WISE-7150 Intelligent I/O Module, 12 DI/6 DO with PoE
PoE-powered intelligent I/O module with 12 wet-contact digital inputs and 6 isolated open-collector outputs, configured in a browser and integrated over Modbus TCP.
- Browser-based configuration with no extra software tool required
- IF-THEN-ELSE logic rules (36 rules supported) without programming
- 12-channel isolated wet-contact digital inputs with counter input
- 6-channel isolated open-collector outputs, 100 mA per channel
- Modbus TCP protocol for SCADA system integration
- IEEE 802.3af PoE (Class 1) or 12 ~ 48 VDC terminal block power
210,00 € per piece
| 1–9 pcs | 210,00 € | |
|---|---|---|
| 10–30 pcs | 203,00 € | −3 % |
| 31+ pcs | 199,00 € | −5 % |
Produkta informācija "WISE-7150 Intelligent I/O Module, 12 DI/6 DO with PoE"
The WISE-7150 CR lets engineers build remote IF-THEN-ELSE control logic directly in a web browser, with no programming and no additional software tool. It combines 12 digital inputs and 6 digital outputs on one module, so local control and monitoring can run without a separate controller.
Power can come from IEEE 802.3af PoE over a standard Category 5 cable, or from a 12 ~ 48 VDC terminal block where PoE is not available. Each output channel drives up to 100 mA at 5 ~ 30 VDC, and the digital inputs support counter operation.
Modbus TCP support provides straightforward integration with SCADA systems. The CR ordering code carries the RoHS designation, and the module is listed with CE, UKCA, FCC, RoHS and WEEE certifications.
Applications
- Building Automation
- Factory Automation
- Machine Automation
- Remote Maintenance
- Remote diagnosis and Testing Equipment
| Product type: | Intelligent I/O Module |
|---|---|
| Interface: | Ethernet |
| Protocol: | Modbus TCP |
| Digital inputs: | 12 |
| Digital outputs: | 6 |
| Ports: | 1 |
| PoE: | Yes |
| Isolation: | 2500 VDC |
| Power input: | 12 ~ 48 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail, Wall |
Specifications
| Software | |
|---|---|
| Protocol | • Modbus TCP • CGI Command (Sending) |
| Function | • Web Interface for Configuration • IF-THEN-ELSE Logic operation (36 rule supported) • I/O channel monitoring and control • Timer operation (12 set supported) • Internal Register operation (48 set supported) • Recipe operation (12 set supported) • Advanced P2P (8 set supported) • non-SSL Email sending function |
| CPU Module | |
| CPU | 16-bit CPU (80 MHz) |
| Isolation | |
| Intra-module Isolation | 2500 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for each terminal and ±8 kV Air for random point |
| LED Indicators | |
| Status | 1 x PoE Power 1 x System Running 1 x Ethernet Link/Act 1 x Ethernet 10/100M Speed |
| Digital Input/Counter | |
| Channels | 12 |
| Type | Wet Contact |
| Sink/Source (NPN/PNP) | Sink/Source |
| ON Voltage Level | +10 VDC ~ +50 VDC |
| OFF Voltage Level | +4 VDC Max. |
| Max. Counts | 16-bit (65535) |
| Frequency | 50 Hz |
| Min. Pulse Width | 10 ms |
| Input Impedance | 10 kΩ |
| Overvoltage Protection | +70 VDC |
| Digital Output | |
| Channels | 6 |
| Type | Isolated Open Collector |
| Sink/Source (NPN/PNP) | Sink |
| Load Voltage | +5 VDC ~ +30 VDC |
| Load Current | 100 mA/Channel at 25 °C Direct Drive Power Relay Module |
| Overvoltage Protection | 60 VDC |
| Overload Protection | 1.3 A |
| Short-circuit Protection | Yes |
| Ethernet | |
| Ports | RJ-45 x 1, 10/100 Base-TX and automatic MDI/MDI-X |
| PoE | Yes |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | 12 ~ 48 VDC |
| Consumption | 2.4 W |
| Powered from PoE | Yes, IEEE 802.3af, Class 1 |
| Powered from Terminal Block | Yes, 12 ~ 48 VDC |
| Mechanical | |
| Dimensions (mm) | 72 x 123 x 35 (W x L x H) |
| Installation | DIN-Rail Mounting/Wall Mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Ienākt