iP-8417 ISaGRAF SoftLogic PAC, 4-Slot RS-485 Controller with MiniOS7
ISaGRAF SoftLogic PAC with an 80 MHz 80186 CPU, MiniOS7 and four hot-swap slots for I-87K high profile serial I/O modules, plus RS-232/485 serial ports.
- Embedded ISaGRAF Ver.3 SoftLogic programming to IEC 61131-3
- 80186 CPU at 80 MHz running MiniOS7
- Four hot-swap slots for I-87K high profile serial I/O modules
- Four serial ports (RS-232/485), including one RS-485 port with 3000 VDC isolation
- Modbus RTU/ASCII Master, Modbus RTU Slave, DCON and CAN/CANopen support listed
- 512 KB battery-backed SRAM retains data
574,00 € per piece
| 1–9 pcs | 574,00 € | |
|---|---|---|
| 10–30 pcs | 557,00 € | −3 % |
| 31+ pcs | 546,00 € | −5 % |
Информация за продукта "iP-8417 ISaGRAF SoftLogic PAC, 4-Slot RS-485 Controller with MiniOS7"
iP-8417 CR is a four-slot programmable automation controller from the iPAC-8000 series, running embedded ISaGRAF Ver.3 SoftLogic to IEC 61131-3 on an 80186 CPU at 80 MHz under the MiniOS7 operating system. It suits engineers who want IEC 61131-3 control logic on a DIN-rail controller with local I/O expansion and several serial links.
The unit provides four hot-swap slots for I-87K high profile serial I/O modules. Four serial ports (RS-232/485) allow connection to field devices and networks. Remote I/O is also supported through RS-485 modules from the I-7000 series, as well as RU-87Pn or I-87Kn expansion units.
Data retention is handled by 512 KB of battery-backed SRAM, and each controller carries a 64-bit hardware serial number. The redundant power inputs accept +10 ~ 30 VDC. This is the RoHS version listed under the CR ordering code. ISaGRAF cannot run on 64-bit Windows 7/8 PCs, so check the programming workstation before commissioning.
Applications
- Distributed control with IEC 61131-3 logic using ISaGRAF
- Remote I/O networks using RS-485 I-7000 series modules
- Serial data acquisition and control with I-87K expansion modules
| Product type: | PAC |
|---|---|
| Interface: | RS-485 |
| Protocol: | Modbus RTU |
| Ports: | 4 |
| Isolation: | 3000 VDC (RS-485) |
| Power input: | +10 ~ 30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail, Wall |
Specifications
| Software | |
|---|---|
| OS | MiniOS7 |
| Protocol | • NET ID • Modbus RTU/ASCII Master • Modbus RTU Slave • DCON Protocol • User-defined Protocol • I/O Type: DCON, Modbus RTU remote I/O • FRnet I/O • SMS • CAN/CANopen |
| Development | Embedded ISaGRAF Ver.3 SoftLogic (IEC 61131-3) |
| CPU Module | |
| CPU | 80186 or compatible, 16-bit and 80 MHz |
| 64-bit Hardware Serial Number | Yes |
| EEPROM | 16 KB |
| Flash | 512 KB |
| NVRAM | 31 Bytes |
| SRAM | 512 KB SRAM, 512 KB Dual battery backup SRAM |
| Storage Expansion | Yes, but ISaGRAF does not support |
| Real Time Clock | Provide seconds, minutes, hours, dates, day of week, month, year |
| Watchdog Timer | Yes |
| Display | |
| Type | 5 x Digit 7 Segment LED Display |
| LED Indicators | |
| Status | 3 x Programmable |
| I/O Expansion | |
| I/O Type | I-8K, I-87K series |
| Slots | 4 |
| HMI | |
| DIP Switch | 8-bit for address |
| Push Button | 4 |
| COM Ports | |
| Ports | 2 x RS-232, 1 x RS-485 (3000 VDC Isolated), 1 x RS-232/RS-485 |
| Power | |
| Input Range | +10 ~ 30 VDC (1 kV Isolated ) |
| Consumption | 6.7 W |
| Mechanical | |
| Dimensions (mm) | 231 x 132 x 111 (W x L x H) |
| Installation | DIN-Rail, Wall mounting |
| Environment | |
| Operating Temperature | -25 ~ +75°C |
| Storage Temperature | -30 ~ +80°C |
| Humidity | 10 ~ 90 % RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Вход