45 Motionnet connectors for servo and stepper drivers.
- Up to 64 single-axis modules per Motionnet line, at up to 20 Mbps
- Pulse output up to 6.6 MHz (max.) in OUT/DIR or CW/CCW mode
- Multi-axis linear and 2-axis circular interpolation
- T/S-curve acceleration and deceleration with on-the-fly speed and position changes
- Per-axis slow-down, home, positive and negative limit sensor inputs
- Software limit and compare trigger output
239,00 € per piece
| 1–9 pcs | 239,00 € | |
|---|---|---|
| 10–30 pcs | 231,00 € | −3 % |
| 31+ pcs | 227,00 € | −5 % |
Informacje dot. produktu "MN-2091U Distributed Motionnet Single-axis Motion Control Module"
The MN-2091U CR adds one axis of motion control to a Motionnet distributed motion network. Each module is a serial slave connected to the controller with standard Cat.5 LAN cable, and a single line can carry up to 64 single-axis modules, so axis count can grow as the machine does.
The 26-pin HD D-Sub connector links the module to servo and stepper drivers. Servo interface outputs include SVON, ERC and ALM_RST, while ALM, RDY and INP are read as inputs. Each axis also has limit, home, slow-down and emergency inputs. Motion profiles include trapezoidal and S-curve acceleration and deceleration, multi-axis linear and 2-axis circular interpolation, and on-the-fly speed and position changes.
Three-way isolation separates power, communication and I/O, which the manufacturer states improves noise immunity and protects the device. The module runs from a 24 VDC ±5% supply with a 1000 V isolated input and is rated for 0 to +60 °C operation.
Applications
- Distributed multi-axis motion control on a Motionnet fieldbus
- Machine automation with servo drivers
- Positioning axes driven by stepper drivers
- Highly integrated machine automation with reduced driver wiring
| Product type: | Motion control module |
|---|---|
| Interface: | RJ-45 |
| Protocol: | Motionnet |
| Ports: | 2 |
| Isolation: | 1000 V |
| Power input: | 24 VDC ±5% |
| Operating temperature: | 0 ~ +60 °C |
Specifications
| LED Indicators | |
|---|---|
| Status | Communication state (Link, Error) Internal 3.3 V Power Termination Resistor Switch Mechanic Switch Input |
| General | |
| Speed Profile | Trapezoidal/S-shaped Acc/Dec Driving |
| Auto-Home Search | 13 Types |
| Axis I/O | |
| Servo Interface Output | SVON, ERC, ALM_RST |
| Latch Input | Yes (shared with SD) |
| Mechanical Switch Input | LMT+, LMT-, HOME, SD, EMG |
| Position Compare Output | High-Speed 5 V TTL or 24 V open collector |
| Servo Interface Input | ALM, RDY, INP |
| Encoder Input | |
| Mode | CW/CCW, A/B phase |
| Counter Width | 28-bit |
| Pulse Output | |
| Mode | OUT/DIR, CW/CCW |
| Counter Width | 28-bit |
| Rate | 6.6 MHz (Max.) |
| Motionnet | |
| Communication Connectors | RJ-45 x2 |
| Transfer Speed | 2.5, 5, 10, 20 Mbps |
| Power | |
| Input Range | 24VDC +/-5% (1000 V isolated) |
| Environment | |
| Operating Temperature | 0 ~ +60 °C |
| Storage Temperature | -20 ~ +80°C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Zaloguj się