WISE-7105 Intelligent I/O Module, 8-ch Thermistor Input, 4-ch DO, PoE
Web-configured WISE I/O module with 8 differential thermistor inputs, 4 isolated open-collector outputs and IEEE 802.3af PoE, with Modbus TCP for SCADA integration.
- Browser-based configuration with no extra software tool required
- IF-THEN-ELSE logic rules (36 rules supported) configured without programming
- 8-channel differential thermistor input, 16-bit resolution, individually configurable per channel
- 4 isolated open-collector digital outputs, 700 mA per channel, with overload and short-circuit protection
- Modbus TCP support for SCADA system integration
- IEEE 802.3af-compliant Power over Ethernet, with 12 ~ 48 VDC terminal block as alternative power input
320,00 € per piece
| 1–9 pcs | 320,00 € | |
|---|---|---|
| 10–30 pcs | 311,00 € | −3 % |
| 31+ pcs | 304,00 € | −5 % |
Info sui prodotti "WISE-7105 Intelligent I/O Module, 8-ch Thermistor Input, 4-ch DO, PoE"
The WISE-7105 CR is a web-configurable I/O module that combines 8 differential thermistor inputs and 4 isolated open-collector digital outputs in a single unit. Configuration runs in a standard browser, so no additional software tool is needed, and IF-THEN-ELSE control logic is set up through the web pages rather than by writing code.
Each analogue channel can be given its own input range, and the module supports I/O monitoring and control, timer operations, and non-SSL email and CGI command sending. Modbus TCP is provided for integration with SCADA systems.
Power can be taken from an IEEE 802.3af (Class 1) PoE network over a single Ethernet cable, or from a 12 ~ 48 VDC terminal block where PoE is not available, which helps reduce cabling and simplify installation in space-constrained cabinets.
Applications
- Building automation
- Factory automation
- Machine automation
- Remote maintenance
- Remote diagnosis and testing equipment
| Product type: | I/O module |
|---|---|
| Interface: | Ethernet |
| Protocol: | Modbus TCP |
| Digital outputs: | 4 |
| Analog inputs: | 8 |
| Ports: | 1 |
| PoE: | Yes |
| Isolation: | 2500 VDC |
| Power input: | 12 ~ 48 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail, Wall |
Specifications
| Software | |
|---|---|
| Protocol | • Modbus TCP • CGI Command (Sending) |
| Function | • Web Interface for Configuration • IF-THEN-ELSE Logic operation (36 rule supported) • I/O channel monitoring and control • Timer operation (12 set supported) • Internal Register operation (48 set supported) • Recipe operation (12 set supported) • Advanced P2P (8 set supported) • non-SSL Email sending function |
| CPU Module | |
| CPU | 16-bit CPU (80 MHz) |
| Isolation | |
| Intra-module Isolation | 2500 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for each terminal and ±8 kV Air for random point |
| LED Indicators | |
| Status | 1 x PoE Power 1 x System Running 1 x Ethernet Link/Act 1 x Ethernet 10/100M Speed |
| Analog Input | |
| Channels | 8 (Differential) |
| Type | Thermistor (Precon ST-A3, Fenwell U, YSI L100, YSI L300,YSI L1000, YSI B2252, YSI B3000, YSI B5000,YSI B6000, YSI B10000, YSI H10000,YSI H30000) |
| Resolution | 16-bit |
| Accuracy | ±0.1% or better |
| Sampling Rate | 10 Sample/Sec. (Total) |
| Common Mode Rejection | 86 dB |
| Normal Mode Rejection | 100 dB |
| Overvoltage Protection | 110 VDC/VAC |
| Individual Channel Configuration | Yes |
| Open Wire Detection | Yes |
| Zero Drift | ±20 μV/°C |
| Span Drift | ±25 ppm/°C |
| Digital Output | |
| Channels | 4 |
| Type | Isolated Open Collector |
| Sink/Source (NPN/PNP) | Sink |
| Load Voltage | +5 VDC ~ +50 VDC |
| Load Current | 700 mA/Channel |
| Overvoltage Protection | 60 VDC |
| Overload Protection | 1.4 A |
| Short-circuit Protection | Yes |
| Ethernet | |
| Ports | RJ-45 x 1, 10/100 Base-TX and automatic MDI/MDI-X |
| PoE | Yes |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | 12 ~ 48 VDC |
| Consumption | 3.0 W |
| Powered from PoE | Yes, IEEE 802.3af, Class 1 |
| Powered from Terminal Block | Yes, 12 ~ 48 VDC |
| Mechanical | |
| Dimensions (mm) | 72 x 123 x 35 (W x L x H) |
| Installation | DIN-Rail Mounting/Wall Mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Login