USB-2060 USB I/O Module, 6-ch Isolated DI and 6-ch Relay Output
USB bus-powered I/O module with 6 digital inputs (dry or wet contact) and 6 Form A relay outputs. Plug-and-play USB 2.0 interface with 1.5M cable included in USB-2060 CR.
- Six isolated digital inputs selectable for dry or wet contact via wire connections
- Six Form A (SPST-NO) relay outputs rated 5 A at 24 VDC or 250 VAC
- All digital input channels usable as 32-bit counters, up to 500 Hz
- USB 2.0 Full-Speed (12Mbps) interface, bus powered with no external supply needed
- Hardware and programmable software watchdogs with configurable power-on and safe values
- Plug-and-play operation without driver, with a utility tool for configuration and I/O testing
141,00 € per piece
| 1–9 pcs | 141,00 € | |
|---|---|---|
| 10–30 pcs | 137,00 € | −3 % |
| 31+ pcs | 134,00 € | −5 % |
Informations sur le produit "USB-2060 USB I/O Module, 6-ch Isolated DI and 6-ch Relay Output"
The USB-2060 CR adds six digital inputs and six relay outputs to a PC over USB 2.0 Full-Speed, with no external power supply required as the module is powered from the USB bus. It suits I/O expansion where a simple plug-and-play connection is preferred over a dedicated controller or fieldbus card.
Each digital input can be wired as a dry or wet contact, and all six channels can operate as 32-bit counters with a maximum frequency of 500 Hz. The relay outputs are Form A (SPST-NO) rated at 5 A, and the module provides configurable power-on and safe values together with a hardware and a programmable software watchdog to keep outputs in a known state if communication fails.
A utility tool is supplied for configuration and quick I/O testing, and an API library with demos and source code is provided for Windows and Linux developers working in VB, C++, C#.NET, VB.NET or LabVIEW. This variant includes a 1.5M USB cable (CA-USB15), and the module is locked in place with a lockable USB cable.
Applications
- Building automation
- Factory automation
- Machine automation
- Testing equipment
| Product type: | USB I/O Module |
|---|---|
| Interface: | USB 2.0 |
| Digital inputs: | 6 |
| Relay outputs: | 6 |
| Isolation: | Isolated |
| Power input: | USB bus powered |
| Operating temperature: | -25 ~ +75 °C |
Specifications
| CPU Module | |
|---|---|
| Watchdog Timer | 1 Hardware watchdog (1.6 second) 1 Software watchdog (Programmable) |
| EMS Protection | |
| ESD (IEC 61000-4-2) | 4 kV contact for each terminal 8 kV air for random point |
| LED Indicators | |
| Status | 3 x Power and Communication 6 x Power Relay 6 x Digital Input |
| Digital Input/Counter | |
| Channels | 6 |
| Type | Dry Contact, Wet Contact |
| Sink/Source (NPN/PNP) | Dry: Source Wet: Sink/Source |
| ON Voltage Level | Dry: Close to GND Wet: +10 VDC ~ +50 VDC |
| OFF Voltage Level | Dry: Open Wet: +4 VDC Max. |
| Max. Counts | 32-bit |
| Frequency | 500 Hz |
| Min. Pulse Width | 1 ms |
| Effective Distance | 500 meters Max. |
| Input Impedance | 10 KΩ |
| Overvoltage Protection | 70 VDC |
| Relay Output | |
| Channels | 6 x Form A (SPST-NO) |
| Contact Rating | DC: 5 A @ 24 VDC AC: 5 A @ 250 VAC (47 ~ 63 Hz) |
| Operate Time | 10 ms (Max.) |
| Release Time | 5 ms (Max.) |
| Electrical Endurance | 1 x 10^5 ops |
| Mechanical Endurance | 2 x 10^7 ops |
| Power on Value | Yes, Programmable |
| Safe Value | Yes, Programmable |
| USB | |
| Specification | USB 2.0 Full-Speed (12Mbps) |
| Power | |
| Consumption | 1.5 W |
| Mechanical | |
| Dimensions (mm) | 33 x 110 x 96 (W x L x H) |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -40 ~ +85 °C |
| Humidity | 10 ~ 95% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Connexion