ET-7028 Ethernet I/O Module, 8-ch Analog Output
8-channel analogue output Ethernet I/O module with Modbus TCP and Modbus UDP support, jumper-selectable voltage or current outputs and 2500 VDC I/O isolation.
- Eight analogue output channels with per-channel configuration
- Jumper-selectable voltage (±5 V, ±10 V, 0 ~ +10 VDC) or current (0 ~ 20 mA, 4 ~ 20 mA) outputs
- 12-bit resolution with ±0.1% of FSR accuracy
- Modbus TCP and Modbus UDP over a single 10/100 Base-TX RJ-45 port
- Built-in web server and web HMI
- Access control by ID, password and IP filter
360,00 € per piece
| 1–9 pcs | 360,00 € | |
|---|---|---|
| 10–30 pcs | 349,00 € | −3 % |
| 31+ pcs | 342,00 € | −5 % |
Информация за продукта "ET-7028 Ethernet I/O Module, 8-ch Analog Output"
The ET-7028 CR is an Ethernet I/O module that provides eight analogue output channels for controlling field devices from a network. It suits engineers who need networked analogue control in building, factory and machine automation.
Each channel can be set to a voltage range (+0 ~ +5 VDC, ±5 VDC, +0 ~ +10 VDC or ±10 VDC) or a current range (0 ~ 20 mA or 4 ~ 20 mA). The output type is chosen per channel by jumper position, and channels can be configured individually. Output resolution is 12-bit with an accuracy of ±0.1% of FSR, and open wire detection is available for 4 ~ 20 mA use. Power-on and safe values are programmable.
Communication uses one RJ-45 10/100 Base-TX port with Modbus TCP and Modbus UDP. A built-in web server and web HMI, ID, password and IP filter access control, and programmable module and communication watchdogs support secure and supervised operation. The module is powered from +10 ~ +30 VDC with reverse polarity protection and is designed for DIN-rail mounting over -25 ~ +75 °C.
Applications
- Building automation
- Factory automation
- Machine automation
- Remote maintenance
- Remote diagnosis
- Testing equipment
| Product type: | Ethernet I/O Module |
|---|---|
| Interface: | Ethernet |
| Protocol: | Modbus TCP, Modbus UDP |
| Analog outputs: | 8 |
| Ports: | 1 |
| Isolation: | 2500 VDC (I/O) |
| Power input: | +10 ~ +30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Specifications
| Software | |
|---|---|
| Built-in Web Server | Yes |
| CPU Module | |
| Watchdog Timer | Module, Communication (Programmable) |
| Isolation | |
| 2-way Isolation | Ethernet: 1500 VDC I/O: 2500 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for Each Terminal ±8 kV Air for Random Point |
| LED Indicators | |
| Status | Run, Ethernet |
| Analog Output | |
| Channels | 8 |
| Type | Voltage Current |
| Range | +0 ~ +5 VDC, ±5 VDC, +0 ~ +10 VDC, ±10 VDC 0 ~ 20 mA, 4 ~ 20 mA (Jumper Selectable) |
| Resolution | 12-bit |
| Accuracy | ±0.1% of FSR |
| Open Wire Detection | For 4 ~ 20 mA only |
| Voltage Output Capability | 10 V @ 10 mA |
| Current Load Resistance | 500 Ω |
| Individual Channel Configuration | Yes |
| Power-on Value | Programmable |
| Safe Value | Programmable |
| Ethernet | |
| Ports | 1 x RJ-45, 10/100 Base-TX |
| Access Control | ID, Password and IP Filter |
| Protocol | Modbus TCP, Modbus UDP |
| Power | |
| Reverse Polarity Protection | Yes |
| Consumption | 6.0 W (max.) |
| Powered from Terminal Block | +10 ~ +30 VDC |
| Mechanical | |
| Dimensions (mm) | 72 x 123 x 35 (W x L x H) |
| Installation | DIN-Rail mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Вход