ISA

The A-812PG is an ISA bus multifunction board for PC/AT compatible computers. It combines 16 single-ended 12-bit analogue inputs, two 12-bit analogue outputs, 16 digital inputs and 16 digital outputs on one card, so engineers can handle acquisition, voltage output and TTL-level digital I/O in a single slot.Analogue inputs sample at up to 62.5 kS/s with software programmable gain of 1, 2, 4, 8 and 16. Acquisition can be started by software, pacer, external or event triggers, and data can be moved by polling, interrupt or DMA. A timer/counter channel is also included.The A-812PG CR is the RoHS-labelled ordering option of this board. Listed certifications are CE, UKCA, FCC, RoHS and WEEE, and the operating temperature range is 0 ~ +60 °C.ApplicationsSignal analysisIndustrial automationLaboratory automationSensor interfaceFFT and frequency analysisTransient analysisProduction testProcess control

The A-821PGH CR is a 12-bit multifunction data acquisition board for PC/AT compatible computers with an ISA bus. It combines a fast analogue input stage, a single analogue output channel and TTL-level digital I/O on one card, which suits engineers who need signal capture and simple control from a single slot.The analogue inputs can be configured as 16 single-ended or 8 differential channels, sampling at up to 45 kS/s. The PGH version offers software-programmable gains of 1, 10, 100 and 1000, with input ranges of ±5 V, ±0.5 V, ±0.05 V and ±0.005 V. Triggering is available by software or pacer, with data transfer by polling or interrupt. A 16-bit timer/counter channel is also provided.Connection is through a 37-pin D-Sub connector, and the CA-4002 D-Sub connector is included with this ordering code. The board is rated for an operating temperature of 0 ~ +60°C and carries CE, UKCA, FCC and WEEE marks.ApplicationsSignal analysisIndustrial automationLaboratory automationSensor interfaceFFT & frequency analysisTransient analysisProduction testProcess control

The A-821PGH/S CR is a 12-bit multifunction data acquisition board for PC/AT compatible computers with an ISA bus. It combines 16 single-ended or 8 differential analogue inputs with one 12-bit analogue output, 16 digital inputs and 16 digital outputs, and a 16-bit timer/counter channel, all on one board.The analogue inputs sample at up to 45 kS/s and support software, pacer, external and event triggering. Data can be transferred by polling, interrupt or DMA, which suits both simple monitoring and time-critical acquisition. The A-821PGH variant of this series offers software-programmable gains of 1, 10, 100 and 1000.This ordering code is supplied with a DB-8225 terminal board and a CA-3710 D-Sub cable, rather than the CA-4002 D-Sub connector listed for the base A-821PGH. The board carries CE, UKCA, FCC and WEEE marks and operates from 0 ~ +60 °C.ApplicationsSignal analysisIndustrial automationLaboratory automationSensor interfaceFFT & frequency analysisTransient analysisProduction testProcess control

The A-821PGL is a 12-bit ISA bus multifunction board for engineers who need analogue acquisition, analogue output and digital I/O in a single PC expansion card. It provides 16 single-ended or 8 differential analogue inputs sampling at up to 45 kS/s, making it suited to signal analysis and transient capture.The low gain version offers software programmable gains of 1, 2, 4 and 8 for the analogue input channels. Several trigger sources are available, including software, pacer, external and event triggers, and data can be moved by polling, interrupt or DMA. The board also includes an analogue output with 0 ~ 5 V and 0 ~ 10 V ranges, along with 16 digital inputs and 16 digital outputs at 5 V/TTL levels and one 16-bit timer/counter channel.This ordering code includes one CA-4002 D-Sub connector for field wiring. The board is specified for an operating temperature of 0 ~ +60 °C.ApplicationsSignal analysisIndustrial automationLaboratory automationSensor interfaceFFT and frequency analysisTransient analysisProduction testProcess control

The A-821PGL/S CR is a 12-bit multifunction data acquisition board for PC/AT compatible computers with an ISA bus. It combines 16 single-ended or 8 differential analogue inputs, an analogue output with 0 ~ 5 V and 0 ~ 10 V ranges, and 16 digital inputs and 16 digital outputs on a single card, which suits engineers who need mixed analogue and digital I/O in one PC slot.The A-821PGL version provides software programmable gains of 1, 2, 4 and 8 on the analogue inputs, with a maximum sampling rate of 45 kS/s. Several trigger modes (software, pacer, external and event) and data transfer modes (polling, interrupt and DMA) allow the acquisition to be matched to the timing needs of the application.The listing for this ordering code includes a DB-8225 terminal board and a CA-3710 D-Sub cable, giving a ready-to-wire option for connecting field signals to the board.ApplicationsSignal analysisIndustrial automationLaboratory automationSensor interfaceFFT & frequency analysisTransient analysisProduction testProcess control

