ETS-7267 Ethernet I/O Module, 8-ch Power Relay with 2-Port Switch
Ethernet I/O module with eight Form A power relays and a 2-port switch for daisy-chain wiring. Supports Modbus TCP, MQTT and REST API for IIoT control applications.
- Eight Form A (SPST N.O.) power relays rated 5 A @ 250 VAC/24 VDC, resistive load
- 2-port 10/100 Base-TX switch for daisy-chain topology
- Modbus TCP, Modbus TCP/TLS, MQTT, Rest API, CoAP and LwM2M protocol support
- IF-THEN-ELSE logic configured in the web interface without programming
- Programmable power-on and safe values for relay outputs
- Dual watchdog with power-on and safe value
274,00 € per piece
| 1–9 pcs | 274,00 € | |
|---|---|---|
| 10–30 pcs | 266,00 € | −3 % |
| 31+ pcs | 261,00 € | −5 % |
Toote teave "ETS-7267 Ethernet I/O Module, 8-ch Power Relay with 2-Port Switch"
The ETS-7267 CR combines eight Form A power relays with a built-in two-port Ethernet switch, so modules can be daisy-chained along a network line. It suits remote switching and monitoring in IIoT installations that use Modbus TCP, MQTT, REST API, CoAP or LwM2M.
Relay power-on and safe values are programmable, and dual watchdogs (module and communication) protect the outputs. Control logic is built in the web interface as IF-THEN-ELSE rules with no programming required, supported by timer, schedule and internal register functions.
Isolation is rated at 1500 VDC on Ethernet and 3000 VDC on I/O, and there is no channel-to-channel isolation. The module mounts on DIN-rail, accepts PoE (IEEE 802.3af, Class 2) or +12 to +48 VDC, and operates from -25 to +75 °C.
Applications
- Building Automation
- Factory Automation
- Machine Automation
- Remote Maintenance
- Remote Diagnosis
- Testing Equipment
| Product type: | Ethernet I/O Module |
|---|---|
| Interface: | Ethernet |
| Protocol: | CoAP, LwM2M, Modbus TCP, MQTT, Rest API |
| Relay outputs: | 8 |
| Ports: | 2 |
| PoE: | Yes, IEEE 802.3af, Class 2 |
| Isolation: | Ethernet 1500 VDC, I/O 3000 VDC |
| Power input: | +12 to +48 VDC, PoE |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Specifications
| Software | |
|---|---|
| Function | • Web Interface for Configuration • IF-THEN-ELSE Logic operation • I/O channel monitoring and control • Timer operation • Schedule operation • Internal Register operation |
| CPU Module | |
| Watchdog Timer | Module, Communication (Programmable) |
| Isolation | |
| 2-way Isolation | Ethernet: 1500 VDC I/O: 3000 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for Each Terminal ±8 kV Air for Random Point |
| Surge (IEC 61000-4-5) | ±2 kV for Power Line |
| LED Indicators | |
| Status | Run, Ethernet, I/O |
| Relay Output | |
| Channels | 8 |
| Type | Power Relay, Form A (SPST N.O.) |
| Contact Rating | 5 A @ 250 VAC/24 VDC (Resistive Load) |
| Operate Time | 10 ms (max.) |
| Release Time | 5 ms (max.) |
| Electrical Endurance | 10^5 ops. |
| Mechanical Endurance | 2 × 10^7 ops. |
| Power on Value | Programmable |
| Safe Value | Programmable |
| Ethernet | |
| Ports | 2 x RJ-45, 10/100 Base-TX, Swtich Ports |
| LAN bypass | Yes |
| Access Control | ID, Password and IP Filter |
| Protocol | Modbus TCP, Modbus TCP/TLS, Modbus UDP, MQTT, Rest API, CoAP, LwM2M, SNMP, SMTP, SNTP, HTTP/HTTPS |
| Power | |
| Reverse Polarity Protection | Yes |
| Consumption | 4.4 W (max.) |
| Powered from PoE | Yes, IEEE 802.3af, Class 2 |
| Powered from Terminal Block | +12 to +48 VDC |
| Mechanical | |
| Dimensions (mm) | 76 x 120 x 38 (W x L x H) |
| Installation | DIN-Rail mounting |
| Environment | |
| Operating Temperature | -25 to +75°C |
| Storage Temperature | -30 to +80°C |
| Humidity | 10 to 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Logi sisse