Passer au contenu principal Passer à la recherche Passer à la navigation principale

ET-7044 Ethernet I/O Module, 8-ch DI and 8-ch DO, Modbus TCP

Informations sur le produit "ET-7044 Ethernet I/O Module, 8-ch DI and 8-ch DO, Modbus TCP"

ET-7044 CR is a DIN-rail Ethernet I/O module that pairs eight wet-contact digital inputs with eight sink-type digital outputs. Each input can be used as a 32-bit counter, which suits pulse counting and event tracking on machines, building services and test equipment. Each output channel can switch a 300 mA load at 25 °C, so it can drive a power relay module directly.

The module communicates over Modbus TCP and Modbus UDP through a 10/100 Base-TX RJ-45 port. A built-in web server with Web HMI allows configuration and monitoring from a browser, and access is controlled by ID, password and IP filter. Dual programmable watchdogs cover the module and the communication link, and the digital outputs have programmable power-on and safe values for defined behaviour during start-up or fault conditions.

Electrical isolation is rated at 1500 VDC for the Ethernet side and 2500 VDC for the I/O side. The digital inputs and outputs are not isolated from each other channel to channel. The module is powered from a +10 ~ +30 VDC terminal block with reverse polarity protection, and it operates from -25 ~ +75 °C.

Applications

  • Building Automation
  • Factory Automation
  • Machine Automation
  • Remote Maintenance
  • Remote Diagnosis
  • Testing Equipment
Product type: Ethernet I/O Module
Interface: Ethernet
Protocol: Modbus TCP, Modbus UDP
Digital inputs: 8
Digital outputs: 8
Ports: 1
Isolation: 2500 VDC (I/O)
Power input: +10 ~ +30 VDC
Operating temperature: -25 ~ +75 °C
Mounting: DIN-rail

Specifications

Software
Built-in Web ServerYes
CPU Module
Watchdog TimerModule, Communication (Programmable)
Isolation
2-way IsolationEthernet: 1500 VDC
I/O: 2500 VDC
EMS Protection
EFT (IEC 61000-4-4)±4 kV for Power Line
ESD (IEC 61000-4-2)±4 kV Contact for Each Terminal
±8 kV Air for Random Point
LED Indicators
StatusRun, Ethernet
Digital Input/Counter
Channels8
TypeWet Contact
Sink/Source (NPN/PNP)Sink/Source
ON Voltage Level+10 ~ +50 VDC
OFF Voltage Level+4 VDC (max.)
Max. Counts4,294,967,295 (32-bit)
Frequency500 Hz
Min. Pulse Width1 ms
Input Impedance10 kΩ
Overvoltage Protection+70 VDC
Digital Output
Channels8
TypeIsolated Open Collector
Sink/Source (NPN/PNP)Sink
Load Voltage+10 ~ +40 VDC
Load Current300 mA/channel at 25°C
Direct Drive Power Relay Module
Overvoltage Protection+60 VDC
Overload Protection1.4 A
Short-circuit ProtectionYes
Power on ValueProgrammable
Safe ValueProgrammable
Ethernet
Ports1 x RJ-45, 10/100 Base-TX
Access ControlID, Password and IP Filter
ProtocolModbus TCP, Modbus UDP
Power
Reverse Polarity ProtectionYes
Consumption2.5 W (max.)
Powered from Terminal Block+10 ~ +30 VDC
Mechanical
Dimensions (mm)72 x 123 x 35 (W x L x H)
InstallationDIN-Rail mounting
Environment
Operating Temperature-25 ~ +75 °C
Storage Temperature-30 ~ +80 °C
Humidity10 ~ 90% RH, Non-condensing

Specifications as published by the manufacturer. Subject to change.

0 sur 0 évaluations

Note moyenne de 0 sur 5 étoiles

Laissez une évaluation !

Partagez avec d'autres clients votre avis sur le produit.