DAQ Daughter Board

ADP-20 CR is a 20-pin to 20-pin connector extender for ISA cards. It relays the dual 20-pin flat cable connection away from the card, so the wiring can be routed to a more convenient position within a cabinet or test setup.The kit includes one CA-2002 flat cable, 20-pin, 20 cm long (one set of two cables). The board measures 114 mm x 102 mm and is rated for operation from 0 to +60 °C, with storage from -30 to +80 °C and a humidity range of 10% to 90%, non-condensing.The board is listed under DAQ daughter boards. The manufacturer also lists the ADP-20/PCI as a similar item for comparison. The ADP-20 CR is RoHS and WEEE certified.ApplicationsExtending 20-pin flat cable connections on ISA cards

ADP-20/PCI CR is a 20-pin to 20-pin connector extender for PCI card wiring. It carries a dual 20-pin flat cable connection over a longer run, so the card can be reached from a more convenient location.The kit includes one CA-2002 flat cable set, 20-pin, 20 cm long, supplied as two cables. This lets you start wiring straight away without sourcing a matching cable separately.The extender is RoHS compliant. It belongs to the DAQ daughter board accessory range, so it suits engineers building or servicing data acquisition setups that use PCI cards.

The ADP-37 CR is a connector extender that brings a 50-pin Opto-22 header out to a female DB-37 connector, giving engineers a practical way to wire Opto-22 signals to an ISA data acquisition card.The kit includes a 20 cm, 50-pin CA-5002 flat cable, so the board can be connected straight away. Its compact 114 mm x 102 mm footprint suits tight enclosures and benchtop setups.Compliant with RoHS and WEEE, the ADP-37 CR is rated for an operating temperature of 0~ +60 °C and storage of -30 ~ +80 °C, with 10% ~ 90% humidity, non-condensing.ApplicationsWiring Opto-22 signals to a DB-37 connector on an ISA card

The ADP-37/PCI CR is a connector adapter that brings a 50-pin Opto-22 interface out to a female DB-37 connector, making it easier to wire field signals to a PCI data acquisition card. It is supplied with a CA-5002 flat cable, 50-pin, 20 cm long, so it can be connected straight away.The board measures 114 mm x 102 mm and is rated for an operating temperature of 0 ~ +60 °C, with a storage range of -30 ~ +80 °C. Relative humidity of 10% ~ 90% is permitted, non-condensing. The product is RoHS and WEEE listed.Choose this variant when your system uses a PCI card and you need a 50-pin Opto-22 to DB-37 breakout. For the ISA card version, check the separate ADP-37 CR listing.ApplicationsWiring 50-pin Opto-22 signals to DB-37 connectors on PCI data acquisition systems

The ADP-50 extends a single 50-pin flat cable connection on an ISA card, letting you position the connector away from the card's original location. It is a passive adapter with no electronics of its own, so it adds no configuration or software requirements.Supplied with the CA-5002 cable: the order includes a 50-pin flat cable, 20 cm long, so the extender can be used straight out of the box in a typical DAQ setup.The board measures 114 mm x 102 mm and is specified for an operating temperature of 0~ +60 °C, with storage between -30 ~ +80 °C and humidity of 10% ~ 90%, no condensing. It is RoHS and WEEE certified. For a PCI-based variant, see the ADP-50/PCI.ApplicationsExtending a 50-pin flat cable connection on ISA data acquisition cardsPositioning I/O connectors away from the ISA card inside an enclosure or cabinet

ADP-50/PCI CR is a 50-pin to 50-pin connector extender for PCI card installations, used to extend a 50-pin flat cable run where the existing reach is insufficient or the connection point needs to move.The kit includes a CA-5002 flat cable (50-pin, 20 cm), so it can be fitted straight away. The extender is compact at 114 mm x 102 mm and is RoHS and WEEE certified.Operating range is 0 ~ +60 °C, with storage between -30 ~ +80 °C and humidity of 10% ~ 90%, non-condensing. Check the environmental limits against your cabinet conditions before installation.ApplicationsExtending 50-pin flat cable connections on PCI card installations

