PPDS-755-MTCP PoE Serial-to-Ethernet Device Server, 1x RS-232 and 4x RS-485
Programmable device server with 1x RS-232 and 4x RS-485 ports, PoE power and a Modbus TCP to RTU/ASCII gateway for bringing serial devices onto Ethernet networks.
- Five serial ports (1x RS-232 and 4x RS-485) bridged to a 10/100 Base-TX Ethernet port
- Virtual COM driver extends PC COM ports across the network
- Modbus TCP to RTU/ASCII gateway for SCADA and HMI integration
- Programmable device server with MiniOS7 and Xserver programming structure
- IEEE 802.3af PoE (Class 1) or +12 ~ 48 VDC terminal block power
- Watchdog timer and +/-4 kV ESD protection on the serial port
358,00 € per piece
| 1-9 pcs | 358,00 € | |
|---|---|---|
| 10-30 pcs | 347,00 € | −3 % |
| 31+ pcs | 340,00 € | −5 % |
Toote teave "PPDS-755-MTCP PoE Serial-to-Ethernet Device Server, 1x RS-232 and 4x RS-485"
The PPDS-755-MTCP links up to five serial devices, one RS-232 and four RS-485, to an Ethernet network. Its built-in Virtual COM driver lets software on a Windows PC use the device's serial ports as standard COM ports, so existing serial applications can be extended across the network without rewriting them.
The unit runs the MiniOS7 operating system and includes a programmable Xserver structure for building custom Ethernet applications. It can also act as a Modbus TCP to RTU/ASCII gateway, allowing Modbus TCP SCADA or HMI systems to communicate with Modbus RTU or ASCII slave devices on the serial side. Power can be supplied over a standard Category 5 cable via IEEE 802.3af PoE (Class 1) or from a +12 ~ 48 VDC terminal block.
This plastic-cased version suits DIN-rail or wall installation. Its removable terminal block simplifies wiring in industrial cabinets. The package includes a CA-0910 cable.
Applications
- Factory automation
- Building automation
- Home automation
| Product type: | Serial-to-Ethernet device server |
|---|---|
| Interface: | RS-232/RS-485 |
| Protocol: | Modbus TCP |
| Ports: | 5 |
| PoE: | IEEE 802.3af, Class 1 |
| Power input: | +12 ~ 48 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail, Wall |
| Housing: | Plastic |
Specifications
| CPU Module | |
|---|---|
| CPU | 80186-80 MHz or compatible |
| EEPROM | 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles. |
| Flash | 512 KB ; Erase unit is one sector (64 KB) ; 100,000 erase/write cycles |
| SRAM | 512 KB |
| Watchdog Timer | Yes |
| LED Indicators | |
| Status | 1 x Power/PoE |
| Ethernet | |
| Ports | 10/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator) |
| COM Ports | |
| Ports | 1 x 5-wire RS-232 4 x RS-485 |
| Baud Rate | 115200 bps Max. |
| Bias Resistor | Yes, 1 KΩ |
| Parity | None, Even, Odd, Mark, Space None parity is required when using 8 data bits and 2 stop bits on COM1/COM2. |
| Data Bit | 7, 8: for COM1 and COM2 5, 6, 7, 8: for COM3 ~ COM5 |
| Stop Bit | 1, 2: for COM1 ~ COM5 |
| Node Address | 254 (max.) |
| Power | |
| Consumption | 2.2 W |
| Powered from PoE | IEEE 802.3af, Class 1 |
| Powered from Terminal Block | +12 ~ 48 VDC |
| Mechanical | |
| Casing | Plastic |
| Dimensions (mm) | 72 mm x 35 mm x 123 mm (W x L x H) |
| Installation | DIN-Rail or Wall mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -40 ~ +80 °C |
| Humidity | 5 ~ 90% RH, non-condensing |
Specifications as published by the manufacturer. Subject to change.
Logi sisse