I-8124W-G DeviceNet Master Module, 1-Port Parallel Bus for WinPAC/ViewPAC
One-port DeviceNet master module for WinPAC, ViewPAC and XPAC-CE6 controllers, with a parallel bus interface, 125k, 250k and 500k baud, and support for up to 64 nodes.
- Programmable master MAC ID with support for up to 64 nodes
- Group 2 and UCMM functions for slave communication
- Maximum fragment number up to 64 for input/output data
- I/O operation modes: Poll, Bit-Strobe and Change Of State/Cyclic
- Auto-scan of slave devices
- On-line addition and removal of devices without stopping the network
302,00 € per piece
| 1–9 pcs | 302,00 € | |
|---|---|---|
| 10–30 pcs | 293,00 € | −3 % |
| 31+ pcs | 287,00 € | −5 % |
Toote teave "I-8124W-G DeviceNet Master Module, 1-Port Parallel Bus for WinPAC/ViewPAC"
The I-8124W-G adds a DeviceNet master port to WinPAC, ViewPAC and XPAC-CE6 controllers over the parallel bus. It runs a CAN controller with an isolated DeviceNet port, so an engineer can run a DeviceNet network from a PAC without a separate fieldbus gateway.
The master supports up to 64 nodes, with a programmable master MAC ID and Group 2 and UCMM functions. Poll, Bit-Strobe and Change Of State/Cyclic I/O operation modes are available, and the module can auto-scan slave devices, add or remove devices while the network is online, and reconnect automatically after a broken connection.
Suited to valve and sensor integration and to drive communication, the module is supplied as ordering code I-8124W-G CR. Key specifications include a 125k, 250k or 500k baud rate, a switchable 120 Ω terminal resistor, 3000 VDC DC-to-DC isolation and an operating range of -25 ~ +75 ℃.
Applications
- CVD DeviceNet applications
- Communication with PowerFlex400 drives
- SMC valve applications
- IFC-125 valve applications
- MKS FRCA valve applications
- SICK distance sensor applications
- Industrial automation, building automation, vehicle, marine and embedded control networks
| Product type: | DeviceNet master module |
|---|---|
| Interface: | Parallel bus |
| Protocol: | DeviceNet |
| Ports: | 1 |
| Isolation: | 3000 VDC (DC-to-DC), 2500 Vrms (photo-couple) |
| Operating temperature: | -25 ~ +75 °C |
Specifications
| Software | |
|---|---|
| Driver | WinPAC, ViewPAC, XPAC-CE6 (The XPAC series PAC only support one I-8124W) |
| SDK | For CE5: VB.Net, C#.Net, VC 2005 (with .Net Framework 2.0 or upper), and eVC++ 4.0 For CE6: VB.Net, C#.Net, VC 2008 (with .Net Framework 3.5 or upper) |
| CPU Module | |
| CPU | x86 |
| Watchdog Timer | CPU built-in |
| LED Indicators | |
| Status | NS LED, RUN LED, MS LED |
| DeviceNet | |
| Controller | NXP SJA1000T with 16 MHz clock |
| Ports | 1 |
| Baud Rate | 125 k, 250 k, 500 k |
| Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
| Terminal Resistor | Switch for 120 Ω terminal resistor |
| Protocol | DeviceNet Volumn I ver2.0, Volumn II ver2.0 |
| CAN Specification | ISO-11898-2, CAN 2.0A and CAN 2.0B |
| Power | |
| Consumption | 2 W |
| Mechanical | |
| Dimensions (mm) | 31 x 115 x 91 (W x L x H) |
| Environment | |
| Operating Temperature | -25 ~ +75 ℃ |
| Storage Temperature | -30 ~ +80 ℃ |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Logi sisse