uPAC-5001D-CAN2 Palm-Size PAC, 2-Port CAN Programmable Controller
Palm-size programmable automation controller with two CAN 2.0A/2.0B ports, Ethernet, RS-232 and RS-485, for data collection, control and protocol conversion.
- Two CAN ports compatible with CAN 2.0A and 2.0B, ISO 11898-2, programmable up to 1 Mbps
- Jumper-selectable 120 Ω terminal resistor on the CAN channel
- Ethernet RJ-45 10/100 Base-TX with TCP/IP, UDP, ICMP and ARP support, plus Modbus and CAN libraries
- 80186-compatible 16-bit CPU at 80 MHz with 512 KB Flash, 512 KB SRAM and 16 KB EEPROM
- microSD storage support for 1 or 2 GB cards, built-in RTC, NVRAM and watchdog timer
- Five programmable status LEDs and a seven-segment display
503,00 € per piece
| 1–9 pcs | 503,00 € | |
|---|---|---|
| 10–30 pcs | 488,00 € | −3 % |
| 31+ pcs | 478,00 € | −5 % |
Informace o výrobku "uPAC-5001D-CAN2 Palm-Size PAC, 2-Port CAN Programmable Controller"
The uPAC-5001D-CAN2 is a palm-size programmable automation controller that brings two CAN bus channels together with Ethernet, RS-232 and RS-485 on one DIN-rail module. It suits engineers who need to gather data from several field networks and process it locally, or who need a gateway or bridge between different protocol networks.
The controller runs a DOS-like, single-task real-time operating system and accepts application programs written in C or C++. ICP DAS supplies library and demo code for the communication ports, watchdog, real-time clock, seven-segment display, flash, EEPROM and microSD storage, which shortens development by allowing sample programs to be adapted and combined.
Hardware options include a jumper-selectable 120 Ω terminal resistor for the CAN channel, redundant power inputs accepting +12 ~ +48 VDC, and a 64-bit hardware serial number for software copy protection. Its plastic casing and low power consumption of 2.5 W suit compact installations across a -25 ~ +75 °C operating range.
Applications
- Data collection from multiple CAN, RS-232, RS-485 and Ethernet devices
- Central data processing point for distributed field equipment
- Protocol conversion as a gateway or bridge between different communication networks
- Control and monitoring in a range of industrial applications
| Product type: | PAC |
|---|---|
| Interface: | CAN, Ethernet, RS-232, RS-485 |
| Protocol: | Modbus |
| Ports: | 2 CAN, 1 Ethernet, 1 RS-232, 1 RS-485 |
| Power input: | +12 ~ +48 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
| Housing: | Plastic |
Specifications
| CPU Module | |
|---|---|
| CPU | 80186 or compatible (16-bit and 80 MHz) |
| 64-bit Hardware Serial Number | Yes, for Software Copy Protection |
| EEPROM | 16KB |
| Flash | 512 KB; Erase unit is one sector (64 K bytes); 100,000 erase/write cycles |
| SRAM | 512 KB |
| Storage Expansion | Yes, can support 1 or 2 GB microSD |
| Real Time Clock | Yes |
| Watchdog Timer | Yes( 0.8 second) |
| LED Indicators | |
| Status | 5 x Programmable |
| Ethernet | |
| Ports | RJ-45 x 1, 10/100 Base-TX (Auto-negotiating, Auto MDI/MDI-X, LED indicators) |
| COM Ports | |
| Ports | 1x RS-232 (Download Port) 1 x RS-485 (with internal self-tuner ASIC) |
| CAN | |
| Controller | NXP SJA1000T with 16 MHz clock frequency |
| Ports | 2 |
| Specification | ISO 11898-2, CAN 2.0A and CAN 2.0B |
| Baud Rate | 5 k ~ 1 M bps |
| Terminal Resistor | Jumper for the 120 Ω terminal resistor |
| Power | |
| Input Range | +12 ~ +48 VDC |
| Consumption | 2.5 W |
| Mechanical | |
| Casing | Plastic |
| Dimensions (mm) | 91 x 123 x 52 (W x L x H) |
| Installation | DIN-Rail |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Přihlásit