Preskoči na glavno vsebino Preskoči na iskanje Preskoči na glavno navigacijo

WISE-7144 Intelligent I/O Module with PoE, 8-ch DI and 8-ch DO

Informacije o izdelku "WISE-7144 Intelligent I/O Module with PoE, 8-ch DI and 8-ch DO"

The WISE-7144 CR is a web-configurable I/O module for remote control and monitoring. Control logic is set up through its built-in web pages in a browser, so no separate software tool or programming is needed. IF-THEN-ELSE rules, timers and I/O channel monitoring cover many standard remote control tasks.

It takes power from an IEEE 802.3af Class 1 PoE network over Ethernet, or from a 12 ~ 48 VDC terminal block where PoE is not available. Each of the eight digital inputs is an isolated wet contact channel that also works as a counter, and each of the eight isolated open collector outputs can drive 300 mA at 25 °C, including direct drive of power relay modules.

Modbus TCP support allows the module to be integrated into SCADA systems. The module suits building, factory and machine automation projects, as well as remote maintenance and diagnosis equipment.

Applications

  • Building Automation
  • Factory Automation
  • Machine Automation
  • Remote Maintenance
  • Remote diagnosis and Testing Equipment
Product type: Intelligent I/O Module
Interface: Ethernet RJ-45
Protocol: Modbus TCP
Digital inputs: 8
Digital outputs: 8
Ports: 1
PoE: Yes
Isolation: 2500 VDC
Power input: 12 ~ 48 VDC
Operating temperature: -25 ~ +75 °C
Mounting: DIN-rail, Wall

Specifications

Software
Protocol• Modbus TCP
• CGI Command (Sending)
Function• Web Interface for Configuration
• IF-THEN-ELSE Logic operation (36 rule supported)
• I/O channel monitoring and control
• Timer operation (12 set supported)
• Internal Register operation (48 set supported)
• Recipe operation (12 set supported)
• Advanced P2P (8 set supported)
• non-SSL Email sending function
CPU Module
CPU16-bit CPU (80 MHz)
Isolation
Intra-module Isolation2500 VDC
EMS Protection
EFT (IEC 61000-4-4)±4 kV for Power Line
ESD (IEC 61000-4-2)±4 kV Contact for each terminal and ±8 kV Air for random point
LED Indicators
Status1 x PoE Power
1 x System Running
1 x Ethernet Link/Act
1 x Ethernet 10/100M Speed
Digital Input/Counter
Channels8
TypeWet Contact
Sink/Source (NPN/PNP)Sink/Source
ON Voltage Level+10 VDC ~ +50 VDC
OFF Voltage Level+4 VDC Max.
Max. Counts16-bit (65535)
Frequency50 Hz
Min. Pulse Width10 ms
Input Impedance10 kΩ
Overvoltage Protection+70 VDC
Digital Output
Channels8
TypeIsolated Open Collector
Sink/Source (NPN/PNP)Sink
Load Voltage+10 VDC ~ +40 VDC
Load Current300 mA/Channel at 25 °C
Direct drive power relay module
Overvoltage Protection60 VDC
Overload Protection1.4 A
Short-circuit ProtectionYes
Ethernet
PortsRJ-45 x 1, 10/100 Base-TX and automatic MDI/MDI-X
PoEYes
Power
Reverse Polarity ProtectionYes
Input Range12 ~ 48 VDC
Consumption2.5 W
Powered from PoEYes, IEEE 802.3af, Class 1
Powered from Terminal BlockYes, 12 ~ 48 VDC
Mechanical
Dimensions (mm)72 x 123 x 35 (W x L x H)
InstallationDIN-Rail Mounting/Wall Mounting
Environment
Operating Temperature-25 ~ +75 °C
Storage Temperature-30 ~ +80 °C
Humidity10 ~ 90% RH, Non-condensing

Specifications as published by the manufacturer. Subject to change.

0 od 0 ocen

Povprečna ocena 0 od 5 zvezdic

Pustite pregled!

Delite svoje izkušnje z drugimi strankami.