tPET-DA2 PoE Ethernet Analog Output Module, 2-ch Isolated AO
PoE-powered Ethernet module with two isolated analog outputs, selectable 0-10 V, 0-20 mA or 4-20 mA, supporting Modbus TCP/UDP, MQTT and SNMP V2c.
- Two analog output channels with voltage (0 ~ 10 V) and current (0 ~ 20 mA, 4 ~ 20 mA) ranges set per channel
- 12-bit resolution with ±0.1% of FSR accuracy
- Built-in web server for configuration, with password and IP filter access control
- Modbus TCP/UDP, MQTT and SNMP V2c protocol support
- Programmable power-on and safe values, plus dual-watchdog support
- PoE (IEEE 802.3af, Class 1) or +12 to +48 VDC terminal block power
153,00 € per piece
| 1–9 pcs | 153,00 € | |
|---|---|---|
| 10–30 pcs | 149,00 € | −3 % |
| 31+ pcs | 146,00 € | −5 % |
Produkta informācija "tPET-DA2 PoE Ethernet Analog Output Module, 2-ch Isolated AO"
tPET-DA2 CR is a compact Ethernet analog output module that drives two channels of voltage or current from a single RJ-45 port. Each output can be set to 0 ~ 10 V, 0 ~ 20 mA or 4 ~ 20 mA, which suits control valves, drives and other field devices that accept standard analogue setpoints.
The module can be powered over PoE (IEEE 802.3af, Class 1) or from a +12 to +48 VDC terminal block, and it is configured through its built-in web server. Modbus TCP/UDP, MQTT and SNMP V2c are supported, so the outputs can be commanded from SCADA, PLCs or IIoT platforms without a separate gateway.
Each channel is configured individually, with programmable power-on and safe values to define the outputs during start-up or communication loss. Dual-watchdog support, I/O pair connection and firmware updates over Ethernet help keep the installation maintainable.
Applications
- Industrial Automation
- Industrial Machinery
- Building Automation
- Food and Beverage Systems
- Semiconductor fabrication
- Control Systems
| Product type: | Ethernet I/O Module |
|---|---|
| Interface: | Ethernet, RJ-45 |
| Protocol: | Modbus TCP |
| Analog outputs: | 2 |
| Ports: | 1 |
| PoE: | Yes |
| Isolation: | 3000 VDC |
| Power input: | +12 to +48 VDC or PoE |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Specifications
| Software | |
|---|---|
| Built-in Web Server | Yes |
| CPU Module | |
| CPU | 32-bit MCU |
| Watchdog Timer | Module, Communication (Programmable) |
| Isolation | |
| 2-way Isolation | I/O: 3000 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for Each Terminal ±8 kV Air for Random Point |
| LED Indicators | |
| Status | Run, Ethernet, PoE |
| Analog Output | |
| Channels | 2 |
| Type | Voltage, Current |
| Range | Voltage: 0 ~ 10 V Current: 0 ~ +20 mA, +4 ~ +20 mA |
| Resolution | 12-bit |
| Accuracy | ±0.1% of FSR |
| Programmable Output Slope | Voltage: 0.0625 ~ 512 V/Second Current: 0.125 ~ 1024 mA/Second |
| Open Wire Detection | For 4 to 20 mA only |
| Voltage Output Capability | 10 V @ 10 mA |
| Current Load Resistance | 500 Ω |
| Individual Channel Configuration | Yes |
| Power-on Value | Programmable |
| Safe Value | Programmable |
| Ethernet | |
| Ports | 1 x RJ-45, 10/100 Base-Tx |
| PoE | Yes |
| Access Control | Password and IP Filter |
| Protocol | Modbus TCP, Modbus UDP, MQTT, and SNMP V2c |
| Power | |
| Reverse Polarity Protection | Yes |
| Consumption | 2.2 W |
| Powered from PoE | IEEE 802.3af, Class 1 |
| Powered from Terminal Block | +12 to +48 VDC |
| Mechanical | |
| Dimensions (mm) | 52 x 96 x 27 (W x L x H) |
| Installation | DIN-Rail mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 to 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Ienākt