ECAT-2513 4-Port EtherCAT Junction SubDevice Module
4-port EtherCAT junction SubDevice module that lets engineers wire daisy-chain networks as branches, with up to 100 m between stations over 100BASE-TX.
- Up to 100 m between stations over 100BASE-TX
- One IN and three OUT RJ-45 ports for branch wiring
- Supports daisy-chain and star connection
- EtherCAT conformance test tool verified
- 4 KV contact ESD protection on each port
- Reverse polarity protection, +10 ~ +30 VDC input
176,00 € per piece
| 1–9 pcs | 176,00 € | |
|---|---|---|
| 10–30 pcs | 170,00 € | −3 % |
| 31+ pcs | 167,00 € | −5 % |
Informacije o izdelku "ECAT-2513 4-Port EtherCAT Junction SubDevice Module"
The ECAT-2513 CR is a 4-port EtherCAT junction SubDevice module for building flexible EtherCAT networks. It accepts one inbound connection and offers three outbound RJ-45 ports, so a daisy-chain run can be split into branches, which simplifies cabling in machines and panels.
Splitting a network into separately wired sections limits the impact of a fault. If a SubDevice stops responding or a cable is disconnected, only the devices in that section are affected, and the rest of the network can continue to communicate with the Main Device controller. This makes commissioning and fault finding quicker, since each section can be checked on its own.
The module supports daisy-chain and star connections, and is designed for DIN-rail mounting in a plastic housing with reverse polarity protection on its +10 ~ +30 VDC supply. The source material also describes a ring-based cable redundancy topology for this product family, which keeps the control system running if a cable fails on one side.
Applications
- Converting daisy-chain EtherCAT networks into branch topologies
- Sectioning EtherCAT networks to isolate faults and speed up debugging
- Cable redundancy using a ring topology
- Distributed machine and panel wiring with DIN-rail installation
| Product type: | EtherCAT junction SubDevice module |
|---|---|
| Interface: | RJ-45 |
| Protocol: | EtherCAT |
| Ports: | 4 |
| Power input: | +10 ~ +30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
| Housing: | Plastic |
Specifications
| EtherCAT | |
|---|---|
| Ports | 4 x RJ-45 (1 IN; 3-OUT) |
| No. of Nodes | 2 |
| Distance Between Stations | Max. 100 m (100BASE-TX) |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | +10 ~ +30 VDC |
| Consumption | 0.06 A @ 24 VDC |
| Mechanical | |
| Casing | Plastic |
| Dimensions (mm) | 33 x 127 x 90 (W x L x H) |
| Installation | DIN-Rail |
| Environment | |
| Operating Temperature | -25 ~ + 75 °C |
| Storage Temperature | -30 ~ + 80 °C |
| Humidity | 10 ~ 90% RH, non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Prijava