e-USB404 4-Port USB 3.1 Gen 1 Expansion Module, e-Bus x4
4-port USB 3.1 Gen 1 expansion module for the e-Bus x4 slot of the AXP-9000-IoT PAC, providing up to 900 mA per port at 5 V for USB vision cameras and other USB devices.
- Four independent USB 3.1 Gen 1 host controllers, each with its own 5 Gbps SuperSpeed bandwidth
- Compatible with USB 3.1 Gen 1 (same as USB 3.0), with High Speed, Full Speed and Low Speed modes
- 5 V output up to 900 mA per port, with overload and short-circuit protection
- Per-port power on/off control through the SDK, for resetting USB devices after a failure
- LED power status indicator for each port
- Four USB Type-A connectors accessible on the panel
211,00 € per piece
| 1–9 pcs | 211,00 € | |
|---|---|---|
| 10–30 pcs | 205,00 € | −3 % |
| 31+ pcs | 201,00 € | −5 % |
Produkta informācija "e-USB404 4-Port USB 3.1 Gen 1 Expansion Module, e-Bus x4"
The e-USB404 CR adds four independent USB 3.1 Gen 1 host controllers to an AXP-9000-IoT Programmable Automation Controller through a single e-Bus x4 slot. It suits engineers who need several USB devices running at the same time, particularly USB vision cameras that generate large volumes of image data.
Each port has its own controller and an LED status indicator, and all four Type-A connectors are accessible on the panel for straightforward wiring. Each port supplies 5 V at up to 900 mA, with overload and short-circuit protection. Power to each port can be switched on and off in software through the SDK, which allows a hung USB device to be reset for failure recovery.
- Transfer modes: SuperSpeed (5 Gbps), High Speed (480 Mbps), Full Speed (12 Mbps) and Low Speed (1.5 Mbps)
- Supported on Microsoft Windows 7/8.1/10 and Linux
- Operating temperature -25 ~ +60 °C
Typical uses are frame grabbing in machine vision inspection, automated optical inspection, quality assurance and medical imaging.
Applications
- Machine vision inspection
- Automated optical inspection
- Quality assurance
- Medical imaging
| Product type: | Expansion module |
|---|---|
| Interface: | e-Bus x4, USB 3.1 Gen 1 |
| Ports: | 4 |
| Power input: | 4 W from e-Bus slot, 20 W external |
| Operating temperature: | -25 ~ +60 °C |
Specifications
| Software | |
|---|---|
| OS Support | Microsoft Windows 7/8.1/10 and Linux |
| SDK | Yes, USB power On/Off by API |
| Bus Interface | |
| Type | e-Busx4 |
| LED Indicators | |
| Status | 4 x Power Status for each USB port |
| USB | |
| Ports | 4 x USB 3.1 Gen 1 host controllers |
| Specification | Compliant with USB 3.1 Gen 1 Specification and Intel® x HCI Specification, Rev1.0 |
| Transfer Speed | SuperSpeed (5 Gbps), High Speed (480 Mbps), Full Speed (12 Mbps), Low Speed (1.5 Mbps) |
| Supply Current | 900 mA/5V Max. per port |
| Connector | 4 x USB Type-A Connector |
| Overload Protection | Yes |
| Short-circuit Protection | Yes |
| Power | |
| Reverse Polarity Protection | Yes |
| Consumption | 0.1 A @ 24 VDC without PD loading, 0.5A @ 24VDC with PD full loading (4.5W per ports) |
| Input Type | Max. 4 W USB Power from e-Bus Slot only Max. 20W USB Power from external Power |
| Mechanical | |
| Dimensions (mm) | 31 x 136 x 133 (W x L x H) |
| Environment | |
| Operating Temperature | -25 ~ +60 °C |
| Storage Temperature | -40 ~ +85 °C |
| Humidity | 10 ~ 90 % RH, non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Ienākt