MN-DA2-DIN Distributed Motionnet 2-ch ±10 V Analog Output Module
Dual-channel ±10 V, 16-bit analogue output module for distributed Motionnet networks, with an RJ-45 communication port, 2-way isolation and DIN-rail mounting.
- Two channels of ±10 V analogue output with 16-bit resolution
- Software offset and gain calibration
- Slew rate of 20 V/µs and DNL ±1 LSB, INL ±3 LSB
- RJ-45 Motionnet communication port, selectable 2.5, 5, 10 or 20 Mbps by DIP switch
- 2-way isolation on power and communication; 1000 V isolated power input
- Output capability ±20 mA max per channel
271,00 € per piece
| 1–9 pcs | 271,00 € | |
|---|---|---|
| 10–30 pcs | 263,00 € | −3 % |
| 31+ pcs | 257,00 € | −5 % |
Informacije o izdelku "MN-DA2-DIN Distributed Motionnet 2-ch ±10 V Analog Output Module"
The MN-DA2-DIN CR is a DIN-rail mounted Motionnet I/O module that provides two analogue output channels in the ±10 V range. It suits engineers who need distributed analogue control points on a Motionnet network without dedicating CPU time to I/O status updates, which the hardware handles automatically.
Each channel offers 16-bit resolution, with DNL of ±1 LSB and INL of ±3 LSB, and a slew rate of 20 V/µs. Offset and gain are calibrated in software. Power and communication are isolated from each other, and the module is rated for 24 VDC ±5% input with 1000 V isolation.
Communication runs through an RJ-45 port, and the transfer speed is selectable at 2.5, 5, 10 or 20 Mbps by DIP switch. The module is rated for 0 ~ +60 °C operation and carries CE, UKCA, RoHS and WEEE markings.
Applications
- Distributed analogue output control on Motionnet networks
- Expansion of analogue output points, up to 128 per communication port with 64 modules
| Product type: | Analog output module |
|---|---|
| Interface: | RJ-45 |
| Protocol: | Motionnet |
| Analog outputs: | 2 |
| Isolation: | 2-way |
| Power input: | 24 VDC ±5% |
| Operating temperature: | 0 ~ +60 °C |
| Mounting: | DIN-rail |
| Housing: | Plastic |
Specifications
| LED Indicators | |
|---|---|
| Status | Communication state (Link, Error) Internal 3.3 V Power Termination Resistor Switch |
| Analog Output | |
| Channels | 2 |
| Range | +/- 10 V |
| Resolution | 16-bit |
| Accuracy | DNL = +/- 1 LSB INL = +/- 3 LSB |
| Response Time | Slew rate: 20 V / us |
| Voltage Output Capability | +/- 20 mA Max per channel |
| Calibration | Offset: provided by software Gain: provided by software |
| Motionnet | |
| Transfer Speed | Selectable 2.5, 5, 10 or 20 Mbps by DIP Switch |
| Cyclic Time | 15.1 μs per device (20 Mbps) |
| Power | |
| Input Range | 24VDC +/-5% (1000 V isolated) |
| Consumption | 3 W Max. |
| Mechanical | |
| Casing | Plastic |
| Dimensions (mm) | 75mm x 90mm x 57 mm (W x L x H) |
| Installation | DIN-Rail Mounting |
| Environment | |
| Operating Temperature | 0 ~ +60 °C |
| Storage Temperature | -20 ~ +80°C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Prijava