Přejít na hlavní obsah Přeskočit na vyhledávání Přeskočit na hlavní navigaci

DB-24SSR 24-ch AC Solid-State Relay Daughter Board, Form A, 50-pin Header

Informace o výrobku "DB-24SSR 24-ch AC Solid-State Relay Daughter Board, Form A, 50-pin Header"

The DB-24SSR provides 24 Form A solid-state relays on a single daughter board. Each relay is switched by a 5 V signal applied to its channel on the 50-pin header or the 37-pin D-sub connector, so it can be driven directly from a logic output without a mechanical contact.

Relay outputs are rated at 4 A at 240 VAC. Because the board isolates the host computer from high-voltage loads and removes ground-loop problems, it suits field wiring of switched AC loads. Twenty-four LEDs show the status of each relay, and screw terminals simplify wiring. Since the 37-pin D-sub connector accepts TTL outputs from other boards, the DB-24SSR can also serve as a general-purpose solid-state relay output board.

  • 24 Form A (normally open) solid-state relay channels
  • Rated 4 A at 240 VAC, 0.4 A @ +5 V maximum consumption
  • Supplied with CA-5015 flat cable, 50-pin, 1.5 m
  • Dimensions 130 mm x 220 mm x 32 mm (W x L x H)

Applications

  • On/off control
  • Energy management
  • Test automation
  • Process control
Product type: Relay output board
Interface: 37-pin D-sub, 50-pin header
Relay outputs: 24
Operating temperature: 0 ~ 60 °C

Specifications

Relay Output
Channels24 X FORM A
TypeSSR
Contact Rating4 A @ 240VAC
Operate Time1/2 cycle of voltage sina wave 1ms (max)
Electrical EnduranceLong Life, No Arcing, No Bounce, No Switching Noise
Power
Consumption0.4 A @ +5 V (max.)
Mechanical
Dimensions (mm)130 mm x 220 mm x 32 mm (W x L x H)
Environment
Operating Temperature0 ~ 60°C
Storage Temperature-20 ~ 70°C
Humidity5% ~ 90% RH, non-condensing

Specifications as published by the manufacturer. Subject to change.

0 z 0 hodnocení

Průměrné hodnocení 0 z 5 hvězd

Zadejte své hodnocení!

Sdělte nám své zkušenosti s produktem s jinými zákazníky.