DB-12SSR is a daughter board that provides twelve AC solid-state relay outputs, each optically isolated from the control side. It plugs directly into an OPTO-22 compatible board, so engineers can add switched AC loads to an existing data acquisition setup without building a separate interface.Each channel shows its relay status on an LED, which helps with commissioning and fault finding. Field wiring is made on screw terminals. The board is supplied with the CA-5015 flat cable (50-pin, 1.5 m) for the connection to the host board.Relay operate time is specified at 1/2 cycle of the voltage sine wave, 1 ms maximum, and the solid-state design has no contact arcing or bounce. The board draws 400 mA at 5 V and is rated for an operating temperature of 0 ~ 60°C.ApplicationsOn/off controlEnergy managementTest automationProcess control

The DB-12SSR/D is a 12-channel AC solid-state relay daughter board for switching mains-level loads from a DAQ system. Each channel is a Form A SSR, and the board plugs directly into an OPTO-22 compatible board, so it can be added to an existing acquisition setup without custom wiring.Field wiring terminates on screw terminals, and an LED on each channel shows the relay state, which helps with commissioning and fault finding. Per the ordering information, this variant ships with a CA-3710 DB37 male-to-male cable (45º, 1 m) instead of the CA-5015 flat cable supplied with the base DB-12SSR.Typical uses include on/off switching, energy management, test automation and process control. The board operates from 0 to 60 °C and is stored between -20 and 70 °C, with humidity rated at 5 % to 90 % non-condensing.ApplicationsOn/off controlEnergy managementTest automationProcess control

The DB-12SSR/D/DIN provides 12 optically isolated AC solid-state relay channels on a board designed for DIN-rail mounting. It connects directly to an OPTO-22 compatible board, so engineers can switch AC loads from an existing digital I/O setup without building custom relay stages.Each channel has an LED that shows relay status, and field wiring is made through screw terminals. Each channel is rated at 4 A @ 240 VAC, with an operate time of 1/2 cycle of the voltage sine wave, 1 ms maximum. The board draws 400 mA @ 5 V and measures 223.5 mm x 135.5 mm.This variant is supplied with the CA-3710 cable (DB37 male to male, 45º, 1 M). It suits on/off control, energy management, test automation and process control applications. The operating range is 0 ~ 60°C, with storage from -20 ~ 70°C and 5% to 90% humidity, non-condensing.ApplicationsOn/off controlEnergy managementTest automationProcess control

DB-12SSR/DIN is a 12-channel AC solid-state relay board that plugs directly into an OPTO-22 compatible board, giving engineers a compact way to switch AC loads from a data acquisition system. Each channel is optically isolated, and LEDs show the relay state at a glance.This DIN-rail variant suits panel and cabinet installations where the board needs to be fitted on a rail. Field wiring is made to screw terminals, and the CA-5015 flat cable (50-pin, 1.5 m) is included to make the connection to the host board.Each channel is rated at 4 A at 240 V AC (4 A at 250 V AC per the feature list), with an operate time of 1/2 cycle of the voltage sine wave, 1 ms maximum. The board draws 400 mA at 5 V and operates from 0 to 60 °C.ApplicationsOn/off controlEnergy managementTest automationProcess control

The DB-16P CR is a 16-channel isolated digital input daughter board for the A-82X board, any 812pg, 711, 726 or 720 series board, and PCI-Bus multi-function boards. Each channel uses a bi-directional opto-coupler with a resistor for current sensing, so the board works with both DC and AC inputs.Use it to sense DC signals from TTL levels up to 24 V or a wide range of AC signals. Optical isolation protects the host computer from large common-mode voltages, ground loops and voltage spikes that are common in industrial environments.ON level: 2.8 VDC~24VDC (max), or 4 VAC~24VAC (max) at 1KHzOFF level: 1 VDC (max), or 1 VAC (max) at 1KHzResponse speed: 20us without filter / 2.2ms with filterPower consumption: 12V /0.53A ; 5V / 0.2AApplicationsIsolated digital input sensingEnergy managementTest automationProcess control

