I-7590 RS-232/422/485 to M-Bus Converter for M-Bus Slave Devices
Converts RS-232, RS-422 or RS-485 serial traffic to an M-Bus network for reading meters and sensors. Serial and M-Bus baud rates are set independently using rotary switches.
- Serial port selectable as RS-232, RS-422 or RS-485
- Serial and M-Bus baud rates configurable separately, with 10 default and 6 user-defined baud rates
- Supports up to 100 M-Bus slaves
- Transparent communication between the serial bus and M-Bus
- 3750 Vrms photocoupler isolation on the M-Bus port
- Overcurrent and short-circuit protection on the M-Bus port
278,00 € per piece
| 1–9 pcs | 278,00 € | |
|---|---|---|
| 10–30 pcs | 269,00 € | −3 % |
| 31+ pcs | 264,00 € | −5 % |
Info sui prodotti "I-7590 RS-232/422/485 to M-Bus Converter for M-Bus Slave Devices"
The I-7590 bridges a serial host to M-Bus (Meter-Bus) slave devices. It accepts RS-232, RS-422 or RS-485 on the serial side and passes data through to the M-Bus network, so a standard serial master can poll energy counters, water and gas meters, and other M-Bus instruments without a custom protocol stack.
Serial and M-Bus baud rates can be configured separately. Ten default baud rates and six user-defined rates are available, allowing the converter to match a wide range of meter configurations. Transparent communication means the converter does not alter the data stream, and it supports up to 100 M-Bus slaves.
For reliability in the field, the M-Bus port has 3750 Vrms photocoupler isolation along with overcurrent and short-circuit protection. The unit also includes a watchdog, reverse polarity protection on the power input, and firmware can be updated through the RS-232 port. It mounts on DIN-rail and is rated for -25 ~ +75 ℃ operation.
Applications
- Remote reading of energy counters
- Hot and cold water meter reading
- Gas meter and gas counter reading
- Pressure sensors and actuators on M-Bus networks
| Product type: | Converter |
|---|---|
| Interface: | RS-232/422/485 |
| Protocol: | M-Bus |
| Ports: | 1 |
| Isolation: | 3750 Vrms |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Specifications
| COM Ports | |
|---|---|
| Ports | 1 x RS-232/485/422, Non-isolated |
| Baud Rate | 300 ~ 115200 bps |
| Parity | None, Even, Odd, Mark, Space |
| Data Bit | 5, 6, 7, 8 |
| Stop Bit | 1, 2 |
| M-Bus | |
| Ports | 1 |
| Baud Rate | 300 ~ 2400 bps and user-defined baud rate |
| Data Bit | 5, 6, 7, 8 |
| Stop Bit | 1, 2 |
| Parity | None, Even, Odd, Space, Mark |
| Isolation | 3750 Vrms for photo-couple |
| Current Protection | short-circuit protection |
| Power | |
| Consumption | 1.8 W @ 24 VDC (with 1 slave device), 11.8 W @ 24 VDC (with 100 slave devices) |
| Mechanical | |
| Dimensions (mm) | 72 x 120 x 36 (W x H x D) |
| Installation | DIN-Rail |
| Environment | |
| Operating Temperature | -25 ~ +75 ℃ |
| Storage Temperature | -30 ~ +80 ℃ |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Login