CAN-8423-G CANopen Slave Remote I/O Unit with 4 I/O Slots

CAN-8123-G is a CANopen slave unit for distributed I/O on CAN bus networks. It follows CiA 301 v4.02 and CiA 401 v2.1, so it can be integrated with standards-based CANopen masters. Process data is handled through PDOs with several transmission modes, and PDO mapping is available for configuring which data is exchanged.A single expansion slot lets you tailor the I/O to the application. The unit accepts a range of ICP DAS digital and analogue slot modules from the I-87K and I-8000 series, covering digital inputs, digital outputs, analogue inputs and analogue outputs. A utility is supplied to generate the EDS file dynamically, which is based on CiA SP306 and is intended for compatibility with different CANopen master interfaces.The unit has an integrated 120Ω terminating resistor, isolation ratings of 3000 VDC (DC-to-DC) and 2500 Vrms (photo-coupler), and an operating range of -25 ~ +75 °C. It mounts on a DIN rail and is suited to industrial machinery, laboratory equipment, maritime and medical installations among other sectors.ApplicationsIndustrial MachineryLaboratory Equipment & ResearchRestaurant AppliancesMaritimeMedicalSpecialty Vehicles

CAN-8223-G is a CANopen slave remote I/O unit that lets engineers add field I/O to a CANopen network by fitting plug-in modules into its two expansion slots. It follows CiA 301 v4.02 and CiA 401 v2.1, so it can be integrated with standard CANopen masters.Each slot accepts digital input, digital output, analogue input or analogue output modules from the I-87K or I-8000 series, so the channel mix can be tailored to the application. Process data mapping and emergency messaging are supported, and the bundled utility generates an EDS file dynamically, based on CiA SP306, for compatibility with different CANopen master interfaces.The unit has a built-in 120Ω terminal resistor, a 10 k to 1 M baud rate range and a Node ID range of 1 to 255. Its operating range of -25 to +75 °C and DIN-rail or wall mounting make it suitable for installation in demanding industrial enclosures.ApplicationsIndustrial MachineryLaboratory Equipment & ResearchRestaurant AppliancesMaritimeMedicalSpecialty Vehicles

The CAN-8823-G CR is a CANopen slave unit that lets you build a distributed I/O node on a CAN bus. Eight expansion slots accept a mix of digital and analogue I/O modules, so you can tailor the channel count and signal types to the application rather than buying a fixed-configuration device.It follows CiA 301 v4.02 and CiA 401 v2.1 and provides dynamic PDO configuration, EMCY messaging, error output values and both cyclic and acyclic SYNC operation. The Node ID is set with a rotary switch, and the CAN-8823 Utility can generate an EDS file dynamically for configuring different CANopen masters.Choose this model when you need a configurable CANopen slave with expandable I/O in industrial machinery, laboratory equipment, maritime, medical or specialty vehicle systems. The unit is UKCA, FCC, RoHS and WEEE listed.ApplicationsIndustrial machineryLaboratory equipment and researchRestaurant appliancesMaritimeMedicalSpecialty vehicles

The CAN-8424-G is a DeviceNet remote I/O unit built around a modular backplane with four slots, so engineers can assemble the I/O mix their application needs. It suits data acquisition and control tasks where a DeviceNet network needs local I/O under a single controller.Configuration is handled with the CAN-8424 Utility, which connects through the RS-232 utility port. The tool generates the EDS file for the I/O modules fitted, so the unit can be integrated into a DeviceNet scan list without manual device description work.Supports Poll, Bit-Strobe and Change of State/Cyclic I/O operating modesRated for the DC power range of +10 VDC to +30 VDC, with a typical consumption of 2.5 WDesigned for DIN-rail mounting within an operating range of -25 ~ +75 ℃ApplicationsDiagnostic systems for wheeled tractors