IR-310-RM IR-Controlled 10-Channel High Power Relay Module, Modbus RTU
10-channel high power relay module with IR remote control and Modbus RTU serial interface, switching loads of up to 10 A per channel via NO/NC contacts.
- 10 channels: four 10 A and six 5 A high power relay outputs, Form C SPDT
- NO and NC terminals and a protection circuit on every channel
- Sequential control and up to 5 interlocked relay pairs
- RS-232 and RS-485 interface with Modbus RTU slave protocol
- Network IDs 1 ~ 15 (hardware) and 1 ~ 247 (software)
- IR control: 64 custom and 32 built-in commands, on-board receiver plus 3.5 mm jack for CA-IR-001
286,00 € per piece
| 1–9 pcs | 286,00 € | |
|---|---|---|
| 10–30 pcs | 278,00 € | −3 % |
| 31+ pcs | 272,00 € | −5 % |
Información sobre el producto "IR-310-RM IR-Controlled 10-Channel High Power Relay Module, Modbus RTU"
IR-310-RM is a 10-channel high power relay module for switching mains-powered appliances and loads. It offers four 10 A channels and six 5 A channels, each Form C (SPDT) with NO and NC terminals and its own protection circuit. Relays can be operated independently or in sequence, either over RS-232/RS-485 using Modbus RTU as a slave, or with an infrared remote control.
Up to five interlocked relay pairs can be configured, which suits reversing or directional switching such as CW/CCW motor control. Power-on relay values and power failure memory allow the module to restore a defined state after a supply interruption.
The IR-310-RM CR is supplied with 64 custom IR commands and 32 built-in IR commands for relay control, and is designed for manual or automatic power switching, lighting scenarios and energy conservation.
Applications
- e-Classroom service
- Lighting scenario control
- Home and building automation
- Manual and automatic power switching
- Energy conservation
- Interlocked switching, e.g. CW/CCW motor control
| Product type: | Relay Module |
|---|---|
| Interface: | RS-232, RS-485 |
| Protocol: | Modbus RTU |
| Relay outputs: | 10 |
| Operating temperature: | -25 ~ +75 °C |
Specifications
| CPU Module | |
|---|---|
| NET ID | Hardware: 1 ~ 15 Software: 1 ~ 247 |
| LED Indicators | |
| Status | 1 x Power indication 10 x Relay output indicators |
| Infrared | |
| IR Remote Commands | 64 IR commands (#0 ~ #63) corresponding to self-defined relay states. 32 IR commands (#192 ~ #223) corresponding to built-in relay states. |
| IR Remote Input | 1 x On-board IR receiver 1 x 3.5 mm audio jack (for CA-IR-001) |
| Relay Output | |
| Channels | 10 |
| Type | Form C relay SPDT |
| Contact Rating | 5A @220VAC for RL0, RL1 & RL6~RL9 10A @220VAC for RL2 ~ RL5 (Operating temperature: 25°C) |
| Operate Time | 10 ms for RL0,RL1 & RL6 ~ RL9, 15 ms for RL2 ~ RL5 |
| Release Time | 5 ms for RL0, RL1 & RL6 ~ RL9 10 ms for RL2 ~ RL5 |
| Electrical Endurance | 1 × 10^5 OPS |
| Mechanical Endurance | 1 × 10^7 OPS |
| COM Ports | |
| Ports | RS-232 (TxD, RxD, GND) RS-485 (DATA+, DATA-) |
| Baud Rate | 9600, 19200, 38400, 57600, 115200 bps |
| Data Format | Parity: None, Databits: 8, Stopbits: 1 |
| Protocol | Modbus RTU Slave |
| Power | |
| Consumption | 6.5W (max) |
| Mechanical | |
| Dimensions (mm) | 220 x 113 x 48 (W x L x H) |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 95% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Iniciar sesión