PIO-DA4U Universal PCI Analog Output Board, 4-ch 14-bit
4-channel, 14-bit PCI analog output board with ±10 V and 0~20 mA ranges, plus 16 channels each of 5 V/TTL digital input and output. Includes CA-4002 D-Sub connector.
- Four 14-bit analog output channels, selectable per channel for ±10 V voltage or 0 ~ 20 mA current output
- Software calibration with calibration data saved in EEPROM, so no jumpers or trim-pots are needed
- 16-channel 5 V/TTL digital input with pull-high and pull-low function
- 16-channel 5 V/TTL digital output
- Three 16-bit timer/counter channels with 4 MHz internal reference clock
- Two timer-triggered interrupt sources and double-buffered DA latch
349,00 € per piece
| 1–9 pcs | 349,00 € | |
|---|---|---|
| 10–30 pcs | 339,00 € | −3 % |
| 31+ pcs | 332,00 € | −5 % |
Toote teave "PIO-DA4U Universal PCI Analog Output Board, 4-ch 14-bit"
The PIO-DA4U CR is a universal PCI board for engineers who need four 14-bit analog outputs in a host PC. Each channel can be set individually to voltage output (±10 V) or current output (0 ~ 20 mA), which suits mixed-signal control and test set-ups where signal types vary between channels.
Calibration is handled in software rather than with jumpers or trim-pots, and the calibration data can be stored in EEPROM. The board also provides 16 channels of 5 V/TTL digital input with pull-high and pull-low options, 16 channels of 5 V/TTL digital output, and three 16-bit timer/counter channels referenced to an internal 4 MHz clock.
The board fits a universal PCI slot (3.3 V or 5 V signalling) and includes one CA-4002 D-Sub connector. A 4-bit Card ID switch lets software identify individual boards when two or more are installed in the same computer (version 1.1 or above).
Applications
- High-speed data acquisition systems
- Process monitoring and control
- Vibration analysis
- Digital pattern generation from the digital I/O port
| Product type: | PCI DAQ board |
|---|---|
| Interface: | PCI |
| Digital inputs: | 16 |
| Digital outputs: | 16 |
| Analog outputs: | 4 |
| Power input: | +5 V, 600 mA |
| Operating temperature: | 0 ~ +60 °C |
Specifications
| Hardware | |
|---|---|
| Connector | Female DB37 x 1 20-pin Box header x 2 |
| Card ID | Yes(4-bit) for Version 1.1 or above |
| Analog Output | |
| Channels | PIO-DA4U : 4 PIO-DA8U : 8 PIO-DA16U : 16 |
| Range | Voltage: ±10 V Current: 0 ~ 20 mA |
| Resolution | 14-bit |
| Accuracy | 0.04% of FSR ±2 LSB @ 25 °C, ± 10 V |
| Response Time | 333 kHz (Typical) |
| Voltage Output Capability | ±5 mA |
| Slew Rate | 0.71 V/μs |
| Operation Mode | Static Update |
| Digital Input | |
| Channels | 16 |
| Type | 5 V/TTL |
| ON Voltage Level | 2.0 V Min. |
| OFF Voltage Level | 0.8 V Max. |
| Response Speed | 1.0 MHz (Typical) |
| Trigger Mode | Static Update |
| Digital Output | |
| Channels | 16 |
| Type | 5 V/TTL |
| Operation Mode | Static Update |
| Load Voltage | Logic 0: 0.4 V Max. Logic 1: 2.4 V Min. |
| Load Current | Sink: 2.4 mA @ 0.8 V Source: 0.8 mA @ 2.0 V |
| Response Speed | 1.0 MHz (Typical) |
| Timer/Counter/Frequency | |
| Channels | 3 |
| Type | 5 V/TTL |
| Resolution | 16-bit |
| Reference Clock | Internal: 4 MHz |
| PC Bus | |
| Type | 3.3 V/5 V Universal PCI, 32-bit, 33 MHz |
| Data Bus | 8-bit |
| Power | |
| Consumption | PIO-DA4U : 600 mA@ +5 V PIO-DA8U : 800 mA@ +5 V PIO-DA16U : 1400 maA @ +5 V |
| Mechanical | |
| Dimensions (mm) | 105.1 x 188 x 22 (W x L x D) |
| Environment | |
| Operating Temperature | 0 ~ +60°C |
| Storage Temperature | -20 ~ +70°C |
| Humidity | 5 ~ 85% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Logi sisse