WISE-7167 Intelligent I/O Module with 8-ch Power Relay and PoE
WISE-7167 is a web-configured intelligent I/O module with 8 power relay outputs and IEEE 802.3af PoE, running IF-THEN-ELSE logic and Modbus TCP for SCADA integration without programming.
- Browser-based configuration with no extra software tool required
- IF-THEN-ELSE logic rules (36 rules supported) without programming
- 8-channel power relay outputs, 5 A @ 250 VAC/24 VDC (resistive load)
- IEEE 802.3af Class 1 Power over Ethernet, plus 12 ~ 48 VDC terminal block input
- Modbus TCP protocol for SCADA system integration
- I/O channel monitoring and control with timer operations (12 sets supported)
227,00 € per piece
| 1–9 pcs | 227,00 € | |
|---|---|---|
| 10–30 pcs | 220,00 € | −3 % |
| 31+ pcs | 215,00 € | −5 % |
Informações de produto "WISE-7167 Intelligent I/O Module with 8-ch Power Relay and PoE"
WISE-7167 is a browser-configured I/O module for remote logic control and monitoring. Its built-in web pages let engineers build IF-THEN-ELSE control rules without writing code or installing extra software, which shortens commissioning on small and medium automation projects.
The module provides eight power relay outputs (Form A, SPST N.O.), each rated 5 A @ 250 VAC/24 VDC for resistive loads. It can be powered from an IEEE 802.3af Class 1 PoE network over a standard Category 5 cable, or from a 12 ~ 48 VDC terminal block where PoE is not available, which helps reduce cabling and the need for local outlets.
For supervision, the WISE-7167 supports Modbus TCP for integration with SCADA software, along with I/O channel monitoring and control, timer operations, CGI command sending and non-SSL email notifications.
- Target use: building, factory and machine automation, remote maintenance and diagnosis
Applications
- Building Automation
- Factory Automation
- Machine Automation
- Remote Maintenance
- Remote diagnosis and Testing Equipment
| Product type: | Intelligent I/O Module |
|---|---|
| Interface: | Ethernet |
| Protocol: | Modbus TCP |
| Relay outputs: | 8 |
| Ports: | 1 |
| PoE: | Yes |
| Isolation: | 3000 VDC |
| Power input: | 12 ~ 48 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail, Wall |
Specifications
| Software | |
|---|---|
| Protocol | • Modbus TCP • CGI Command (Sending) |
| Function | • Web Interface for Configuration • IF-THEN-ELSE Logic operation (36 rule supported) • I/O channel monitoring and control • Timer operation (12 set supported) • Internal Register operation (48 set supported) • Recipe operation (12 set supported) • Advanced P2P (8 set supported) • non-SSL Email sending function |
| CPU Module | |
| CPU | 16-bit CPU (80 MHz) |
| Isolation | |
| Intra-module Isolation | 3000 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±2 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for each terminal and ±8 kV Air for random point |
| Surge (IEC 61000-4-5) | ±0.5 kV for Power Line |
| LED Indicators | |
| Status | 1 x PoE Power 1 x System Running 1 x Ethernet Link/Act 1 x Ethernet 10/100M Speed |
| Relay Output | |
| Channels | 8 |
| Type | Power Relay, Form A (SPST N.O.) |
| Contact Rating | 5 A @ 250 VAC/24 VDC (Resistive Load) |
| Operate Time | 10 ms (max.) |
| Release Time | 5 ms (max.) |
| Electrical Endurance | 100,000ops. |
| Mechanical Endurance | 20,000,000 ops. |
| Ethernet | |
| Ports | RJ-45 x 1, 10/100 Base-TX and automatic MDI/MDI-X |
| PoE | Yes |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | 12 ~ 48 VDC |
| Consumption | 3.3 W |
| Powered from PoE | Yes, IEEE 802.3af, Class 1 |
| Powered from Terminal Block | Yes, 12 ~ 48 VDC |
| Mechanical | |
| Dimensions (mm) | 72 x 123 x 35 (W x L x H) |
| Installation | DIN-Rail Mounting/Wall Mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Iniciar sessão