The DB-16P16R CR is a daughter board that adds 16 isolated digital inputs and 16 Form A relay outputs to a compatible 37-pin digital I/O interface. It is designed to work with the PISO-P32C32 and ISO-P32C32 boards and with OPTO-22 compatible digital I/O boards such as DIO24, DIO48, DIO144, PIO-D144U, PIO-D96U and PIO-D48U.Each relay channel has an LED that lights when the relay is activated, which makes it easy to check switching state during commissioning and fault finding. Field wiring is made through screw terminals, and the board mounts on a DIN rail.This ordering code includes the CA-3710D cable, a 1 m DB37 male-to-male connector with a 180° configuration, for connecting the board to the host I/O card.16 isolated digital input channels16 Form A relay outputs, rated 250 VAC/30 VDC at 3 A or 5 AAccepts 37-pin connector for control of relays and inputsLED indication for each activated relayScrew terminals for field wiringSupply input +12 ~ 30 VDC, 0.20 A @ +24 V max.Operating temperature -25 ~ +75 °CApplicationsExpanding OPTO-22 compatible digital I/O systems with isolated inputs and relay outputsRelay switching controlled from PISO-P32C32 or ISO-P32C32 boardsPanel-mounted digital I/O in industrial control cabinets

The DB-16P16R/DIN is a daughter board that adds 16 isolated digital inputs and 16 Form A relay outputs to compatible OPTO-22 style digital I/O boards. It is designed for use with the PISO-P32C32 and ISO-P32C32, and the source lists DIO24, DIO48, DIO144, PIO-D144U, PIO-D96U and PIO-D48U as compatible host boards.Relay outputs are driven through a 37-pin connector, and each active relay is indicated by its own LED, which simplifies commissioning and fault finding. Field wiring is made on screw terminals, and the board mounts on a DIN rail.The relays are rated at 250 VAC/30 VDC, 3 A for 100,000 operations minimum, or 250 VAC/30 VDC, 5 A for 6,000 operations minimum. The board runs from +12 ~ 30 VDC and operates between -25 ~ +75 °C.ApplicationsSwitching relay loads from a compatible digital I/O boardReading isolated digital input signals into a DAQ or control system based on PISO-P32C32, ISO-P32C32 or OPTO-22 style I/O boardsExpanding existing DIO24, DIO48, DIO144, PIO-D144U, PIO-D96U or PIO-D48U installations with additional input and relay channels

The DB-16P8R CR is a DAQ daughter board that adds 16 optically isolated digital inputs and 8 relay outputs to compatible OPTO-22 style digital I/O cards. It is intended for engineers who need isolated sensing of dry or wet contacts alongside switched relay control in test and automation set-ups.The board connects directly to the DIO24, DIO48, DIO144, PIO-D144U, PIO-D96U and PIO-D48U digital I/O boards. Each input can be configured for dry or wet contact operation using a jumper. The relay outputs are 8 x Form C with a contact rating of 250 VAC/5A and 30 VDC/5A.This CR ordering code includes the CA-5015 flat cable (50-pin, 1.5 M), so the board can be connected to the host card straight away. The unit is RoHS and WEEE certified and is rated for an operating temperature of 0 ~ 60°C.ApplicationsIsolated digital input sensingTesting and automation

DB-16P8R/D is a daughter board that adds 16 optically isolated digital input channels and 8 Form C relay outputs to compatible OPTO-22 digital I/O cards. It suits engineers who need isolated sensing and switching alongside an existing DIO24, DIO48, DIO144, PIO-D144U, PIO-D96U or PIO-D48U setup.Each input can be configured for dry or wet contact using a jumper. The high range accepts 5 to 24 Vdc and the low range accepts 0 to 1.8 Vdc, with an input response speed of 20us. The relay outputs are rated 250 VAC/5A and 30 VDC/5A, with operate and release times of 10 ms and 5 ms.This ordering code includes the CA-3710 37-pin D-sub cable, 1 m. The board operates from 0 to 60 °C and is RoHS and WEEE certified.ApplicationsIsolated digital input sensingTest automation

