EIP-2055 EtherNet/IP Module, 8-ch Isolated DI and 8-ch DO
The EIP-2055 CR is an EtherNet/IP remote I/O adapter with 8 isolated digital inputs (with counter function) and 8 open-collector digital outputs, mounted on DIN-rail.
- EtherNet/IP adapter with 8 digital inputs (counter capable) and 8 open-collector digital outputs
- Two 10/100 Base-TX RJ-45 ports with auto-negotiation, auto MDI/MDIX and daisy chain support
- 8 inputs with counter up to 3 kHz and 32-bit counts; 3000 VDC isolation on outputs
- Power-on value and safe value settings for outputs
- Powerful 32-bit MCU for efficient network traffic handling
- LEDs for I/O status and connection status
182,00 € per piece
| 1–9 pcs | 182,00 € | |
|---|---|---|
| 10–30 pcs | 177,00 € | −3 % |
| 31+ pcs | 173,00 € | −5 % |
Информация за продукта "EIP-2055 EtherNet/IP Module, 8-ch Isolated DI and 8-ch DO"
The EIP-2055 CR is a remote digital I/O module that brings 8 isolated inputs and 8 open-collector outputs onto an EtherNet/IP network. It is designed as an EtherNet/IP adapter, so it can be added to an existing Ethernet/IP control architecture with the I/O points reachable over the network.
The two 10/100 Base-TX RJ-45 ports support daisy chain connection, which reduces cabling and simplifies device placement. The module can also be deployed in star, line or ring topologies. The digital inputs support wet and dry contacts, with a counter function up to 32-bit (4294967295) counts at 3 kHz, and the outputs are rated for loads from +3.5 V to +50 V. Power-on and safe values can be set for the outputs.
LEDs show both the I/O status and the connection status, which helps with commissioning and fault finding. Firmware can be updated over Ethernet, and a software utility is provided for configuring and testing the module. Note that load current and power consumption differ between the Non-RevB and RevB hardware, so check the revision when designing for the output current budget.
Applications
- Building Automation
- Factory Automation
- Machine Automation
- Remote Maintenance
- Remote diagnosis
- Testing Equipment
| Product type: | Remote I/O module |
|---|---|
| Interface: | 10/100 Base-TX |
| Protocol: | EtherNet/IP |
| Digital inputs: | 8 |
| Digital outputs: | 8 |
| Ports: | 2 |
| Isolation: | 3000 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Specifications
| Digital Input/Counter | |
|---|---|
| Channels | 8 |
| Type | Wet/Dry Contact |
| Sink/Source (NPN/PNP) | Sink/Source |
| ON Voltage Level | +5 VDC ~ +50 VDC |
| OFF Voltage Level | +1 VDC Max. |
| Max. Counts | 32-bit (4294967295) |
| Frequency | 3 kHz |
| Input Impedance | 7.5 kΩ |
| Overvoltage Protection | +70 VDC |
| Digital Output | |
| Channels | 8 |
| Type | Open Collector |
| Sink/Source (NPN/PNP) | Sink |
| Load Voltage | +3.5 V ~ +50 V |
| Load Current | Non-RevB : 700 mA per channel ; RevB : 650 mA per channel |
| Isolation | 3000 VDC |
| Ethernet | |
| Ports | 10/100 Base-TX, 8-pin RJ-45 x 2 Support daisy chain connection |
| Protocol | Ethernet/IP (Adapter) |
| Power | |
| Consumption | Non-RevB : 1.6W ; RevB : 2.9W Max |
| Mechanical | |
| Dimensions (mm) | 110 x 90 x 33 (H x W x D) |
| Installation | DIN-Rail |
| Environment | |
| Operating Temperature | -25℃ ~ +75℃ |
| Storage Temperature | -30℃ ~ +80℃ |
| Humidity | 10% ~ 90% |
Specifications as published by the manufacturer. Subject to change.
Downloads
Вход