PIR-130-AC PIR Motion and Temperature Sensor Module, RS-485 Modbus RTU
Ceiling-mount PIR motion and temperature sensor module with a Form C relay output and RS-485 interface supporting DCON and Modbus RTU. Powered from 110 ~ 220 VAC.
- 360° PIR detection with up to 8 m diameter coverage and a maximum detection height of 4 m
- Adjustable time delay, lux control level and sensitivity, with a built-in photo sensor for smart switch-on
- Form C power relay: 10 A NO and 6 A NC at 250 VAC; up to 1500 W incandescent or 300 W fluorescent (T8)
- Integrated temperature sensor, range -25 ~ +100°C, resolution 0.0625°C, accuracy ±2°C
- Programmable fire alarm threshold, factory-set at 65°C
- RS-485 interface with DCON and Modbus RTU protocols, 1200 to 115200 baud
124,00 € per piece
| 1–9 pcs | 124,00 € | |
|---|---|---|
| 10–30 pcs | 121,00 € | −2 % |
| 31+ pcs | 118,00 € | −5 % |
Informacije o izdelku "PIR-130-AC PIR Motion and Temperature Sensor Module, RS-485 Modbus RTU"
PIR-130-AC (ordering code PIR-130-AC CR) combines a 360° passive infrared motion sensor with a temperature sensor in one ceiling-mounted module. It is aimed at indoor lighting and ventilation control, where it can switch a connected load when motion is detected, and at room temperature monitoring or fire alarm signalling.
The motion section has a photo sensor, so switching can take ambient light into account. Time delay, lux level and sensitivity can be adjusted, using hardware switches or software settings. A relay output, rated at 10 A NO and 6 A NC at 250 VAC, can switch lights directly, with loads of up to 1500 W incandescent or 300 W fluorescent (T8).
Status is reported over a single RS-485 port that supports DCON and Modbus RTU at baud rates from 1200 to 115200. Two LEDs show power and communication status and alarm state, which helps with commissioning and fault finding.
Applications
- Lights and exhaust fans in common toilets
- Common staircases
- Parking lights
- Garden lights
- Changing rooms in shops
- Corridors
- Room temperature measurement
- Fire alarm signalling
| Product type: | PIR motion and temperature sensor |
|---|---|
| Interface: | RS-485 |
| Protocol: | DCON, Modbus RTU |
| Relay outputs: | 1 |
| Ports: | 1 |
| Power input: | 110 ~ 220 VAC |
| Operating temperature: | 0 ~ +35 °C |
| Mounting: | Ceiling |
Specifications
| EMS Protection | |
|---|---|
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for each Terminal, ±8 kV Air for Random Point |
| LED Indicators | |
| Status | Yes, 1 as Power/Communication Indicator. 1 as Alarm Indicator |
| PIR | |
| Detection Height | 4 meters Max. |
| Detection Field of View | 360°; 8 m Diameter Max. |
| Lux Control Level | Hardware: 2 modes (Dawn and dust) / Software: 5-step |
| Delay Time | Hardware: 8-step Switch-selectable (seconds): 6, 16, 33, 66, 131, 262, 524, 1049 Software: 16-step (seconds): 2, 4, 6, 8, 16, 33, 49, 66, 131, 262, 393, 524, 1049, 2097, 3146, 4194 |
| PIR Response Time | 1 second |
| Temperature Measurement | |
| Fire Alarm | 65°C (Programmable) |
| Range | -25 ~ +100°C |
| Resolution | 0.0625°C |
| Accuracy | ±2°C |
| Relay Output | |
| Channels | 1 |
| Type | Power Relay, Form C |
| Contact Rating | NO: 10 A @ 250 VAC NC: 6 A @ 250 VAC |
| COM Ports | |
| Ports | 1 x RS-485 |
| Baud Rate | 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 |
| Protocol | DCON, Modbus RTU |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | 110 ~ 220 VAC |
| Consumption | 2 W |
| Mechanical | |
| Dimensions (mm) | Ø121 x 52 (Ø x H) |
| Installation | Ceiling mounting |
| Ingress Protection Rating | IP20 |
| Environment | |
| Operating Temperature | 0 ~ +35°C |
| Storage Temperature | -30 ~ +80°C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Prijava