The DB-16P8R/D/DIN CR is a DIN-rail mounted daughter board that extends compatible OPTO-22 style digital I/O cards with 16 optically isolated digital inputs and 8 Form C relay outputs. It connects directly to the DIO24, DIO48, DIO144, PIO-D144U, PIO-D96U and PIO-D48U range, so engineers can add isolated sensing and switching without custom wiring.Each input can be set by jumper to dry or wet contact operation. In wet contact mode the input range is high 5~24Vdc and low 0~1.8Vdc, with a response speed of 20us. The relay outputs are rated 250 VAC/5A and 30 VDC/5A, with an operate time of 10 ms and a release time of 5 ms.This variant ships with a CA-3710 cable (DB37 male to male, 45º, 1 M). The board is rated for an operating temperature of 0 ~ 60°C and a storage temperature of -20 ~ 70°C.ApplicationsIsolated digital input sensingTesting automation

The DB-16P8R/DIN CR is a DAQ daughter board that adds 16 optically isolated digital inputs and 8 relay outputs to compatible OPTO-22 style digital I/O boards. It suits engineers who need field contacts electrically separated from the host board, or who need to switch loads through Form C relays.Each input can be set by jumper for dry or wet contact operation. The relays are rated 250 VAC/5A and 30 VDC/5A, with an operate time of 10 ms and a release time of 5 ms. The DIN-rail version is supplied for mounting on a standard DIN rail.A 1.5 m, 50-pin flat cable (CA-5015) is included. The board is specified for an operating temperature of 0 ~ 60°C.ApplicationsIsolated digital input sensingTesting automation

The DB-16R is a 16-channel relay output daughter board that lets a digital output port switch 16 Form C relays. Each relay is energised by applying a 5 V signal to its channel on the 20-pin flat cable connector, so the board can be controlled directly from an A-82X, a DIO-64 or any other compatible digital output port.Each relay has an indicator LED that lights while the relay is active, which makes channel status easy to check during commissioning and fault finding. Field wiring is made through screw terminals, and a separate screw-terminal power input is provided so the board does not draw its supply from the host PC.Relay contact rating: 0.5 A at 120 VAC or 1 A at 24 VDCOperate time 6 ms, release time 3 msIncludes CA-2010 flat cable, 20-pin, 1 mApplicationsOn/off controlEnergy managementTest automationProcess control

DB-1825 CR is a female DB37 to screw terminal board that gives engineers a practical way to wire field signals to PCI-1202U, PCI-1602U and PCI-1802U data acquisition cards. Connection is made through a single 37-pin cable, with 32 single-ended channels and 16 differential channels available on the terminals.The ordering code includes a CA-3710 cable (DB37 male to male, 45º, 1 m), so the board can be connected to the DAQ card straight out of the box. The board also provides blank pads for break detection, a low-pass filter, a current shunt and a voltage divider, which are fitted by manual soldering when needed.The board measures 170 mm x 114 mm and is rated for an operating temperature of 0~ +60 °C, a storage temperature of -30 ~ +80 °C and a humidity range of 10% ~ 90%, non-condensing.ApplicationsWiring field signals to PCI-1202U, PCI-1602U and PCI-1802U data acquisition cardsAdding user-fitted signal conditioning such as filtering, current shunting or voltage division on the board

