AR-200 Accelerometer Data Logger, 2-ch IEPE Input
Two-channel IEPE accelerometer data logger with 16-bit ADC, sampling up to 200 kHz per channel and Micro SD storage for offline vibration analysis.
- Two simultaneous 16-bit ADC channels for IEPE accelerometers, with built-in 3 mA excitation current
- Sampling rates up to 200 kHz per channel
- Flexible triggering: push button, schedule, analog threshold, digital input and remote utility trigger
- Records to 4 to 32 GB micro SDHC card, with a maximum recording time of 30 minutes
- Single Form A relay output rated 5A@250 VAC or 5A@30 VDC
- 4 kV contact ESD protection on any terminal
600,00 € per piece
| 1–9 pcs | 600,00 € | |
|---|---|---|
| 10–30 pcs | 582,00 € | −3 % |
| 31+ pcs | 570,00 € | −5 % |
Informacije o izdelku "AR-200 Accelerometer Data Logger, 2-ch IEPE Input"
AR-200 CR is a dynamic signal acquisition module for vibration monitoring and analysis. It accepts two IEPE accelerometers, each supplied with a built-in 3 mA excitation current, and digitises the signals with a 16-bit converter. Sampling of both channels runs simultaneously, at rates up to 200 kHz per channel.
Recordings are written to a Micro SD card, so data can be taken away and analysed offline. Capture can be started by a push button, a schedule, an analog threshold, a digital input or a remote command from the supplied utility on a host PC, which also lets you set the sampling rate and scheduling for each application. A single relay output and one digital input add basic event handling to the unit.
The logger suits panel or machine installations that need to run unattended. It works from a wide +10 to +30 VDC supply, operates from -25 to +75 °C, and provides 4 kV contact ESD protection on all terminals. Mounting is by wall or DIN-rail.
Applications
- Vibration monitoring and analysis
- Industrial automation
- Factory automation
- Process automation
| Product type: | Accelerometer data logger |
|---|---|
| Interface: | Ethernet, Micro SD |
| Digital inputs: | 1 |
| Relay outputs: | 1 |
| Analog inputs: | 2 |
| Ports: | 1 |
| Power input: | +10 to +30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | Wall, DIN-rail |
Specifications
| LED Indicators | |
|---|---|
| Status | 1 x PWR 1 x DAQ 1 x SD |
| Analog Input | |
| Channels | 2 (simultaneous sampling) |
| Type | IEPE |
| Range | Voltage: ±10 V Current: 3 mA |
| Resolution | 16 bit |
| Sampling Rate | 5, 10, 20, 50, 100, 125, 200 (kHz)P |
| Trigger Mode | Push-button triggering, timed triggering, threshold triggering, digital input triggering, remote triggering by utility software |
| Digital Input | |
| Channels | 1, Dry Contact: Source / Wet Contact: Sink or Source |
| ON Voltage Level | Dry: Close to GND Wet: +10 VDC to +50 VDC |
| OFF Voltage Level | Dry: Open Wet: +4 VDC max |
| Relay Output | |
| Channels | Form A x 1 |
| Type | Power Relay |
| Contact Rating | 5A@250 VAC (47 ~ 63 Hz) 5A@30 VDC |
| Operate Time | 10 ms |
| Release Time | 5 ms |
| Electrical Endurance | 100,000 times min |
| Mechanical Endurance | 20,000,000 times min |
| Ethernet | |
| Ports | 1 x RJ-45, 10/100Base-T(X) |
| Power | |
| Consumption | 4.3 W |
| Mechanical | |
| Dimensions (mm) | 197 x 139 x 57 (W x L x H) |
| Installation | Wall mounting, rail type |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ 80 °C |
| Humidity | 10 ~ 90% RH, non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Prijava