WLS-R01 Wireless Locating System Receiver and 2.4GHz to 400MHz Router
WLS-R01 CR receives 2.4GHz locating data from WLS-T01 units and relays it on 400MHz, extending the line-of-sight range to 500 m. Suited to DIN-rail installation in fixed positions.
- Converts 2.4GHz locating data to 400MHz to extend wireless transmission distance
- Line-of-sight range of 100 m on 2.4GHz and 500 m on 400MHz
- 16 RF channels per band with RSSI filtering function
- Built-in 2.4GHz 3dBi PCB directional antenna
- External DIP and rotary switches for configuration
- Selectable baud rates of 9600, 19200, 38400, 57600 and 115200 bps
177,00 € per piece
| 1–9 pcs | 177,00 € | |
|---|---|---|
| 10–30 pcs | 172,00 € | −3 % |
| 31+ pcs | 168,00 € | −5 % |
Toote teave "WLS-R01 Wireless Locating System Receiver and 2.4GHz to 400MHz Router"
The WLS-R01 CR is a 2.4GHz wireless receiver for fixed installation. It collects the locating data broadcast by WLS-T01 units and can also act as a converter, passing that data onward on the 400MHz band. The extra reach is achieved without adding wiring between communication points.
Both RF bands offer 16 channels. The 2.4GHz band is divided into 5MHz segments with a line-of-sight range of 100 m, while the 400MHz band provides up to 500 m line of sight. Four group IDs within each 400MHz channel help prevent neighbouring channels from interfering with one another, and RSSI filtering is included.
Configuration is carried out with external DIP and rotary switches. The unit mounts on DIN-rail and accepts +10 ~ +30 VDC with a maximum consumption of 1 W. Locating data can be polled by the WLS software on a PC through the transparent function of RFU-400. The ordering description identifies this as an Asia-only general type.
Applications
- Item tracking
- Personnel movements
- Factory regional management
| Product type: | Wireless locating receiver |
|---|---|
| Power input: | +10 ~ +30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Specifications
| EMS Protection | |
|---|---|
| EFT (IEC 61000-4-4) | ±4 kV for Power |
| ESD (IEC 61000-4-2) | ±4 kV Contact for Power Line, ±8 kV Air for Random |
| Surge (IEC 61000-4-5) | ±3 kV for Power |
| LED Indicators | |
| Status | 1 x Power 1 x 400MHz Transmitted status 1 x 2.4GHz Received status |
| RF | |
| Antenna | 2.4GHz:2.4GHz - 3dBi PCB directional antenna 400MHz: 429MHz – 0dBi Omni directional antenna |
| Channels | 16 |
| Frequency Band | 2.4GHz: 2.4GHz 400MHz: Channel 0~9- 429.8125 MHz to 429.9250 MHz; Channel A~F- 429.1750 MHz to 429.2375 MHz |
| Modulation | 2.4GHz:OQPSK (Offset Quadrature Phase-shift Keying) |
| Spread Spectrum | 2.4GHz:DSSS (Direct-Sequence Spread Spectrum) |
| Transmission Power | 2.4GHz:16±1dBm (Default) / 17dBm (Max.) 400MHz:19dBm (Default / Max.) |
| No. of Nodes | 2.4GHz:90 (Max., Tag Tx interval is 3 seconds) |
| Transmission Distance (LoS) | 2.4GHz:100m (Default) 400MHz:500m(Default) |
| Power | |
| Input Range | +10 ~ +30 VDC |
| Consumption | 1 W Max. |
| Mechanical | |
| Dimensions (mm) | 33 x 110 x83 (W x L x H) |
| Installation | DIN-Rail |
| Environment | |
| Operating Temperature | -25°C ~ +75°C |
| Storage Temperature | -30°C ~ +80°C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Logi sisse