The DB-1825/2 CR breaks out the 37-pin cable I/O port of PCI-1202U, PCI-1602U and PCI-1802U data acquisition cards onto a screw terminal board, so field wiring can be terminated without working directly at the card. It is supplied with a 2 m DB37 male-to-male cable (CA-3720) for the connection to the card.The board provides 32 single-ended or 16 differential channels, as stated for this series. Blank pads allow the user to add break detection, a low-pass filter, a current shunt and a voltage divider by manual soldering, which suits engineers who need to adapt the signal conditioning to their own circuit.The board measures 170 mm x 114 mm and is rated for an operating range of 0 to +60 °C with 10% to 90% humidity, non-condensing. It carries CE, UKCA, FCC, RoHS and WEEE marks.ApplicationsField wiring termination for PCI-1202U, PCI-1602U and PCI-1802U data acquisition cards

DB-1825/2/DIN connects a 37-pin DB37 cable from a PCI-1202U, 1602U, 1802U, 822 or 826 data acquisition card to a screw terminal board, giving engineers a practical way to wire field signals without building their own breakout. It provides 32 single-ended or 16 differential channels.This DIN-rail variant suits panel and cabinet installations. The board is supplied with a CA-3720 DB37 male-to-male cable, 45º, 2 m long, so it can be connected to the DAQ card straight away.Blank pads on the board allow break detection, a low-pass filter, a current shunt and a voltage divider to be added by manual soldering where the application requires them. The board is CE, UKCA, FCC, RoHS and WEEE certified, and is rated for 0 to +60 °C operation.ApplicationsWiring field signals to PCI-1202U, 1602U, 1802U, 822 and 826 data acquisition cardsCabinet-mounted DAQ wiring on DIN rail

The DB-1825/DIN CR breaks out the 37-pin cable I/O of the PCI-1202U, PCI-1602U and PCI-1802U data acquisition cards onto screw terminals, so field wiring can be made without working directly on the card connector. It supports 32 single-ended or 16 differential channels, and it is supplied with DIN-rail mounting.The board also provides blank pads for manual soldering of break detection, a low-pass filter, a current shunt and a voltage divider, letting you tailor the signal conditioning to your input requirements. A CA-3710 cable (DB37 male to male, 45º, 1 m) is included to connect the board to the DAQ card.The board is rated for an operating temperature of 0 ~ +60 °C and a storage temperature of -30 ~ +80 °C, at 10% ~ 90% humidity with no condensing. It carries CE, UKCA, FCC, RoHS and WEEE certification.ApplicationsAnalog signal wiring for PCI-1202U, PCI-1602U and PCI-1802U data acquisition cards

The DB-24C CR adds 24 NPN open-collector digital outputs to a data acquisition setup. The outputs are split into four separately isolated groups, which helps keep field wiring apart from the host side and suits switching duties such as on/off control and process control.Current ratings differ by channel group: 16 channels are rated 100 mA and 8 channels 600 mA, both at 30 Vdc. Each output has an LED status indicator, and the screw terminals simplify field wiring. The board connects directly to OPTO-22 compatible boards through its OPTO-22 connector, with a 37-pin D-sub and a 20-pin connector also fitted.This CR ordering code includes a CA-5015 flat cable (50-pin, 1.5 m). Typical use cases include energy management and test automation. The module is RoHS and WEEE certified.ApplicationsOn/off controlEnergy managementTest automationProcess control

The DB-24C/D CR provides 24 optically isolated digital outputs, arranged in four isolated banks, for switching loads from an OPTO-22 compatible board or other DAQ setup.Each channel uses an NPN open-collector output. Sixteen channels are rated at 100 mA and eight at 600 mA, both at 30 VDC. Isolation is 3750 Vrms, and typical response speed is 1 kHz. Output status is shown by LEDs, and field wiring is made through screw terminals.The board connects directly to OPTO-22 compatible boards and has an OPTO-22 compatible connector, a 37-pin D-sub connector and a 20-pin connector. This /D variant ships with the CA-3710 DB37 male-to-male cable (45°, 1 m), whereas the DB-24C CR is supplied with the CA-5015 50-pin flat cable (1.5 m). The board has an operating range of 0 ~ 60 °C.ApplicationsOn/off controlEnergy managementTest automationProcess control