A-823PGH CR is a 12-bit multifunction analogue and digital I/O board for PC/AT compatible computers with an ISA bus. It combines a 16-channel analogue input section, two analogue output channels, and 16 digital inputs and 16 digital outputs on a single card, which suits engineers who need mixed signal acquisition and control in one slot.The analogue inputs can be configured as 16 single-ended or 8 differential channels, and the A-823PGH variant offers a high programmable gain set from 0.5 to 1000. Acquisition supports software, pacer, external and event triggering, with data transfer by polling, interrupt or DMA. DMA level (1 or 3) and interrupt line (between 3 and 15) are set by jumper.The board ships with one CA-4002 D-Sub connector and uses a 37-pin D-Sub connector on the card. It is listed with CE, UKCA, RoHS and WEEE certification.ApplicationsSignal analysisIndustrial automationLaboratory automationSensor interfaceFFT & frequency analysisTransient analysisProduction testProcess control

A-823PGH/S is a PC/AT compatible ISA bus data acquisition board that combines analogue input, analogue output and digital I/O on a single card. It suits engineers who need to capture fast analogue signals and control or monitor digital lines from one slot.The analogue inputs can be configured as 16 single-ended or 8 differential channels, with 12-bit resolution and a maximum sampling rate of 125 kS/s. The PGH variant offers software-programmable gains of 0.5, 1, 5, 10, 50, 100, 500 and 1000. Two 12-bit analogue output channels support several voltage ranges, including unipolar and bipolar settings with an external reference option.Acquisition can be started by software, pacer, external or event triggers, and data can be moved by polling, interrupt or DMA. The board also provides 16 DI and 16 DO channels, with a 37-pin D-Sub connector for field wiring.ApplicationsSignal analysisIndustrial automationLaboratory automationSensor interfaceFFT and frequency analysisTransient analysisProduction testProcess control

The ISO-813 CR is an ISA bus data acquisition board for PC/AT compatible computers. It provides 32 single-ended analogue input channels with a 12-bit A/D converter, and its 3000 Vrms isolation makes it suited to electrically demanding industrial installations.Engineers will find the board useful for voltage measurement across a range of bipolar and unipolar input spans, with programmable gain and software-triggered acquisition using polling data transfer. It is backward compatible with the 813 family, which may simplify migration of existing software.Typical uses include programmable voltage sources, programmable current sinks, harsh environment operation and process control.The ordering code ISO-813 CR is listed as phased out. The similar ISO-813/S is noted in the source data for reference.ApplicationsProgrammable voltage sourceProgrammable current sinkHarsh environment operationProcess control

The ISO-813/S CR is a bus-type, isolated 12-bit analogue input board for PC/AT compatible computers. It provides 32 single-ended channels, programmable gain and software-triggered polled acquisition, making it suited to engineers adding isolated analogue measurement to an ISA-based system.Isolation is rated at 3000 Vrms through a built-in DC/DC converter, which protects the host computer from the signal side in electrically noisy or demanding environments. Input ranges run from ±10 V down to ±0.625 V bipolar and 0 ~ 10 V down to 0 ~ 0.3125 V unipolar, with gains from 0.5 to 16. The board is backward compatible with the 813 family.This /S variant is supplied with a DB-8325 terminal board and a CA-3710 D-Sub cable, according to the price list. Operating temperature is 0 ~ +60 °C, with storage between -20 and +70 °C and humidity of 5 to 85% RH, non-condensing.ApplicationsProgrammable voltage sourceProgrammable current sinkHarsh environment operationProcess control

The ISO-AD32L is a bus-type isolated 12-bit A/D board for PC/AT compatible computers. It offers 32 single-ended or 16 differential analogue input channels, with a maximum sampling rate of 200 kS/s. The low-gain (L) version suits engineers who need isolated multi-channel acquisition in a single ISA slot.An on-board 1024-sample FIFO supports gap-free A/D conversion, quoted at 200 kS/s for a single channel and 100 kS/s when scanning channels. Channel selection, gain, input type and operating mode are set in software, so board parameters can be changed without hardware adjustment. The board uses polled data transfer.Isolation is provided by a built-in DC/DC converter rated at 1000 VDC, with 5000 Vrms photo-isolation protection and inputs that tolerate up to 500 Vrms common-mode voltage. The CA-4002 D-Sub connector is included with the board.ApplicationsData acquisitionWaveform analysisHarsh environment operationSignal isolation

ISO-AD32L/S is a bus-type isolated 12-bit analogue input board for PC/AT compatible computers with an ISA slot. It offers 32 single-ended or 16 differential channels, a maximum sampling rate of 200 kS/s and an on-board 1024-sample FIFO that supports gap-free conversion.Channel selection, gain, input type and operating mode are all set in software, so the board suits engineers who need to scan channels with automatic gain control rather than rewire inputs. The built-in DC/DC converter provides 1000 VDC isolation, and the inputs tolerate up to 500 Vrms of common-mode voltage, which makes the board relevant to signal isolation in noisy or harsh environments.This variant ships with a DN-37 terminal board and a CA-3710 D-Sub cable, so it is ready to wire to field signals. The board carries CE, UKCA, FCC and WEEE marks and is rated for 0 ~ +60 °C operation.ApplicationsData acquisitionWaveform analysisHarsh environment operationSignal isolation