I-8028UW-G 8-ch Isolated Analog Output Module, 16-bit Voltage/Current
8-channel isolated analog output module with individually configurable 0 to 10 VDC, ±10 VDC and 0 to 20 mA or 4 to 20 mA outputs, 16-bit resolution and 2500 VDC intra-module isolation.
- Eight single-ended analog outputs, each configurable as voltage or current
- Output ranges of 0 to 5 VDC, ±5 VDC, 0 to 10 VDC, ±10 VDC, 0 to 20 mA and 4 to 20 mA
- Individual channel configuration with jumper-selectable voltage or current output
- 16-bit resolution with ±0.02% of FSR accuracy
- Short circuit protection on outputs and open wire detection for 4 to 20 mA
- Configurable power-on and safe values
356,00 € per piece
| 1–9 pcs | 356,00 € | |
|---|---|---|
| 10–30 pcs | 345,00 € | −3 % |
| 31+ pcs | 338,00 € | −5 % |
Informations sur le produit "I-8028UW-G 8-ch Isolated Analog Output Module, 16-bit Voltage/Current"
I-8028UW-G is an 8-channel analog output module from the I-8K/I-87K High Profile series for PAC and remote I/O systems. Each of its eight single-ended channels drives either a voltage or a current signal, so one module can serve mixed field devices such as valves, drives and indicators without needing separate hardware for each signal type.
Output ranges are set per channel, covering 0 to 5 VDC, ±5 VDC, 0 to 10 VDC, ±10 VDC, 4 to 20 mA and 0 to 20 mA. Power-on and safe output values can be configured, so outputs can start from a defined level and fall back to a known state. Open wire detection is provided for the 4 to 20 mA range, and each output is protected against short circuits.
The module suits data acquisition, process monitoring and control, vibration analysis and factory automation tasks where galvanic separation and 16-bit output resolution are required. Isolation is rated at 3000 VDC for the external power supply and 2500 VDC between internal sections, and the module is qualified for ±4 kV ESD protection on each terminal.
Applications
- Data acquisition systems
- Process monitoring and control
- Vibration analysis
- Factory automation
| Product type: | Analog output module |
|---|---|
| Isolation: | 3000 VDC |
| Power input: | +15 ~ +30 VDC |
| Operating temperature: | -25 ~ +75 °C |
Specifications
| Isolation | |
|---|---|
| Intra-module Isolation | 2500 VDC |
| EMS Protection | |
| ESD (IEC 61000-4-2) | ± 4 kV Contact for Each Terminal |
| LED Indicators | |
| Status | 1 x Power and Communication |
| Analog Output | |
| Channels | 8 Source |
| Range | Voltage: 0 ~ +5 VDC、±5 VDC、0 ~ +10 VDC、±10 VDC Current: 0 ~ +20 mA、+4 ~ +20 mA |
| Resolution | 16-bit |
| Accuracy | ±0.02% of FSR |
| Zero Drift | ±0.2 μV/°C |
| Span Drift | ±25 ppm/°C |
| Short Circuit Protection | Yes |
| Response Time | 105 us per channel |
| Programmable Output Slope | Voltage: 0.5 V/us Current: 0.024 mA/us |
| Power-on Value | Yes |
| Safe Value | Yes |
| Power | |
| Reverse Polarity Protection | Yes |
| Isolation | 3000 VDC |
| Consumption | 2 W Max. |
| Powered from Terminal Block | +15 ~ +30 VDC |
| Mechanical | |
| Dimensions (mm) | 31 x 129 x 115 (W x L x H) |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -40 ~ +85 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Connexion