PEX-1002L PCI Express Multi-function DAQ Board, 32-ch 12-bit AI, 110 kS/s
PCI Express x1 multi-function DAQ board with 32 single-ended or 16 differential 12-bit analogue inputs at up to 110 kS/s, plus 16 DI and 16 DO 5 V/TTL channels.
- PCI Express x1 interface with an on-board Card ID SMD switch for identifying boards in multi-card systems
- 32 single-ended or 16 differential 12-bit analogue input channels, up to 110 kS/s
- Gain of 1, 2, 4, 8 with bipolar ranges of ±10 V, ±5 V, ±2.5 V and ±1.25 V
- 16 channels of 5 V/TTL digital input and 16 channels of 5 V/TTL digital output
- Pull-high/pull-low jumpers for DI channels to define the state of unconnected inputs
- Software, internal programmable pacer and external (5 V/TTL) trigger modes
354,00 € per piece
| 1–9 pcs | 354,00 € | |
|---|---|---|
| 10–30 pcs | 344,00 € | −3 % |
| 31+ pcs | 337,00 € | −5 % |
Toote teave "PEX-1002L PCI Express Multi-function DAQ Board, 32-ch 12-bit AI, 110 kS/s"
PEX-1002L CR is a PCI Express x1 multi-function data acquisition board for engineers who need analogue input, digital input and digital output on a single card. The analogue front end offers 32 single-ended or 16 differential channels at 12-bit resolution, sampling at up to 110 kS/s, with gain settings of 1, 2, 4 and 8.
Each board carries a 4-bit Card ID switch, so individual cards can be told apart in software when two or more are installed in the same computer. Pull-high and pull-low jumpers set a defined state for the digital input channels when they are left unconnected, rather than leaving them floating. Triggering can be software, internal programmable pacer or external 5 V/TTL.
The CR ordering option includes one CA-4002 D-Sub connector. Driver support covers Linux, DOS and Windows, with a DLL, ActiveX control and sample programs for several development environments, including LabVIEW, C#.NET and Visual Basic.NET.
Applications
- Laboratory automation
- Production test
- Sensor interface
| Product type: | DAQ board |
|---|---|
| Interface: | PCI Express x1 |
| Digital inputs: | 16 |
| Digital outputs: | 16 |
| Analog inputs: | 32 single-ended/16 differential |
| Operating temperature: | 0 ~ +60 °C |
Specifications
| Hardware | |
|---|---|
| Connector | Female DB37 x 1 20-pin box header x 2 |
| Card ID | Yes (4-bit) |
| Analog Input | |
| Channels | 32 single-ended/16 differential |
| Range | Gain: 1, 2, 4, 8 Bipolar Range: ±10 V, ±5 V, ±2.5 V, ±1.25 V |
| Resolution | 12-bit |
| Accuracy | 0.01% of FSR ±1 LSB @ 25 °C, ±10 V |
| Sampling Rate | 110 kS/s. Max. |
| Input Impedance | 10 MΩ/6 Pf |
| Overvoltage Protection | Continuous ±35 Vp-p |
| Zero Drift | ±4 ppm/°C of FSR |
| Trigger Mode | Software, Internal programmable pacer, External (5 V/TTL) |
| Data Transfer | Polling, Interrupt |
| Digital Input | |
| Channels | 16 |
| Type | 5 V/TTL |
| ON Voltage Level | 2.0 V Min. |
| OFF Voltage Level | 0.8 V Max. |
| Response Speed | 500 KHz |
| Trigger Mode | Static Update |
| Digital Output | |
| Channels | 16 |
| Type | 5 V/TTL |
| Operation Mode | Static Update |
| Load Voltage | Logic 0: 0.4 V Max. Logic 1: 2.4 V Min. |
| Load Current | Sink: 2.4 mA Source: 0.8 mA |
| Response Speed | 500 KHz (Typical) |
| Timer/Counter/Frequency | |
| Channels | 3 (Independent x 1/Internal pacer x 1/External pacer x 1) |
| Type | 5 V/TTL |
| Resolution | 16-bit |
| Input Frequency | 10 MHz Max. |
| Reference Clock | Internal: 4 MHz |
| PC Bus | |
| Type | PCI Express x 1 |
| Data Bus | 16-bit |
| Power | |
| Consumption | 900 mA @ +3.3 V 350 mA @ +12 V |
| Mechanical | |
| Dimensions (mm) | 110 x 167 x 22 (W x L x D) |
| Environment | |
| Operating Temperature | 0 ~ +60°C |
| Storage Temperature | -20 ~ +70°C |
| Humidity | 5 ~ 85% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Logi sisse