SG-3784M 4-Channel 4~20 mA to 4-Channel PWM Signal Conditioning Module
Signal conditioning module converting four 4~20 mA DC current inputs to four PWM outputs at 600~800 Hz, with an LCD display and button-based configuration.
- Four 4~20 mA DC current inputs converted to four PWM outputs
- Duty cycle 1 to 100%, linearly proportional to the input current
- PWM frequency 600 ~ 800 Hz, adjustable with the front-panel buttons
- Input accuracy ±0.1% of full range
- 2.7-inch monochrome LCD shows duty ratio and frequency for each PWM channel
- ±4 kV ESD (contact, each terminal) and ±4 kV EFT protection
193,00 € per piece
| 1–9 pcs | 193,00 € | |
|---|---|---|
| 10–30 pcs | 187,00 € | −3 % |
| 31+ pcs | 183,00 € | −5 % |
Informacije o izdelku "SG-3784M 4-Channel 4~20 mA to 4-Channel PWM Signal Conditioning Module"
The SG-3784M converts four 4~20 mA DC current signals into four PWM outputs. Each duty cycle runs linearly from 1 to 100% across the 4~20 mA input range, which makes it a straightforward option where a current loop signal must drive a PWM-controlled load.
The PWM frequency is set between 600 and 800 Hz and is adjusted with the four front-panel buttons. A 2.7-inch monochrome graphic LCD shows the duty ratio and frequency of all four PWM channels at once, so commissioning and checking can be done on site without a PC. Input accuracy is ±0.1% of full range.
Electrical noise immunity is rated at ±4 kV for ESD (contact, each terminal) and ±4 kV for EFT on the power line. The module runs from a 10 ~ 30 VDC supply with reverse polarity protection and mounts on DIN-rail or wall, with an operating range of -25 ~ +75 °C.
Applications
- Heating systems in buildings
- Ventilation systems
- Controlling servo-assisted diaphragm valves
| Product type: | Signal conditioning module |
|---|---|
| Interface: | 4~20 mA input, PWM output |
| Analog inputs: | 4 |
| Power input: | 10 ~ 30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail, Wall |
Specifications
| Display | |
|---|---|
| Type | Monochrome Graphics LCD (46x48 mm Viewing Area) |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for each Terminal |
| LED Indicators | |
| Status | 1 x Power and Communication |
| Analog Input | |
| Channels | 4 |
| Range | +4 ~ +20 mA |
| Accuracy | ±0.1% of full range |
| Bandwidth | 1 kHz |
| Input Impedance | 137 Ω |
| PWM | |
| Channels | 4 |
| Type | PWM |
| Sink/Source (NPN/PNP) | Source |
| Frequency | 600 ~ 800 Hz |
| Duty Cycle | 1 to 100% |
| Mode | Continuous |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | +10 ~ +30 VDC |
| Consumption | 0.1 W (Typ.) 96.2 W Max. (Note1) |
| Mechanical | |
| Dimensions (mm) | 97 x 121 x 36 (W x L x H) |
| Installation | DIN-Rail or Wall Mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -40 ~ +80 °C |
| Humidity | 10 ~ 95% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Prijava