DP-1200 24 VDC/5 A DIN-Rail Power Supply, 85~264 VAC Input, 120 W
DIN-rail 120 W power supply with 85~264 VAC input and 24 VDC/5 A output, built-in PFC and an adjustable 23 V ~ 28 V output range for industrial panels.
- Built-in PFC with 90% typical efficiency at 230 VAC
- 24 VDC output rated at 5 A / 120 W from an 85~264 VAC input
- Adjustable output range of 23 V ~ 28 V
- 60% power boost ability
- Short circuit protection with auto recovery and over voltage latch-off
- Hold-up time longer than 20 ms at 115 VAC
216,00 € per piece
| 1–9 pcs | 216,00 € | |
|---|---|---|
| 10–30 pcs | 210,00 € | −3 % |
| 31+ pcs | 206,00 € | −5 % |
Informacije o izdelku "DP-1200 24 VDC/5 A DIN-Rail Power Supply, 85~264 VAC Input, 120 W"
The DP-1200 CR is a DIN-rail power supply that converts an 85~264 VAC input into a regulated 24 VDC output rated at 5 A (120 W). A built-in power factor correction stage and a typical efficiency of 90% at 230 VAC help keep losses and input harmonics under control in cabinet installations.
The output voltage can be adjusted between 23 V and 28 V, and the unit offers a 60% power boost ability for loads that briefly exceed the rated figure. Output ripple and noise are specified at less than 50 mVp-p, with a voltage tolerance of ±2% and load regulation of ±0.5%.
Protection and environmental details include automatic recovery after a short circuit, latch-off on over voltage and a hold-up time of longer than 20 ms at 115 VAC. The metal casing measures 65 × 125 × 103 mm, operates from -10°C to +70°C with derating of typically 3 W/K above 60°C, and is rated RoHS and WEEE.
| Product type: | Power supply |
|---|---|
| Power input: | 85~264 VAC |
| Operating temperature: | -10 ~ +70 °C |
| Mounting: | DIN-rail |
| Housing: | Metal |
Specifications
| Safety | |
|---|---|
| Standard | UL 1950, UL 508 CSA 22.2 No. 950-M90 EN 60 950 |
| EMC | |
| Standard | FCC: docket 20780 curve "B" EN55022 "B", EN61000-3-2 class D |
| Input | |
| Voltage Range | 85 VAC ~ 264 VAC |
| Frequency Range | 47 Hz ~ 63 Hz |
| Inrush Current (Typ.) | COLD START less than 15A at 115 VAC less than 30A at 230 VAC |
| Output | |
| Ripple & Noise (Max.) | <50mVp-p |
| Voltage Tolerance | ±2% |
| Linearity | ±0.1% |
| Load Regulation | ±0.5% |
| Hold Up Time (Typ.) | longer than 20 ms at 115 VAC |
| DC Voltage | 24 VDC |
| Rated Power | 120 W |
| Rated Current | 5 A |
| Efficiency | 90% typical at 230 VAC |
| Short Circuit Protection | auto recovery |
| Protection | |
| Over Voltage | latch off |
| Mechanical | |
| Casing | Metal |
| Dimensions (mm) | (65 * 125 * 103)mm |
| Environment | |
| Operating Temperature | -10°C ~ +70°C (derating: typ. 3W/K > 60°C) |
| Storage Temperature | -25°C ~ +85°C |
Specifications as published by the manufacturer. Subject to change.
Prijava