PM-3112-160P-CPS CANopen 2-Loop Single-Phase Power Meter, 100 A CT
CANopen single-phase power meter with two loops, supplied with two 100 A clip-on CTs (16 mm aperture, 4 m leads) for real-time power and energy monitoring.
- CANopen interface with DIP-switch selectable baud rate: 125 k (default), 250 k, 500 k or 1 M
- Two independent single-phase loops (1P2W), each with its own reference voltage
- Two 100 A clip-on CTs, 16 mm inside diameter, 4 m wire lead, current range 0.1 ~ 100 A
- Voltage input 10 ~ 300 VAC; W accuracy better than 0.5% (PF=1)
- Two Form A power relay outputs, 5 A @ 250 VAC / 5 A @ 30 VDC
- True RMS measurement of voltage, current, active, apparent and reactive power and energy, power factor and frequency
256,00 € per piece
| 1–9 pcs | 256,00 € | |
|---|---|---|
| 10–30 pcs | 248,00 € | −3 % |
| 31+ pcs | 243,00 € | −5 % |
Informacije o izdelku "PM-3112-160P-CPS CANopen 2-Loop Single-Phase Power Meter, 100 A CT"
PM-3112-160P-CPS CR is a DIN-rail power meter that reports real-time electrical usage for two independent single-phase loops over CANopen. Each loop has its own reference voltage, so one unit can cover two feeds in a compact enclosure.
This variant is fitted with two 100 A clip-on current transformers with a 16 mm inside diameter and 4 m wire leads, which makes installation on existing conductors straightforward. The voltage input accepts 10 ~ 300 VAC, and two Form A power relay outputs rated 5 A @ 250 VAC or 30 VDC can drive sirens or lights for alarm signalling.
- Measures Vrms, Irms, kW, kWh, kVA, kVAh, kVAR, kVARh, power factor and frequency
- Updates data every second
- Designed for use on generator, switchgear and distribution circuits
Applications
- Generator monitoring
- Switchgear distribution systems
- Energy management
| Product type: | Power meter |
|---|---|
| Interface: | CANopen |
| Protocol: | CANopen |
| Relay outputs: | 2 |
| Power input: | +12 ~ 48 VDC |
| Operating temperature: | -20 ~ +70 °C |
| Mounting: | DIN-rail |
| Housing: | Plastic |
Specifications
| AC Power Measurement | |
|---|---|
| Wiring | 1P2W-1CT |
| Loops | 1-phase: 2 |
| Input Voltage | 10 ~ 300 V |
| Input Current | PM-3112-100-CPS: CTØ10 mm (0.05 A ~ 60 A) PM-3112-100P-CPS: CTØ10 mm (0.05 A ~ 60 A) PM-3112-160-CPS: CTØ16 mm (0.1 A ~ 100 A) PM-3112-160P-CPS: CTØ16 mm (0.1 A ~ 100 A) PM-3112-240-CPS: CTØ24 mm (0.15 A ~ 200 A) PM-3112-240P-CPS: CTØ24 mm (0.15 A ~ 200 A) |
| Input Frequency | 50/60 Hz |
| W Accuracy | Better than 0.5% (PF=1) |
| Power Parameter Measurement | True RMS voltage (Vrms), True RMS current (Irms), Active Power (kW), Active Energy (kWh), Apparent Power (kVA), Apparent Energy (kVAh), Reactive Power (kVAR), Reactive Energy (kVARh), Power Factor (PF), Frequency |
| Data Update Rate | 1 Second |
| Relay Output | |
| Channels | 2 |
| Type | Power Relay |
| Contact Rating | Form A: 5 A @ 250 VAC 5 A @ 30 VDC |
| CANopen | |
| Baud Rate | 125 k (default), 250 k, 500 k, 1 M; DIP Switch Selectable |
| Protocol | CANopen |
| Power | |
| Input Range | +12 ~ 48 VDC |
| Consumption | 2W |
| Mechanical | |
| Casing | Plastic |
| Dimensions (mm) | 33 x 127 x 100 (W x L x H) |
| Installation | DIN-Rail Mounting |
| Environment | |
| Operating Temperature | -20 ~ +70 °C |
| Storage Temperature | -25 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Prijava