F-8017CH Redundant 8-ch Isolated Current Input Module with HART Master
Redundant 8-channel isolated 4~20 mA analogue input module with a built-in HART master for remote device maintenance and diagnosis in iDCS-8000 systems.
- 8 isolated current input channels for 4~20 mA signals with ±25% overrange
- 16-bit resolution and ±0.05% FSR accuracy
- Built-in HART master for remote device maintenance, monodrop topology
- Redundancy with fast switching time of <100us
- 3000 VDC isolation from output to backplane and to frame ground
- 500 Samples/sec total sampling rate
591,00 € per piece
| 1–9 pcs | 591,00 € | |
|---|---|---|
| 10–30 pcs | 574,00 € | −3 % |
| 31+ pcs | 562,00 € | −5 % |
Produkta informācija "F-8017CH Redundant 8-ch Isolated Current Input Module with HART Master"
The F-8017CH CR is an 8-channel analogue input module for 4~20 mA current loops, designed for applications where signal integrity and remote access to field instruments both matter. Its 16-bit differential inputs offer ±0.05% FSR accuracy, and a 25% overrange allows measurement beyond the nominal span, although accuracy is not guaranteed in that region.
A built-in HART master lets you communicate with compatible field devices in a monodrop (point-to-point) topology, so configuration and diagnostic data can be read remotely without a separate HART modem. Redundancy support and a fast switchover time of under 100us help keep the I/O path available in critical installations.
Each channel is isolated with 3000 VDC from the output and backplane bus, and from frame ground. Faults on a channel are contained, so they should not propagate to other components in the iDCS-8000 system. The CR ordering code is supplied as the 8-ch isolated current input redundant module with HART master interface, RoHS compliant.
Applications
- Building Automation
- Factory Automation
- Machine Automation
- Remote Maintenance
- Remote Diagnosis
- Testing Equipment
| Product type: | Analog Input Module |
|---|---|
| Protocol: | HART |
| Analog inputs: | 8 |
| Isolation: | 3000 VDC |
| Operating temperature: | -25 ~ +75 °C |
Specifications
| EMS Protection | |
|---|---|
| EFT (IEC 61000-4-4) | Yes |
| ESD (IEC 61000-4-2) | Yes |
| LED Indicators | |
| Status | 1 x RUN, 1 x ACT, 1 x DUX and Communication (32 as channel 0~31 status) |
| Analog Input | |
| Channels | 8 |
| Type | 4 ~ 20 mA (Support ±25% overrange) |
| Range | -2500 ~ 12500 (0~24mA) |
| Resolution | 16 bit |
| Accuracy | ±0.05% FSR |
| Sampling Rate | 500 Samples/sec(Total) |
| Input Impedance | 120 Ω |
| Common Mode Rejection | 86 dB |
| Normal Mode Rejection | 100 dB |
| Overcurrent Protection | Yes (Switching time < 100us) |
| Zero Drift | ±20 μV/°C |
| Isolation | 3000 VDC |
| I/O Expansion | |
| I/O Type | DN-AIH-08 |
| HART | |
| Topology | Master, Monodrop (Point-to-Point) |
| Power | |
| Consumption | 1.2 W + 7.5W Max. |
| Mechanical | |
| Dimensions (mm) | 30 x 85 x 115 |
| Environment | |
| Operating Temperature | -25 °C ~ +75 °C |
| Humidity | 5 ~ 95% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Ienākt