PCI-826LU Universal PCI DAQ Board, 250 kS/s 16-bit AI, 32-ch Programmable DIO
PCI-826LU CR is a universal PCI multifunction board with 32 single-ended or 16 differential 16-bit analogue inputs at up to 250 kS/s, plus 2-channel analogue output and 32 programmable DIO channels.
- Universal PCI interface supporting 3.3 V and 5 V PCI bus
- 32 single-ended or 16 differential analogue inputs, jumper selectable, 16-bit resolution at 250 kS/s
- Programmable gain of 1, 2, 4 and 8 with bipolar ranges up to ±10 V
- 8 K-sample hardware FIFO with software and pacer triggers
- Built-in MagicScan controller with polling or interrupt data transfer
- 2-channel 16-bit analogue output
460,00 € per piece
| 1–9 pcs | 460,00 € | |
|---|---|---|
| 10–30 pcs | 446,00 € | −3 % |
| 31+ pcs | 437,00 € | −5 % |
Informacije o izdelku "PCI-826LU Universal PCI DAQ Board, 250 kS/s 16-bit AI, 32-ch Programmable DIO"
The PCI-826LU CR is a multifunction data acquisition board for PCI slots, combining high-speed analogue input with analogue output and programmable digital I/O on a single card. Its universal PCI interface supports both 3.3 V and 5 V PCI buses, which suits a range of host computers.
The 16-bit A/D converter samples at up to 250 kS/s and is buffered by an 8 K-sample hardware FIFO. A built-in MagicScan controller handles channel selection, gain, settling time, conversion and data retrieval, so the host CPU is largely offloaded, even when scanning channels with different gain codes. Software and pacer triggers are supported, with polling or interrupt data transfer.
Pull-high and pull-low resistors on the digital inputs keep unconnected channels at a defined level, and digital output status can be read back at register level. A Card ID switch lets software identify individual boards when two or more PCI-826LU cards are installed in the same computer. The ordering code includes one CA-4002 D-Sub connector.
Applications
- High speed data acquisition system
- Process monitor and control
- Vibration analysis
| Product type: | DAQ board |
|---|---|
| Interface: | Universal PCI |
| Digital inputs: | 32 |
| Digital outputs: | 32 |
| Analog inputs: | 32 SE / 16 Diff |
| Analog outputs: | 2 |
| Operating temperature: | 0 ~ +60 °C |
Specifications
| Hardware | |
|---|---|
| Connector | Female DB37 x 1 20-pin box header x 2 |
| Card ID | Yes (4-bit) |
| Analog Input | |
| Channels | 32 single-ended/16 differential |
| Range | Gain: 1, 2, 4, 8 Bipolar Range: ±10 V, ±5 V, ±2.5 V, ±1.25 V |
| Resolution | 16-bit |
| Accuracy | 0.05 % of FSR ±1 LSB @ 25 °C, ±10 V |
| Sampling Rate | 250 kS/s. Max. |
| Overvoltage Protection | Continuous ±35 Vp-p |
| Zero Drift | 15 ppm/°C of FSR |
| FIFO Size | 8192 samples |
| Trigger Mode | Software, Pacer |
| Data Transfer | Polling, Interrupt |
| Analog Output | |
| Channels | 2 |
| Range | -5 V ~ 5 V , -10 V ~ 10 V, 0 ~ 10 V, 0 ~ 5 V |
| Resolution | 16-bit |
| Accuracy | ±6 LSB |
| Response Time | 250 KHz (Typical) |
| Voltage Output Capability | ±5 mA |
| Slew Rate | 0.7 V/μs |
| Operation Mode | Static Update |
| Digital Input | |
| Channels | 32 (Bi-Direction) |
| Type | 5 V/TTL |
| ON Voltage Level | 2.0 V Min. |
| OFF Voltage Level | 0.8 V Max. |
| Response Speed | 1.0 MHz (Typical) |
| Pull-high/Pull-low Resistors | Yes |
| Trigger Mode | Static Update |
| Digital Output | |
| Channels | 32 (Bi-Direction) |
| Type | 5 V/TTL |
| Operation Mode | Static Update |
| Load Voltage | Logic 0: 0.4 V Max. Logic 1: 2.4 V Min. |
| Load Current | Sink: 40 mA Source: 20 mA |
| Response Speed | 1.0 MHz (Typical) |
| DO Readback | Yes |
| PC Bus | |
| Type | 3.3 V/5 V Universal PCI, 32-bit |
| Data Bus | 16-bit |
| Power | |
| Consumption | 1 A @ +5 V (Max.) |
| Mechanical | |
| Dimensions (mm) | 150 X 170 X 22 (W x L x D) |
| Environment | |
| Operating Temperature | 0 ~ +60°C |
| Storage Temperature | -20 ~ +70°C |
| Humidity | 5 ~ 85% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Prijava