PEX-DA4 PCI Express Analog Output Board, 4-ch 14-bit AO
PEX-DA4 CR is a PCI Express x1 analog output board with four 14-bit channels, each individually set to ±10 V voltage or 0 to 20 mA current output.
- Four 14-bit analogue output channels, each individually configurable as ±10 V voltage or 0 to 20 mA current output
- Software calibration with calibration data stored in EEPROM, no jumpers or trim-pots required
- 4-bit Card ID switch to identify boards when two or more cards are installed
- Drop-in replacement for the PIO-DA series without software or driver changes
- 16-channel 5 V digital input and 16-channel 5 V digital output, both at 500 kHz typical response speed
- Accuracy of 0.04% of FSR ±2 LSB at 25 °C for the ±10 V range
363,00 € per piece
| 1–9 pcs | 363,00 € | |
|---|---|---|
| 10–30 pcs | 352,00 € | −3 % |
| 31+ pcs | 345,00 € | −5 % |
Informations sur le produit "PEX-DA4 PCI Express Analog Output Board, 4-ch 14-bit AO"
The PEX-DA4 CR is a PCI Express x1 data acquisition board providing four 14-bit analogue output channels for engineers who need flexible signal generation in a PC. Each channel can be configured individually as a voltage output (±10 V) or a current output (0 to 20 mA, sink), so a single board can drive mixed signal types without hardware changes.
Calibration is performed in software rather than with jumpers or trim-pots, and the calibration data is stored in EEPROM for long-term use. The board also includes a 4-bit Card ID switch so that individual cards can be identified in software when two or more boards are installed in the same computer. The PEX-DA series is designed as a direct replacement for the PIO-DA series, requiring no modification to existing software or drivers.
Besides the four analogue outputs, the board provides 16 digital inputs and 16 digital outputs, both 5 V, with 500 kHz typical response speed, plus three 16-bit timer/counter/frequency channels. It ships with one CA-4002 D-Sub connector, and is CE, UKCA, FCC, RoHS and WEEE certified.
Applications
- High speed data acquisition system
- Process monitoring and control
- Vibration analysis
- Digital pattern generation from digital I/O port
| Product type: | PCI Express DAQ board |
|---|---|
| Interface: | PCI Express x1 |
| Digital inputs: | 16 |
| Digital outputs: | 16 |
| Analog outputs: | 4 |
| Operating temperature: | 0 ~ +60 °C |
Specifications
| Hardware | |
|---|---|
| Connector | Female DB37 x 1 20-pin Box header x 2 |
| Card ID | Yes (4-bit) |
| Analog Output | |
| Channels | PEX-DA4 : 4 PEX-DA8 : 8 PEX-DA16 : 16 |
| Range | Voltage: ± 10 V Current: 0 ~ 20 mA |
| Resolution | 14-bit |
| Accuracy | 0.04% of FSR ± 2 LSB @ 25 °C, ± 10 V |
| Response Time | 166 kHz (Typical) |
| Voltage Output Capability | ±5 mA |
| Slew Rate | 0.71 V/μs |
| Operation Mode | Static Update |
| Digital Input | |
| Channels | 16 |
| Type | 5 V/TTL |
| ON Voltage Level | 2.0 V Min. |
| OFF Voltage Level | 0.8 V Max. |
| Response Speed | 500 kHz (Typical) |
| Trigger Mode | Static Update |
| Digital Output | |
| Channels | 16 |
| Type | 5 V/CMOS |
| Operation Mode | Static Update |
| Load Voltage | Logic 0: 0.1 V Max. Logic 1: 4.4 V Min. |
| Load Current | Sink: 6 mA @ 0.33 V Source: 6 mA @ 4.77 V |
| Response Speed | 500 kHz (Typical) |
| Timer/Counter/Frequency | |
| Channels | 3 |
| Type | 5 V/TTL |
| Resolution | 16-bit |
| Reference Clock | Internal: 4 MHz |
| PC Bus | |
| Type | PCI Express x 1 |
| Data Bus | 8-bit |
| Power | |
| Consumption | PEX-DA4 : 750 mA@ +3.3 V, 350 mA@ +12 V PEX-DA8 : 750 mA@ +3.3 V, 400 mA@ +12 V PEX-DA16 : 750 mA@ +3.3 V, 550 mA@ +12 V |
| Mechanical | |
| Dimensions (mm) | 116.4 x 172.6 x 22 (W x L x D) |
| Environment | |
| Operating Temperature | 0 ~ +60°C |
| Storage Temperature | -20 ~ +70°C |
| Humidity | 5 ~ 85% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Connexion