ET-7052 Ethernet I/O Module, 8-ch DI / 8-ch DO with Modbus TCP and UDP
Ethernet I/O module with 8 wet-contact digital inputs (32-bit counter capable) and 8 source-type digital outputs, supporting Modbus TCP and Modbus UDP for DIN-rail installation.
- 8 wet-contact digital inputs, each selectable as a 32-bit counter (500 Hz frequency)
- 8 source-type digital outputs, isolated open-collector, 650 mA per channel at 25 °C
- Programmable power-on and safe values for digital outputs
- Modbus TCP and Modbus UDP support over a 1 x RJ-45, 10/100 Base-TX port
- Built-in web server and web HMI
- Dual watchdog (module and communication, programmable)
181,00 € per piece
| 1–9 pcs | 181,00 € | |
|---|---|---|
| 10–30 pcs | 175,00 € | −3 % |
| 31+ pcs | 172,00 € | −5 % |
Informations sur le produit "ET-7052 Ethernet I/O Module, 8-ch DI / 8-ch DO with Modbus TCP and UDP"
The ET-7052 CR is an Ethernet remote I/O module that combines eight wet-contact digital inputs, each usable as a 32-bit counter, with eight source-type digital outputs. Each output channel can drive a load of up to 650 mA, and the power-on and safe values of the outputs are programmable, so the module can be configured to hold a defined state if communication is lost.
Its built-in web server and web HMI allow configuration and monitoring from a browser, while Modbus TCP and Modbus UDP provide straightforward integration with supervisory systems and controllers. Optical isolation rated at 2500 VDC on the I/O and 1500 VDC on the Ethernet side supports use where hazardous voltages are present, although channel-to-channel isolation is not provided.
Suitable for building, factory and machine automation, remote maintenance and diagnosis, and test equipment, the ET-7052 CR mounts on a DIN rail and operates from a +10 ~ +30 VDC terminal block supply across a -25 ~ +75 °C operating range.
Applications
- Building automation
- Factory automation
- Machine automation
- Remote maintenance
- Remote diagnosis
- Testing equipment
| Product type: | Ethernet I/O Module |
|---|---|
| Interface: | 10/100 Base-TX), Ethernet (1 x RJ-45 |
| Protocol: | Modbus TCP, Modbus UDP |
| Digital inputs: | 8 |
| Digital outputs: | 8 |
| Ports: | 1 |
| Isolation: | 2500 VDC (I/O), 1500 VDC (Ethernet) |
| Power input: | +10 ~ +30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Specifications
| Software | |
|---|---|
| Built-in Web Server | Yes |
| CPU Module | |
| Watchdog Timer | Module, Communication (Programmable) |
| Isolation | |
| 2-way Isolation | Ethernet: 1500 VDC I/O: 2500 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for Each Terminal ±8 kV Air for Random Point |
| Surge (IEC 61000-4-5) | ±0.5 kV for Power Line |
| LED Indicators | |
| Status | Run, Ethernet |
| Digital Input/Counter | |
| Channels | 8 |
| Type | Wet Contact |
| Sink/Source (NPN/PNP) | Sink/Source |
| ON Voltage Level | +10 ~ +50 VDC |
| OFF Voltage Level | +4 VDC (max.) |
| Max. Counts | 4,294,967,295 (32-bit) |
| Frequency | 500 Hz |
| Min. Pulse Width | 1 ms |
| Input Impedance | 10 KΩ |
| Overvoltage Protection | +70 VDC |
| Digital Output | |
| Channels | 8 |
| Type | Isolated Open Collector |
| Sink/Source (NPN/PNP) | Source |
| Load Voltage | +10 ~ +40 VDC |
| Load Current | 650 mA/channel at 25°C |
| Overvoltage Protection | +47 VDC |
| Short-circuit Protection | Yes |
| Power on Value | Programmable |
| Safe Value | Programmable |
| Ethernet | |
| Ports | 1 x RJ-45, 10/100 Base-TX |
| Access Control | ID, Password and IP Filter |
| Protocol | Modbus TCP, Modbus UDP |
| Power | |
| Reverse Polarity Protection | Yes |
| Consumption | 2.5 W (max.) |
| Powered from Terminal Block | +10 ~ +30 VDC |
| Mechanical | |
| Dimensions (mm) | 72 x 123 x 35 (W x L x H) |
| Installation | DIN-Rail mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Connexion