I-87123-G 1-Port Intelligent CANopen Master Module (Serial Bus Type)
1-port intelligent CANopen master module for CiA 301 v4.02 networks, with dynamic PDO mapping, SYNC modes, node scanning and a built-in 120Ω terminator.
- Standard CANopen master conforming to DS-301 v4.02 / CiA 301 v4.02
- Scan function to detect all nodes on the same CANopen network
- Master listen mode and event triggers for EMCY, Node Guarding and Heartbeat
- Event-triggered, remote-requested, cyclic and acyclic SYNC of PDO modes
- Dynamic PDO mapping and segmented SDO communication
- Baud rate 10 k ~ 1 M with built-in 120Ω terminator
244,00 € per piece
| 1–9 pcs | 244,00 € | |
|---|---|---|
| 10–30 pcs | 236,00 € | −3 % |
| 31+ pcs | 231,00 € | −5 % |
Toote teave "I-87123-G 1-Port Intelligent CANopen Master Module (Serial Bus Type)"
I-87123-G is a single-port CANopen master module for engineers who need a dedicated master controller on a CAN bus network. It follows the DS-301 v4.02 specification and handles network management, scanning of all nodes on the network, and monitoring of EMCY, Node Guarding and Heartbeat events.
For process data, the module offers event-triggered, remote-requested, cyclic and acyclic SYNC of PDO modes, along with dynamic PDO mapping. SDO communication supports the segment protocol, and the module can also run in master listen mode. The baud rate range is 10 k ~ 1 M, and a 120Ω terminating resistor is built in.
The module is isolated, with 3000 VDC for DC-to-DC and 2500 Vrms for the photo-coupled channels. It is rated for an operating temperature of -25 ~ +75 °C and includes PWR, RUN and ERR status LEDs. Driver support is listed for WinPAC, ViewPAC, XPAC and XPAC-CE6, and the SDK covers eVC++4.0, VC++, VB.net and C#.net.
Applications
- Industrial Machinery
- Laboratory Equipment & Research
- Restaurant Appliances
- Maritime
- Medical
- Specialty Vehicles
| Product type: | CANopen master module |
|---|---|
| Interface: | CAN bus |
| Protocol: | CANopen |
| Ports: | 1 |
| Isolation: | 3000 VDC / 2500 Vrms |
| Operating temperature: | -25 ~ +75 °C |
Specifications
| Software | |
|---|---|
| Driver | WinPAC, ViewPAC XPAC, XPAC-CE6 (ISaGRAF not supported) |
| SDK | eVC++4.0, VC++, VB.net, C#.net |
| CPU Module | |
| CPU | 80186, 80 MHz or compatible |
| EEPROM | 2 KB |
| Flash | 512 KB |
| SRAM | 512 KB |
| Watchdog Timer | Hardware watchdog |
| LED Indicators | |
| Status | PWR LED, RUN LED, ERR LED |
| CANopen | |
| Controller | NXP SJA1000T with 16 MHz clock |
| Ports | 1 |
| Baud Rate | 10 k ~ 1 M |
| Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
| Terminal Resistor | Built-in 120Ω |
| Protocol | CiA 301 v4.02 |
| NMT | Master |
| Power | |
| Consumption | 2 W |
| Mechanical | |
| Dimensions (mm) | 31 x 115 x 91 (W x L x H) |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Logi sisse